LumberJocks

Reviews: Delta

  • Advertise with us
Delta 22-580 13-Inch Benchtop Planer

Delta 22-580 13-Inch Benchtop Planer

01-28-2008 01:17 AM by GaryK | 25 comments »

I have had this planer for going on 2 years now. I have nothing but praise for it.I got it used but like new condition. It has 2 sppeds. A dimensioning speed of 60 cpi allows you to shave rough wood to its desired thicknessquickly with no snipe. Then a quicker finishing speed of 90 cpi, your wood comes out ultrasmooth and ready to go. The double-sided M2 steel knives are powered by a 15 amp, 120-volt, single-phase motor. It has a blade zero indicator (which lets you set the cutterhead t...

Read this review »


Delta 36-725 Contractor Table Saw

Delta 36-725 Contractor Table Saw

03-11-2014 03:58 PM by thetinman | 114 comments »

EDIT: THIS REVIEW WAS EDITED ONLY TO ADD LINKS TO THE FOLLOW UP REVIEW AND ADDITIONS THAT WERE ADDED. FOLLOW UP REVIEW: http://lumberjocks.com/reviews/3881 TABLESAW ADDITIONS: http://lumberjocks.com/projects/101376 A few friends and I share our shops and the fun of woodworking. Among us we have a diversity of age, knowledge, woodworking experience and financial flexibility. Among us there exists a wide verity of table saw types and brands. Only one of us has the luxury of a true ca...

Read this review »


Nice small jointer for lightweight work

Nice small jointer for lightweight work

12-09-2008 07:57 PM by ferstler | 18 comments »

As a retired person who was a relative newcomer to the hobby, this was the first tool of this type that I purchased, and I had hopes that it would do what I needed in the way of hobby-grade woodworking. (I will use the terms jointer and planer interchangeably in this review.) Unfortunately, the short length of the aluminum table sections (spanning just 30 inches) made it difficult for the device to do a good job planing longer boards. In addition, the lack of a solid, two-sided lockdown with ...

Read this review »


Excellent Saw, Great Power, Good Price

Excellent Saw, Great Power, Good Price

01-29-2008 04:30 AM by wildbill903 | 9 comments »

I purchased the 10” Hybrid saw in December last year, so it has been in the shop fewer than two months. But in these two months we have grown quite close. My wife named her “Biesy Baby” after the fence.I’ll touch on a few of the more important points in my review of the saw, and hopefully add some insight into your shopping experience. Features: The saw came, as the name states, with the left tilt feature. Two noted luxuries this affords are in large mitred-edge ...

Read this review »


Delta 1950's 4" Jointer - Rebuild

Delta 1950's 4" Jointer - Rebuild

01-31-2008 07:31 PM by Gary Ratajczak | 11 comments »

I thought I would post a review of a “vintage” tool I refurbished a few months back. I currently have a small shop, and was looking at bechtop jointers. Happened to mention my search at the office, and one of the guys indicated he had an old jointer that he was no longer using. After $50.00, and his help to lift it into my truck, I was off on a re-furb project. As the price of new tools continues to rise, along with the cost of fuel and food, I think there is more opport...

Read this review »


Delta 50-760 best dust collector of its class

Delta 50-760 best dust collector of its class

06-11-2008 08:24 AM by Woodshopfreak | 11 comments »

Wow, is all I have to say. This was a part graduation part birthday present and I have to say I love this thing. It has made my woodworking experience a whole lot better. I bought about fifty feet of PVC and ran it along all the walls in my shop connecting it to my jointer, table saw, bandsaw, router table, and put in a handy floor sweep. I even put in a shop vac port that can hook right up to a shop vac hose and I can use it for my miter saw or for sanding or routing. I installed blast gates...

Read this review »


Delta 36-714 10-Inch left Tilt Hybrid Saw

Delta 36-714 10-Inch left Tilt Hybrid Saw

10-02-2009 10:23 PM by cstrang | 5 comments »

This is a good bang for your buck, when I originally purchased the saw I got it for around $1200, it is a little more pricy today but none the less a good buy. It comes wired for 120 from the manufacturer but when I received it I got my electrician friend to ramp it up to 240, not much that I have in my shop can bog it down now. In my old High school we had a saw just like this one with the sole difference of it being connected to standard 120, I notice a big difference between them, if you h...

Read this review »


Delta 50-760 1 1/2 HP Dust Collector - Not so Pleased

Delta 50-760 1 1/2 HP Dust Collector - Not so Pleased

03-12-2009 11:01 PM by CharlieD | 33 comments »

I see several satisified user with good reviews on this product. However it has a flaw that bugs me, and is not acceptable. I bought one new in December. The unit does a very good job with collection, is reasonably quiet and I’m happy with that. But new, right out of the box I found a problem. The rod that holds up the dust filter bag attaches to the top/side of the unit’s housing. The first time I moved the unit the rod hung on an over head beam and even though it wasnR...

Read this review »


A GREAT SAW

A GREAT SAW

01-27-2008 09:45 PM by bfd | 11 comments »

In my opinion you can’t buy a better saw for the money when it comes to quality. I disagree with the other post on one point calling this a great saw for a beginner. I think it is a great saw period! I don’t concider myself a beginner nor do I concider myself a pro by any means but somewhere in the middle like most. With that said I don’t think this saw will be a purchase that I will regret or out grow any time soon. I opted for the 30” Beisemeyer Fence and have upgr...

Read this review »


Delta 46-460 12-1/2" Variable-Speed Lathe and Optional Stand

Delta 46-460 12-1/2" Variable-Speed Lathe and Optional Stand

12-24-2009 03:37 AM by Padre | 11 comments »

I purchased this lathe two weeks ago when it was on sale at Woodcraft. I brought it home, opened it up, and set it up. It took about an hour to completely set it up. The lathe stands level and true, and the tail stock/head stock are perfectly aligned. It is a variable speed, but some belt changes are needed for different speed “ranges.” It is a cinch to change the belt. Picture #2 shows how you pull a lever, change the belt, re-tighten the lever, and off you go. It is a...

Read this review »


1 2 3 4 ... 8 next »
76 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase