LumberJocks

Reviews: DeWalt

  • Advertise with us
DeWalt 13" two speed planer

DeWalt 13" two speed planer

03-01-2008 12:26 AM by jeffthewoodwacker | 19 comments »

Recently purchased the DeWalt model 735 13 inch two speed planer and stand. Right out of the box the planer had very few parts to assemble. The instructions were very easy to understand. I had to make a few minor adjustments in the height adjustment scale, but the preset stops were right on the money. Gave the planer a real test with some cedar boards that were up to 10 inches in width and the machine did great. I planed them down close to 3/4 inch thick and then switched to the slower ...

Read this review »


So much more than a "laminate trimmer on steriods".

So much more than a "laminate trimmer on steriods".

04-23-2011 07:55 PM by Gord Graff | 31 comments »

Hi All. If you’re in the market for a compact router kit that’s loaded with features, you owe it to yourself to check out DeWalt's new DWP611PK. This compact router kit easily exceeded my expectations for a compact router kit of this size and price range, read on and find out why. The Motor: The 7amp, 1 1/4HP soft-start variable speed motor delivers plenty of power for a myriad of routing tasks and the full-time electronic feedback maintains motor speed throughout ever...

Read this review »


The DeWalt Stacked Bargain...

The DeWalt Stacked Bargain...

06-13-2009 04:41 PM by knotscott | 5 comments »

This DW7670 is DeWalt’s 8” stacked dado blade set. It features (2) 24 tooth outside cutters, (4) 4 tooth 1/8” chippers, (1) 4T 1/16” chipper, (1) 4T 3/32” chipper, (12) steel shims, and a handy carrying case. The DW7670 expands to a maximum cutting width of 29/32”, and has a nearly infinite number of possible smaller widths by using the various shim and chipper sizes. All the teeth are C-4 micrograin carbide, and the bore diameter will fit 5/8” arbors...

Read this review »


Gets the job done!

Gets the job done!

12-09-2009 11:49 PM by ChunkyC | 16 comments »

Where Purchased: LowesPurchase Price: $149.00 Let me start off by saying that this is the first biscuit joiner that I’ve owned so I can’t compare it to other models but I will give you my honest take on the model. Specs:It has selectable depth settings for #0, #10, #20 and “M”. The M setting is for future use, what ever that means but at the M setting, you get the full depth of cut. The height is very easy to set by loosening a thumb screw and turning a knob ...

Read this review »


DeWalt Dust Extracting Vacuum.....As good as Festool?

DeWalt Dust Extracting Vacuum.....As good as Festool?

12-20-2012 04:04 PM by Cory | 37 comments »

I bought this vacuum for $220 from Amazon a week or so ago to replace a 6 year old Craftsman shop vac. I was drawn to this one because of the auto-on switch and the suction adjustment feature. Those are two items I had been wanting after demoing a Fein and Festool vac. At about half the price of those vacuums, this one performs equally well. There are a few minor negatives, but my experience has been overwhelmingly positive. Positives:-Excellent suction-variable speed/suction power is ...

Read this review »


Dewalt DW735 and DW7350 planer stand

Dewalt DW735 and DW7350 planer stand

09-16-2010 08:51 AM by pintodeluxe | 9 comments »

I have been very pleased with the 735 planer and 7350 planer stand with mobile base. The base rolls around effortlessly, yet locks down solidly with the push of a foot pedal. The planer works very well. I like to remove only about 1/32” per pass to limit wear on the machine. I have never had feed roller problems like some competitor brands, and the chip ejection fan (along with a Jet DC650 dust collector) leaves no chips on the floor and no dust in the air! Blade changes and adjust...

Read this review »


Good performance but I wouldn't buy it again

Good performance but I wouldn't buy it again

09-25-2014 02:21 PM by JSB | 27 comments »

The planer itself performs very well. It has a heck of a chip ejection system that will allow you to pipe this into a filter bag without the need for a dust collector. I’ve never had an issue with the amount of power it has even at full 13” wide passes. Snipe is horrible out of the box but the way I have my auxiliary bed setup it reduces it significantly. Lots of upgrades and options available on the internet. The reason I wouldn’t buy it again is that it’s a money ...

Read this review »


Router Dust Collection That Works!

Router Dust Collection That Works!

06-01-2011 05:48 PM by TheDane | 12 comments »

When I bought my DeWalt DWP611PK router (which I love), I didn’t order any of the accessories for it. But, after such positive experiences with the router itself, I decided to give the accessories a shot as well. DeWalt offers four accessories for the DWP611PK … edge guides for both the fixed base and plunge base, as well as dust collection adapters for both. I haven’t had enough opportunity to use the edge guides (DNP618 for the fixed base, DW6913 for the plunge ba...

Read this review »


Outstanding countersink/bit combination

Outstanding countersink/bit combination

02-19-2013 03:32 AM by Rick M. | 12 comments »

Over the years I’ve tried a number of countersink + drill bit brands, most use a replaceable bit but they are all pretty mediocre and few lasted a year. I’ve owned this Dewalt set for several years and they still perform like the first day I brought them home. Some folks believe combination bits are gimmicky, preferring to use separate products but these might change their mind. Not only do the countersinks perform flawlessly, the tapered bits are exceptional and probably the best...

Read this review »


New Table saw for my shop

New Table saw for my shop

11-05-2012 12:28 AM by jerrells | 22 comments »

Well I finally burn out my old cheap table saw. I guess cutting some hard oak limbs was too much for it. I shopped around for something that I thought woul;d fit my needs for years to come. I decided on the Dewalt 745. It is going to be a Christmas present from my wife, my daughter and son-in-law and some money i pitched in. I was going to wait till black Friday to see if there was a better price. I normally show at Lowes and they had it for $369 which seemed to be the going price. I just hap...

Read this review »


« prev 1 2 3 4 5 ... 12 next »
115 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com