LumberJocks

Reviews: DeWalt

  • Advertise with us
Save Your Money

Save Your Money

10-13-2009 11:17 PM by cstrang | 8 comments »

I bought these blades as a set about a year ago now, however they did not last that long in my saw, they stayed in my miter saw and table saw for about a week and then they found a new home on my blade rack only to be taken down for the odd occasion when I build a deck. I paid about $40.00 for this two-pack of blades and they aren’t even worth that in my mind, but I was looking for a good deal and this popped right up. I find that the yellow strip makes more friction than anything else and it...

Read this review »


Heavy, Heavy Duty, and a Very Good Performer

Heavy, Heavy Duty, and a Very Good Performer

08-31-2009 10:02 PM by PurpLev | 36 comments »

After getting a Jointer, I realized very quickly that I should have gotten a planer FIRST. I was able to flatten a board, and joint an edge, but that is something that I can do fairly easily with hand planes. thicknessing that board on the other hand is sometimes a bit more challenging to do by hand – especially when you have multiple boards to mill. Price I have limited funds, and so visit craigslist often for tools. I was actually not expecting to find the Dewalt 735 in my budge...

Read this review »


Low price but lacking in important features

Low price but lacking in important features

08-07-2009 02:05 AM by jake | 4 comments »

I purchased this saw due to the DeWalt name, reasonable price and past experience with DeWalt power tools. While this tool is powerful enough and seems well built, it lacks features that make it’s performance only average at best. The most frustrating aspect is that it lacks a blower and the wood debris from the cut obscures the sight line/markings that you try to follow. It is surprising as my last jig saw was sold by Walmart under their own private label at the time called Quantum Pro...

Read this review »


Great & Quiet Portable Belt Drive Compressor

Great & Quiet Portable Belt Drive Compressor

07-21-2009 01:55 PM by Cato | 9 comments »

When I discovered that my loud old direct drive unit would not supply enough air to run my new framing nailer I started searching for a portable belt drive replacement with a 4 or higher CFM @ 90 PSI, which is supposed to be adequate for framers. I wanted a belt drive because I knew they were quieter, and I couldn’t stand the noise of my old one. I searched on the web and found this compressor to be highly rated by contractors, and it was supposed to be very quiet with plenty of pow...

Read this review »


Dewalt Protector Smoke Safety Glasses - Got it for $3 but It's now only $2 Grrr.

Dewalt Protector Smoke Safety Glasses - Got it for $3 but It's now only $2 Grrr.

07-04-2009 05:02 PM by EricWrights | 4 comments »

Do they worth a buck at all? Why did I buy them? Adjectives that might best describe this glasses would be Exceptional Quality and Amazing Value. True to their name, DeWalt’s safety glasses set the standard for quality and value. I got them shipped to my home a couple days ago for $3 but now only $2 and they are more comfortable than safety glasses costing 5 times as much. That’s why I want to suggest you guys to grab one if you are needing this kind of thing. The glasses...

Read this review »


Dewalt Radial Arm Saw

Dewalt Radial Arm Saw

06-27-2009 10:13 PM by Doug | 13 comments »

I got this saw from a local news paper ad, I have had a number of craftsman radial arm saws, didn’t really care for them to much, kinda cheap made !, But now mine were newer saws and i know the old ones were real nice. This one was built in 1960-1962. It wasn’t in the best shape in the world so i dissmantled it and restored it, motor bearings,wires,switches,ETC. Avery nice saw, very acurate !

Read this review »


An oldie but a goodie

An oldie but a goodie

06-26-2009 11:09 PM by CutNRun | 21 comments »

I have always liked radial arm saws. My first power tool purchase was a Craftsman radial arm saw. I only had the one saw and I could do most operations with it – ripping, cross-cutting, mitering; all achievable. The Craftsman (long gone) couldn’t hold a candle to the accuracy of this saw. The arm is cast iron that was aged prior to having the ways machined. The motor was a special built unit that has a flat bottom for extra clearance over the cutting surface. I purchased thi...

Read this review »


The DeWalt Stacked Bargain...

The DeWalt Stacked Bargain...

06-13-2009 04:41 PM by knotscott | 5 comments »

This DW7670 is DeWalt’s 8” stacked dado blade set. It features (2) 24 tooth outside cutters, (4) 4 tooth 1/8” chippers, (1) 4T 1/16” chipper, (1) 4T 3/32” chipper, (12) steel shims, and a handy carrying case. The DW7670 expands to a maximum cutting width of 29/32”, and has a nearly infinite number of possible smaller widths by using the various shim and chipper sizes. All the teeth are C-4 micrograin carbide, and the bore diameter will fit 5/8” arbors...

Read this review »


I can't believe its not butter

I can't believe its not butter

05-28-2009 08:05 AM by Webb | 6 comments »

From what I can see, the mechanics of this jigsaw appear identical to the corded version (the DW331K). Wow – this saw really surprised me. I wound up doing a lot of carpentry recently (cabinets in the garage made out of 2×4’s and plywood) and my B&D drill died. For my anniversary, the loml bought me a DeWalt 18v drill/impact driver combination kit which started me looking for a way to score another battery. Since I had a “lowest price I could find” B&D I t...

Read this review »


A Bargain and an All Around Very Good Performer in a 10" TK Blade

A Bargain and an All Around Very Good Performer in a 10" TK Blade

03-27-2009 01:17 PM by knotscott | 11 comments »

This blade is such a nice bargain. For around $35, it comes close to my Infinity, Forrest, and Ridge Carbide blades, and holds its own against my many of my mid level Freud, Tenryu, and CMT blades, some of which cost nearly twice as much. For a 50T blade it feeds surprisingly easily, enabling it to go through thick stock more easily than most similar blades. Crosscuts were very clean, and rip cuts give glue ready edges. It’s very versatile overall, and easy for smaller saws to spin. ...

Read this review »


« prev 1 ... 6 7 8 9 10 11 next »
109 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com