LumberJocks

Reviews: Oneida

  • Advertise with us
Review of Dust Deputy by Oneida

Review of Dust Deputy by Oneida

03-30-2013 04:24 PM by Todd A. Clippinger | 56 comments »

I bought my Dust Deputy 3 years ago and have been using it regularly since then. Many of you have probably looked at the Dust Deputy and considered purchasing the plastic cyclone with some hesitation, unsure of how it really performs. In this video I give some good context as to how I use it, with what tools, and how I have it set up. I also open up the Dust Deputy bucket to show how much dust is inside after 3 months of use, and then I open the shop vacuum to see how much dust made it pas...

Read this review »


The only WW machine I've regretted to date

The only WW machine I've regretted to date

04-18-2016 02:33 AM by Bear1219 | 23 comments »

-1 star for poor fit and finish-1 star for constant sensor failure-1 star for poor customer service I’m usually very happy with all the major woodworking machines I’ve bought, with the exception of my dust collector. It has been the biggest regretted/mistake I’ve made to date. The pictures speak more then words. Before anyone says anything, Yes I did assemble the unit correctly and spent a lot of time doing so making sure it was correct. All connections either have silico...

Read this review »


$39 DIY Dust Deputy arrival

$39 DIY Dust Deputy arrival

02-26-2013 01:45 AM by Holbs | 22 comments »

I read up on previous history threads about the little Dust Deputy and the top part coming apart due to issues with the epoxy or glue or whatever it is they use to attach.Ordered on the 17th and arrived on the 25th (i was in no hurry so went USPS ground).Official part # : 149952 / Molded Plastic DIY Dust Deputy for $39 + shipping.http://www.woodcraft.com/product/2021015/26326/oneida-diy-molded-dust-deputy-cyclone.aspx I’m making this review so that other new woodworkers know they hav...

Read this review »


Dust Collection Upgrade

Dust Collection Upgrade

02-05-2013 07:12 PM by TheDane | 20 comments »

I have wanted a two-stage dust collection system for some time, so decided to take the leap and order an Oneida Super Dust Deputy. The Super Dust Deputy (SDD) was well packed and everything (SDD, installation bolts, foam gasket, and the 5”-to-4” and 6”-to-4” reducers) was packed in a single box surrounded by plastic and foam. Because of the lid I opted for, I substituted the bolts Oneida provided with 1/4” x 20 tpi x 2 1/2” that I had on hand in the shop...

Read this review »


Oneida Super Dust Deputy

Oneida Super Dust Deputy

07-16-2012 09:48 PM by tme4tls | 17 comments »

I have been fighting with my Oneida Pro 2000 since I bought it. Seems a lot of dust passes the cone and lands in the filter clogging it and making dust collection inefficient. So much so I have to take the filter outside at least once a week and blow it out with an air line the reinstall. For my drill press I purchased a Dust Deputy and use it on with a shop vac. It works wonderfully. There isn’t enough material that gets by the Dust Deputy to measure in the shop vac, so I conclu...

Read this review »


Oneida Dust Deputy Cyclone

Oneida Dust Deputy Cyclone

08-24-2016 02:19 AM by richimage | 15 comments »

The SDD replaces a “Frankenvac” HF through a Thein separator to a plastic barrel, using Rockler quick-connects to each tool. I replaced the HF impeller with the Rikon, and what a difference! I am blessed to be able to just vent outside, so fine filtration is not a concern. The assembled collection corner is amazingly quiet, and has quite a lot ( don’t have the ability to measure airflow) of suction – even on the far end where the SawStop lives. I read of so...

Read this review »


I finally took the plunge

I finally took the plunge

04-19-2013 04:59 PM by bubbs | 14 comments »

I’ve been tinkering with the idea of getting a Dust Deputy for a long time. I finally took the plunge. I’m not going to say too much about it, other than I am extremely pleased with its operation. I can’t believe how well it works, and I’d recommend it to anyone. As you can see from the photos, my shop partner, Phoebe, approves as well. Her newest thing is to watch proceedings from the deep sink. Bubbs

Read this review »


Super Dust Deputy Add on for 4" DC systems

Super Dust Deputy Add on for 4" DC systems

05-06-2012 01:54 AM by TechRedneck | 12 comments »

While researching this product, I noticed that there was not a review on LJ’s for this specific model of cyclone. I have a smaller ClearVue Mini and absolutely love it, however there were few choices on the market for cyclones specifically made for the majority of small DC systems out there in the 1-2 HP range. I think that Oneida has something here for that niche market. In fact, I am surprised yet pleased that they made one of these available because it can directly compete with ...

Read this review »


Great cyclonic dust separator

Great cyclonic dust separator

05-29-2012 02:49 AM by Alexandre | 10 comments »

The dust deputy is a great dust separator for my Ridgid shop vac.I gave it 4 stars out of 5 because for a few reasons:1. It’s really unbalanced without a cart when you move it2. Its pretty awkward moving it unless you build a cart.3. Static electricity during dry times is a pain and a hassle as some dust gets in because it tends to stick to the cyclone.4. The container fills up quickly, probably a 35 gal drum would be nice.5. The price is pretty high for a piece of moulded plastic and 2...

Read this review »


Oneida Super Dust Gorilla - 5 HP

Oneida Super Dust Gorilla - 5 HP

07-29-2016 12:42 PM by Redoak49 | 10 comments »

Several months ago, I purchased a new dust collector. Before, I had a Jet 1.5 HP dust collector with a cartridge filter and vortex cone. It did an OK job and was piped into my shop with 4” PVC. My measurements of the flow at the dust collector were 670 CFM at the 6” port and only 450 CFM at the 4” port. The maximum static pressure was 10.25” Inside my shop, the flow was greatly reduced. I decided that I needed something bigger to collect more of the dust and so looked at a number of t...

Read this review »


1 2 next »
15 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com