LumberJocks

LumberJocks Woodworking Reviews

  • Advertise with us
Quality is quality, good design is good design, both make life easier

Quality is quality, good design is good design, both make life easier

07-10-2012 02:20 PM by Woodwrestler | 75 comments »

I am somewhat new to woodworking but have done a few successful projects. Much of what I have had to do is break down large sheets for cabinet projects in the shop, built in cabinets, etc. Trying to do that by yourself on a table saw is difficult and I just can’t seem to get my wife interested in helping ;-). There is always a debate about the cost of tools and value. Time for me is the most precious resource. Consequently, as someone that is earlier in their woodworking journey,...

Read this review »


Hitachi Table Saw

Hitachi Table Saw

01-19-2008 06:12 PM by Obi | 74 comments »

On first look the Hitachi C10Fl looked like a great deal but after using it for 2 years the following has become evident: FOR EVERYONE WHO THINKS I PUT THE DUST COLLECTION ON FACING THE WRONG DIRECTION !!! NOTE THAT THE PORT IS OPPOSITE THE OPERATOR. THE PORT WAS INSTALLED ACCORDING TO THE INSTRUCTIONS. Rated according to the manufacturer at 3 hp found out that it is actually 1 1/2 HP a bold faced lie that they should be sued for. This is a terrible design, and although bigger and be...

Read this review »


So VERY Thankful no one was hurt!!

So VERY Thankful no one was hurt!!

12-01-2013 03:02 AM by CFrye | 68 comments »

This could have easily become the most expensive tool in the shop! We bought this adjustable circle cutter a few weeks ago at Harbor Freight. Seemed like it’d be a useful little tool. I’d set it up once on the drill press and used it to drill a test hole on a piece of pine. The arms sticking out spinning around made me kind of uneasy so I switched to a hole cutting saw bit. My husband set the cutter up today on the DP and was using it. One of the cutters came loose during operatio...

Read this review »


Harbor Freight junk

Harbor Freight junk

12-06-2013 05:28 PM by SigThrottle | 68 comments »

I’ve owned this planer a while now and would not recommend it to anyone. The handle doesn’t tighten all the way and the screw comes loose after a few strokes. There is no real lateral adjustment, instead there are a pair of screws that hold the blade quite clumsily. The screws also aren’t straight. There s no chip breaker so the only pressure on the blade is a lump of metal and a pressure screw that is prone to failure. The redeeming qualities are it’s price ($12 that ...

Read this review »


Questionable Warranty

Questionable Warranty

01-17-2013 11:17 PM by Grumpymike | 65 comments »

I purchased a Ricon 10-325 bandsaw on November 23, 2011 And let me say that I was in hog heaven; however today I discovered that one of the guide bearings was frozen, and I called Ricon Tech Support to request a new bearing under the five year warranty. I was also informed that my saw was not under warranty. The Tech Support Specialest I spoke with was a very well mannered and patient young fellow named Jarred, he informed me that these bearings “are a ‘consume-able’ part...

Read this review »


Central Machinery 10" Industrial Cabinet Saw

Central Machinery 10" Industrial Cabinet Saw

01-21-2010 02:06 AM by dustbunny | 64 comments »

I know your probably thinking…”HF, if it’s anything like some of the other things they sell, it’s not worth it” But read on…I was very reluctant to buy this saw, and debated about it for several months. Then HF had a 25% discount coupon the day after Christmas, only to be used on New Years Day. I figured the math and this TS was going to cost $562.50, original price $750.00. So I bit the bullet and ordered it.The specs-3 HP motor, 230V, single phase; Max. s...

Read this review »


Craftsman 10” Contractor Table Saw Model 21833 - Alignment

Craftsman 10” Contractor Table Saw Model 21833 - Alignment

06-01-2010 09:38 PM by smitty22 | 63 comments »

Previous review by Bobthebuilderinmichigan and good info from BoardRunner are here:http://lumberjocks.com/reviews/1225After a few months and a couple of projects with this saw, here are some observations ;In short, the 351-218330 seems a very good table saw for the price, with most everything I needed included. The rip fence is very good for a saw in this price class, and with a good after-market miter gauge (I caught the Incra 120 on sale) and an upgraded blade, performance is very good. ...

Read this review »


Barely cuts 3/4 inch oak ISSUE RESOLVED!!

Barely cuts 3/4 inch oak ISSUE RESOLVED!!

09-16-2013 06:49 AM by Mongolas | 63 comments »

Okay, so after not having a table saw for about 4 months since we moved and had to leave my brother’s 89 dollar pro-tech saw behind, my wife finally decided to get me the Grizzly G0715P. All in all, I would rate the actual saw a 4 out of 5. I gave it 3 stars because of the lack of power. I found an extention cord, cut to a shorter length, to act as my wire for my 110v re-wire, since the apartment I’m in said I can’t install a 220v outlet for it. so I got the 6 dollar cir...

Read this review »


Big Bang For Buck Belt Sharpener

Big Bang For Buck Belt Sharpener

01-13-2013 08:12 PM by HorizontalMike | 62 comments »

I had been toying with the idea of getting into Woodturning for some time and the opportunity presented itself, so I started some serious planning. One of the things that goes along with Woodturning is the ability to sharpen your own turning tools. At the time I did NOT own a mechanized sharpening machine/system and had to rely on manually sharpening all of my planes and chisels with the “Scary Sharp” sandpaper to stone methodology. Don’t get me wrong, that system works a...

Read this review »


CHARLES NEIL BLOTCH CONTROL

CHARLES NEIL BLOTCH CONTROL

05-11-2010 09:51 PM by a1Jim | 61 comments »

Hey friends and neighborsI received my can of Charles Neils Blotch control almost a week ago and I have been waiting to give it a try due to my work schedule I decided to give it a go on some poplar knowing it’s one of the worst woods to blotch when stain is applied.I sanded this six quarter piece of poplar as I would preparing for staining for all woods I’m about to finish going through the grits up to 220 grit as the instructions suggest. I then applied a first coat of blotch c...

Read this review »


« prev 1 2 3 4 5 ... 455 next »
4545 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com