LumberJocks

Reviews: DeWalt

  • Advertise with us
Dewalt DCD970KL review

Dewalt DCD970KL review

02-14-2011 05:00 PM by phtools | 5 comments »

I bought this drill to replace my Dewalt DC925, which fell off a roof and landed in a big nasty mud hole, I just figured the drill was toast and ordered a new one, saved the 925 for salvageable parts. The DCD950 and the DCD970 are the EXACT same drill except the clutch ring, which is black on the 950 and silver on the 970. The difference is the batteries that are included 950 has the XRPs and 970 has the new NANO’s(lithium-ion). OK, back to the comparison Pros of the DCD970/950 VS. the ...

Read this review »


Very NICE !!!

Very NICE !!!

04-19-2010 11:41 PM by medicnurse70 | 16 comments »

I purchased the Dewalt 734 today from Lowes for $399.00. I have been looking at both the Ridgid 13” and this Dewalt. I have it fiqured out that these are pretty much equal products. Why did I choose Dewalt ? Simply because I was worried about the ability to find replacement knives for the Ridgid. I also like the manual lock on the Dewalt and I am also a little po’d with Home Depot because they would not honor their on- line price in the store which was 369.00 vs. 399.00. (Wi...

Read this review »


Great Router and a steal for the price

Great Router and a steal for the price

01-31-2008 11:53 PM by teenagewoodworker | 18 comments »

this router is amazing! it is my first router and i am thoroughly pleased. i purchased this router combo kit for 200 dollars at Lowe’s. most of the other combo kits that i saw anywhere else for around 200 dollars were only 1 1/4 hp but this has a great 2 1/4 hp and it cuts through any woods that at thrown at it with ease. it proved to be an especially helpful tool when recently i used a straight edge guide with this router to joint an 8 ft piece of mahogany so i could reference of of th...

Read this review »


Dewalt homerun

Dewalt homerun

08-28-2012 08:42 PM by Oldelm | 7 comments »

I purchased this router because I needed something lighter than my 691 plunge base in order to keep being able to do some woodworking. I bought the router andmost of the accessories for it, the fence(the inexpensive one), the round base to use with bushings, the vacuum adaptors for both bases. I used it for the first time to let in some banding and do some round over work on my current project. I am impressed with the the tool. It is easy to handle with either base. The plunge base is easy to...

Read this review »


DeWalt 5 inch Random Orbital Sander

DeWalt 5 inch Random Orbital Sander

09-06-2012 02:04 PM by Purrmaster | 15 comments »

I’ve had this tool for several years now. I’ve tried to take good care of it and it has taken good care of me. The particular model number is DW26451. Single speed random orbital sander. It takes 5 inch hook and loop (velcro) discs. You can see it here: http://www.dewalt.com/tools/woodworking-sanders-random-orbital-sanders-d26451.aspx. I cribbed the image from their website as well. I’ve been very pleased with it. The thing just works. It’s been completely...

Read this review »


Huge Table and Easy Blade Changes

Huge Table and Easy Blade Changes

11-09-2011 06:00 PM by Kelen | 5 comments »

As a disclaimer, I am far from being a seasoned and proficient user of a scroll saw. I’ve cut out a few things in my day but have not embarked on any detailed fret work or intarsia design work. A majority of my projects have centered on simple wooden cutouts of letters, patterns, and a few animal puzzles. I view my scroll saw as more of a complement to my workshop and one of those tools that are fun to play with when I have some time. I have to be in the scrolling mindset though else I qu...

Read this review »


You get what you pay for?....Maybe less

You get what you pay for?....Maybe less

10-25-2009 09:12 PM by Routerisstillmyname | 14 comments »

I purchased these early this year. My decision was based on somewhat good reviews and mostly price. Based on the amount of usage that the dado set would see, I didn’t want to spend 200 on the Freud SD508 set which is what I had in mind in the first place.I also skipped over the Oshlun SDS-0842 set due to noticeable bat ears claims and reviews.So today I had a chance to put this set to test after making a zero clearance insert for this set. Well, I’ll make it short. Clean bottom and no bat ear...

Read this review »


Dewalt Edge Guide is a Smooth Slider

Dewalt Edge Guide is a Smooth Slider

11-28-2012 05:51 AM by pintodeluxe | 5 comments »

This is a nice edgeguide that will expand the capabilities of your router. The fence is split, so you can slide it open for edge cuts, or keep it closed for inboard cuts. The guide locks down securely, and makes accurate cuts. It comes with everything you need, including knobs with springs to mount the guide to your router. The DW 618 uses the thicker rods, but it comes with some thinner rods for other Dewalt routers. This guide is helpful for cutting strip inlays, fluted columns, d...

Read this review »


DEWALT  12 In. 96T Ultra-Smooth Crosscutting Thin Curf Saw Blade

DEWALT 12 In. 96T Ultra-Smooth Crosscutting Thin Curf Saw Blade

01-17-2011 09:06 AM by wseand | 13 comments »

I was looking around for a new blade for my DW718 SCMS and I was wondering around Lowes and spotted this beaut. So I took it home and put it to the test. The first thing I noticed was how quiet it was when cutting through the wood. It leaves an incredibly smooth and clean cut. It cut perfect miters on hard maple in the first pass. It says it cuts nonferrous metals so I cut some copper tubing and it made a nice smooth cut leaving little tear out but you better wear eye protection. Then ...

Read this review »


A really nice drill driver set!

A really nice drill driver set!

02-03-2014 03:22 AM by Mainiac Matt | 13 comments »

Though my 15 year old 12 volt Porter Cable cordless drill is still alive and kicking (on a rebuilt battery pack) I really wanted an impact driver. After doing my research and having opportunity to try several different models at work, I was all set to pull the trigger on the white series Makita18 v LI drill driver set. When a good special was going on at HD just before Christmas, I went down to buy the set, but then stumbled across another great price on the DeWalt 20 vmax set. The specs...

Read this review »


« prev 1 ... 4 5 6 7 8 9 10 11 next »
104 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com