LumberJocks

Reviews: Ryobi

  • Advertise with us
Ryobi BG828G 8" Bench Grinder

Ryobi BG828G 8" Bench Grinder

12-08-2014 12:17 AM by Homunculus | 0 comments »

As with all Ryobi products, you pretty much have to start the review with “good tool, for the money.” 3 amp motor which was plenty strong for sharpening chisels, lathe tools etc. No slowdown whatsoever, which I was worried about since I’m used to using my dad’s 6 amp Delta grinder. That said, long windup, takes maybe 30 seconds to get to full speed? Slower than a 6 amp, but that’s about all I noticed when it comes to the less powerful motor. That said, if you ...

Read this review »


Ryobi 18-Volt One+ Lithium-Ion- Drill Driver and Circular Saw Kit +charger

Ryobi 18-Volt One+ Lithium-Ion- Drill Driver and Circular Saw Kit +charger

08-14-2014 12:54 AM by Routerisstillmyname | 19 comments »

Since home depot doesn’t like publishing a negative reviews that points out the obvious, I might as well review it here.So what we have here is a definite value. Drill with clutch, 5 1/2 inch saw not one but two entry level +1 lithium ion 18v batteries and a charger and all for just 79.00You can’t beat that.Batteries (although entry level) and charger alone cost more than that individually. The drill is nice with 24 position clutch setting and runs true no wobble like the yellow D drills.An...

Read this review »


Best used Tool I ever purchased

Best used Tool I ever purchased

03-14-2014 10:43 PM by steve | 12 comments »

I got this Ryobi 1300 Planer 3 years ago…I took a shot at it for $100 used, but actually almost new…the owner passed away just after buying it, and his wife sold it to me, I would have given her more, but that’s all she wanted. I have the box, receipt, EVERYTHING!I’ve had a Delta, and and an ole General…I gotta give this Ryobi the props though…and it is the ONLY Ryobi tool I own…I am not a big fan, but this older 1300 is a great design. The lock is...

Read this review »


Probably the best $40 I've spent on a tool

Probably the best $40 I've spent on a tool

08-19-2013 07:47 PM by Jofa | 22 comments »

Hey fellow LJ’s, I found myself in need of a new jigsaw as the old Skil I had been using was just impossible to dial in to make a perfect 90º cut. No matter what I tried, I there would always be an angle on the inside of the cut piece and the metal blade guide started to rust, marking up my stock. I did a little research on some low priced saws (I go low price with pretty much everything) and ended up with the Ryobi JS481L 4.8 amp VS jigsaw. Overall:Very powerful, excellent cu...

Read this review »


A pleasant surprise from the Home Depot

A pleasant surprise from the Home Depot

06-16-2013 08:10 AM by Chris Hudak | 7 comments »

It all started when my father in law gave his Craftsman radial arm saw. I am am his favorite son in law after all (my wife is an only child.) Well I soon found out that life is too short to mess with with a Craftsman radial arm saw. When I finally got the thing aligned and running the blade would slow down and jam in the wood and it would be out of alignment all over again. Not wishing to inflict this pain on another human being I took the dang thing to the dump. The man working there seemed...

Read this review »


Easy to use and does what it's supposed to do.

Easy to use and does what it's supposed to do.

05-20-2013 08:24 PM by Bill1974 | 5 comments »

I have had this biscuit joiner the (JM82) for a few months and it has worked well. It’s easy to adjust and handle. It seem a little more powerful than a porta cable one that I had used, it get up to full speed quicker than the PC. The case is nice, but the bag location is a little awkward. It would also be nice if there were a better way to store extra biscuits in it. Additionally the cord gets bent pretty tight when put in the case, just past the strain relief on the unit, I cu...

Read this review »


No Batteries Required

No Batteries Required

03-24-2013 01:58 AM by cutworm | 10 comments »

If you have power handy in your shop this little drill is great. The clutch has 24 settings for driving screws and it has good torque for driving at slow speeds. I have power right at my bench so it works great for me. About the only thing it lacks is a high-low speed switch. I paid $20 for a reconditioned one and will be using it most of the time instead of my battery drill. Best of all – No more dead batteries in the middle of a project.

Read this review »


THREE (3) packs of Ryobi 5 in. Plain-End Scroll Saw Blades Assortment

THREE (3) packs of Ryobi 5 in. Plain-End Scroll Saw Blades Assortment

03-02-2013 05:54 AM by mikethetermite | 3 comments »

This was the first time I tried some of these they worked quite well. Got them all for for $.99. 108 for $.99, not a bad deal at all. http://www.ebay.com/itm/Ryobi-5-in-Plain-End-Scroll-Saw-Blades-Assortment-/290867787346?pt=LH_DefaultDomain_0&hash=item43b9123652 This E-Bay auction was for THREE (3) packs of Ryobi 5 in. Plain-End Scroll Saw Blades Assortment (each is 36-Pack) Model # A28SC12. 12 blades each with 11.5, 12.5 and 41 teeth per inch.

Read this review »


Great Tool and Even Better Customer Service From Home Depot

Great Tool and Even Better Customer Service From Home Depot

12-05-2012 11:50 PM by NormG | 10 comments »

Wife purchased an additional smoke detector and Carbon Monoxide Detector today, which required me to get out the drill. I received this as a gift last year after my prior drill of 10 years died. I really do not need much more than this as I really do not have a need. So it meets my needs. It is comfortable to hold and use, the battery life is very good, as is the ability to perform as a drill and driver and general uses as a flap sander, wire wheel distress-er etc . I use it in the sho...

Read this review »


Excellent Belt Sander for Moderate Use

Excellent Belt Sander for Moderate Use

09-14-2012 02:48 PM by HAJIII | 13 comments »

I debated for quite a while before purchasing this sander because of the reviews complaining of drive belt problems, power cord issues, and difficulties in sanding belt alignment. I have had the sander for six months and had none of these problems. I even bought spare drive belts just in case, but I have had no problems with the drive belt. I was concerned with the sanding belt alignment problems mentioned but I found the adjustment quick and reliable. I can switch from one sanding grit to ...

Read this review »


1 2 3 4 5 next »
44 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase