LumberJocks

Reviews: Delta

  • Advertise with us
Unisaw- Check it out if your in the market for what could be a good deal (Indiana)

Unisaw- Check it out if your in the market for what could be a good deal (Indiana)

03-07-2008 09:46 PM by coolbreeze | 4 comments »

http://cgi.ebay.com/Delta-Unisaw-table-saw-w-50-Biesemeyer-fence-tablesaw_W0QQitemZ330217435255QQihZ014QQcategoryZ57124QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Read this review »


Pictures for Alba

Pictures for Alba

11-25-2010 07:15 PM by Bluepine38 | 10 comments »

I mentioned a cross slide rest to Alba thinking it might help him and his “Jolly Rogues” in some way. He askedme to show some pictures, so here are the pictures and my review, I will do a blog on the rebuild of this wonderful old machine later. The Cross Slide Rest was originally made by Delta to enable people to do metalwork on a lathe. I am a 71 year young craftsman with a slightly hard used body, I just did not think my parts would wear out this quick, so I have a little pro...

Read this review »


Accuracy out of the box

Accuracy out of the box

07-24-2008 05:54 PM by Michael Brailsford | 11 comments »

I have owned a Rockwell Unisaw for 4 years now. I bought it used from the US Army. It had the original fence on it. It was a constant job to keep it aligned and semi accurate. I recently was able to purchase the Delta 36-U30 Unifence. I took only about an hour to assemble it. It was amazing after I was done to do my first test cut. I set the curser at 6” and made my cut and low and behold it came out to six inches. Coming from what I just had all I could say was WOW! With my o...

Read this review »


Great mid range dust collecter.

Great mid range dust collecter.

06-01-2010 06:55 AM by thatwoodworkingguy | 7 comments »

I wanted to upgrade my dust collection for a shop vac to the real deal.I always trust delta machinery so I thought this was a good way to go. I headed right over to woodcraft and I saw this shiny beast. I purchased it that day along with the appropriate fittings and hoses. woodcraft has an amazing supply of dust collection accessories I might add!I got home and began to assemble the unit. There is a moderate amount of assembly but the instructions for once are actually helpful. I would sugges...

Read this review »


Wicked Awesome Saw!

Wicked Awesome Saw!

05-10-2016 11:42 PM by vulgarviking | 9 comments »

Ok. I apologize for the Bostonian title. It won’t happen again. Lol! So after about 6 months of research, looking at saws by going to tool dealers, Craigslist post, consignment shops and so on… I settled on the 36-725. My wife figured out the saw I wanted and got me the 36-5000! She figured it was better and I wasn’t about to argue. So on to the review: There’s not much more that I can say that hasn’t already been said about the 36-725. Differences are th...

Read this review »


my new toy

my new toy

05-07-2010 03:38 AM by bigjerpare | 12 comments »

just picked this beauty up today, runs great, and looks cool

Read this review »


 great little workhorse for the money

great little workhorse for the money

12-24-2008 07:32 PM by teenagewoodworker | 6 comments »

I got this planer a few months ago and since i got it i have been giving it a lot of work. i have probably run close to 200 bf through this planer and i am still on my first set of knives. which is good considering some of the woods i’ve put through it including hickory which is a demon to any blade. its is a nice little powerhouse though. it works wonderfully and has the power to take the full 1/16” off of any board with ease. it is very heavy duty too. i have stood on it before ...

Read this review »


Happy With My First Blade Purchase

Happy With My First Blade Purchase

11-16-2009 07:03 AM by Jimi_C | 8 comments »

So as promised (in Knottscott's review of the Delta 35-7657), here’s my review of its 60-tooth cousin. The night Scott reviewed that blade, I noticed Tooliday had the 60-tooth version up for $25, plus $5 S/H. I had been looking at Freud blades that were about $20-30 more, so I thought what the heck, I’ll give it a shot. I’ve been using a single 40-tooth blade for everything (came with the tablesaw I bought used of Craigslist), along with painters tape to keep the chippin...

Read this review »


Jointer Blades from Infinity Cutting Tools

Jointer Blades from Infinity Cutting Tools

03-17-2015 07:25 PM by frosty50 | 5 comments »

I was very impressed with Infinity Cutting Tools customer service. I ordered a set of new blades for my jointer as they were in desperate need of replacing. My son had used the jointer and the results were several nicks in the blade at least 1/16” in depth. My local sharpening shop recommended replacement do to the damage. I ordered them on-line and Infinity processed the order within a day and I received them through the mail within the allotted time. I was excited to get back to the s...

Read this review »


Hopefully this will be an awesome jig, once I finish making it.

Hopefully this will be an awesome jig, once I finish making it.

07-11-2016 12:27 AM by vulgarviking | 14 comments »

Having too many beers, Amazon Prime and one touch ordering on my Amazon account resulted in my delivery of the DELTA 34-184 Universal-Deluxe Tenoning Jig this Sunday morning.So onto the rant….umm? I mean review. Unboxing and light assembly, this jig seemed pretty decent, until I put it on my saw. Holy shit did it wobble! The bottom plate is a 3/8 cast iron plate with weight reduction recesses underneath it. And the surface is not machined at all, but instead finished with a heavy on...

Read this review »


« prev 1 ... 5 6 7 8 9 next »
82 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com