LumberJocks

Reviews: Lie-Nielsen

  • Advertise with us
A little disappointed with Lie-Nielson an update

A little disappointed with Lie-Nielson an update

12-13-2011 08:19 PM by Indiana_Parrothead | 18 comments »

I did receive the chisels in January and have been using them now for about a year and could not be more happy with them. When I got them they were very sharp right out of the box, but I lapped the backs and sharpened them anyway. The backs were very flat and it did not take many passes over the stones to have a mirror finish on them. The two larger chisels both had a small nick on the bevel the same distance from the edge. It took a little honing to get them out as these are very hard steel....

Read this review »


Awesome saw

Awesome saw

12-08-2011 05:35 PM by funchuck | 7 comments »

When I first got this saw, my first impression was just how beautiful it was. It just looks so good! It’s also very big, but also well balanced. The handle is very comfortable and it cuts very well. I was worried about the thin saw plate, but after using it, I think it is a big advantage because it seems to cut much easier. I also have 2 Veritas saws (the dovetail and x-cut carcass), a Pax saw (the rip panel saw) and a japanese pull saw from the home center (which is actually pre...

Read this review »


Lie-Nielsen Rabbet Block Plane (with Nickers) - Awesome

Lie-Nielsen Rabbet Block Plane (with Nickers) - Awesome

10-29-2011 05:27 AM by semmons23 | 5 comments »

I’ve posted a review of this hand plane on my blog – check it out if you’re interested. http://www.thedustydeveloper.com/2011/09/lie-nielsen-rabbet-block-plane-60-12-r.html

Read this review »


Another manly man video

Another manly man video

10-13-2011 11:28 PM by WayneC | 4 comments »

In this video, Rob covers taking a piece of rough lumber to finished state. The topic covered is similar to Chris Schwarz’s Course, Medium and Fine. One key item that distinguishes this video is Rob’s use of the scrub plane. This is one of the few videos I have seen where this plane is used fairly extensively. Most other folks I have seen use a jack plane for this work…. He spent to me what was an amazing amout of time getting one face flat enough to work. He used ...

Read this review »


This is a must have DVD for every wookworker..It's not just for furniture designers

This is a must have DVD for every wookworker..It's not just for furniture designers

09-30-2011 11:16 PM by Angela | 4 comments »

I’m about finished making my TV stand. During the construction of the top, I thought there must be some formula to determine the overhang of the top. When I asked this question on LJ, I received a variety of answers but nothing with a formula. Since asking this question and designing my TV stand I came across a DVD produced by Lie-Nielsen called Unlocking the Secrets of Traditional Design. It discusses the proportions of furniture and how to determine the proportions of a piece of furnitur...

Read this review »


Is it worth $500?

Is it worth $500?

08-23-2011 07:03 PM by Jorge G. | 14 comments »

It all depends. Here is my philosophy for buying tools, if I say to myself “Gee it would be nice to have XXXXX tool so I could make this operation easier” 3 times, then I buy the tool. I do it this way because I know that I will be using the tool, and it makes my woodworking easier. Shooting a board is one of those operations that seem simple enough, just make a shooting board and shave the end grain with a plane. THe problems comes with the execution. At least for me. I tried ...

Read this review »


Nice scraper but difficult sweet spot

Nice scraper but difficult sweet spot

01-02-2011 06:17 PM by Chelios | 16 comments »

I got this scraper plane to see if I could get better results during surface prep for finishing. It cost $235 from the Lie Nielsen web page. The finish on the plane is flawless. It is a beauty and coming out of the box it created a lot of anticipation on what it was going to do for me. It has a very nice heft to it and a great blade. I honed the blade sharp like I do for all my planes and I started working with it. Right away I realized that this scraper was not going to be easy to ma...

Read this review »


A must have for my shop

A must have for my shop

10-17-2010 05:14 AM by Chris | 7 comments »

This was a birthday present this year; I have only just been able to get some shop time with it. I am in the middle of a bookcase build and found this to be invaluable removing the whisper thin bit of wood needed to make the shelves fit just right or to clean up the home made moldings to complete the top of the case. Ease of Use:If you have used other planes you will find this plane to be straight forward and intuitive. Adjustments: The mouth is adjusted by loosening the locking screw...

Read this review »


Fundamentals of Inlay DVDs

Fundamentals of Inlay DVDs

08-23-2010 11:01 PM by RogerBean | 8 comments »

I’ve had the recent opportunity to spend some serious time with Steve Latta’s three DVD set produced by Lie Nielsen. Many of us are inspired by the great inlay work of traditional furniture, but find it intimidating to begin cutting little grooves and the like into our newly created masterpiece. So we often pull up short, and fail to finish the piece with the inlays it calls for. Or, we can try the trial and error method at our peril. Neither is necessary any longer. These videos show yo...

Read this review »


Any sweeter and I woulda had to go to the dentist..

Any sweeter and I woulda had to go to the dentist..

06-16-2010 09:53 AM by ars | 10 comments »

For the past several months I’ve been on somewhat of a handtool kick, with a focus on DTs. Like most people I started with a Japanese pull saw, because it was cheaper. I just couldn’t get comfortable with the straight handle and also don’t like cutting on the pull stroke, bottom line was I wanted a western saw. Anyways I went to my local Woodcraft to pick up a couple unrelated items and I asked one of the employee’s if they could order me one of those new $80 Ver...

Read this review »


« prev 1 2 3 4 5 next »
46 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com