LumberJocks

Reviews: DeWalt

  • Advertise with us
You get what you pay for?....Maybe less

You get what you pay for?....Maybe less

10-25-2009 09:12 PM by Routerisstillmyname | 14 comments »

I purchased these early this year. My decision was based on somewhat good reviews and mostly price. Based on the amount of usage that the dado set would see, I didn’t want to spend 200 on the Freud SD508 set which is what I had in mind in the first place.I also skipped over the Oshlun SDS-0842 set due to noticeable bat ears claims and reviews.So today I had a chance to put this set to test after making a zero clearance insert for this set. Well, I’ll make it short. Clean bottom and no bat ear...

Read this review »


I just don't get it anymore.

I just don't get it anymore.

10-11-2015 01:23 AM by PatrickB | 15 comments »

Update:It was mentioned in a review I wrote about another tool that it took me 20 years before I wrote a review and that as far as he was concerned what I say doesn’t really count. So I thought I would update why it took so long to write my review. I have always been very happy with this tool. It’s done plenty of studs and joists and decks. Cut just great and runs like a champ. My only complaint arose the one time I do not have a table saw and I had to make some precision on a pro...

Read this review »


DEWALT  12 In. 96T Ultra-Smooth Crosscutting Thin Curf Saw Blade

DEWALT 12 In. 96T Ultra-Smooth Crosscutting Thin Curf Saw Blade

01-17-2011 09:06 AM by wseand | 13 comments »

I was looking around for a new blade for my DW718 SCMS and I was wondering around Lowes and spotted this beaut. So I took it home and put it to the test. The first thing I noticed was how quiet it was when cutting through the wood. It leaves an incredibly smooth and clean cut. It cut perfect miters on hard maple in the first pass. It says it cuts nonferrous metals so I cut some copper tubing and it made a nice smooth cut leaving little tear out but you better wear eye protection. Then ...

Read this review »


10 years and still going

10 years and still going

10-25-2014 03:06 PM by Canadianteacher | 12 comments »

I am a shop teacher at a middle school in Abbotsford BC. We purchased 8 of these Dewalt scroll saws 10 years ago and have have only had to replace 1 of them (the motor went after 9 years). One more saw is making some funny sounds in its upper arm and will most likely be done soon (I will take the motor and place it in my other saw). The saws get used by grade 6-8 students cutting from 3/4” alder to 1 and 3/4” basswood. I must say that my students are not easy on the saws and I hav...

Read this review »


Bought one this evening!

Bought one this evening!

04-23-2010 02:06 AM by Knothead62 | 10 comments »

Based on the reviews here on LJ forum and a good review in WOOD magazine, I took the plunge and bought one at Lowe’s this evening. I had saved up some money and have it in the garage, ready to open, read the manual (real men don’t read the manual), build a stand for it and make lots of wood dust or chips, whatever it makes. I’m going to plane some scrap pine to get used to it and make any necessary adjustments . The LOML wants a dining table. I have a stack of pecan that...

Read this review »


Elijah and Lazarus

Elijah and Lazarus

10-25-2010 03:04 AM by sawblade1 | 21 comments »

Good evening LJ’s posting another review of the tools I love The first pics show the two of them together, The second pic shows Lazarus the 18v drill who is the newest addition rescued from the trash bin and the third pic shows Elijah the cordless 12v drill who has served me for over 14 years this November:) You just can’t kill these things This past Monday I found the 18v drill in a trash bin no batteries or charger with a locked up gear box after carefully disassembling the dri...

Read this review »


Shelix Replacement Head Too Small in Diameter

Shelix Replacement Head Too Small in Diameter

12-12-2015 07:54 PM by greatview | 14 comments »

I replaced the stock head in my DW735 with a new Shelix spiral head. It seem as if the Shelix diameter is slightly less that that of the stock head. I had to remove the blades in order to pull the old head out as they were a larger diameter than that of bearing and I couldn’t remove it intact. The Shelix head goes through the bearing seat thus is smaller that the diameter of the stock head. Clearly the entry side is closer than before. In other words, I have to crank down the u...

Read this review »


Great saw for a big box store

Great saw for a big box store

12-11-2008 09:39 PM by DannyBoy | 9 comments »

I know, we all give the big box stores crap for having shoddy this, that, and the other. But let’s face it, we nearly all shop there. Lowes has always been a good place and I continue to love buying from there. I was lucky enough to get offered a bit of a shopping spree from my father for my birthday (a bit belated) and Lowes was just down the street. For the past 6 months I had been cursing myself for spending $30 on a crappy Black your Decker saw that was mostly plastic. I boug...

Read this review »


Excellent planer, but get the extended tables

Excellent planer, but get the extended tables

08-05-2010 04:37 PM by Vrtigo1 | 15 comments »

This is my first planer, so I don’t have anything to compare it to, but it works great. All of the controls are easy to use, two speeds (different # of CPI for dimensioning or finishing). I like the fact that the cutter head is connected to the base with 4 risers instead of two like the DW734 and DW733 as well as the Ridgid and Ryobi planers they carry at Lowes and Home Depot. The depth adjustment is extremely easy to use and once I set it, it hasn’t moved once. The top is e...

Read this review »


Fully Automatic Weapon

Fully Automatic Weapon

11-03-2008 07:26 PM by OutPutter | 10 comments »

So, this guy comes to the office to help one of the girls get into a cabinet that had a lost key. I heard all kinds of racket going on over there and thought I better sniff around. It’s a good thing I did because look what I saw. This is a drill with a 36 Volt Battery, two lights with 12 LEDs each, and a shoulder strap. The shoulder strap wasn’t just to help handle the weight, which I estimate at 5lbs, it was also to help with the torque. When you pull the trigger on this thi...

Read this review »


« prev 1 ... 5 6 7 8 9 10 11 next »
110 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com