LumberJocks

Reviews: Grizzly

  • Advertise with us
Grizzly G0656 8" jointer a good buy.

Grizzly G0656 8" jointer a good buy.

11-11-2009 09:56 PM by mart | 10 comments »

Late last winter i had a friend who flew down from here in Alaska to the lower 48 to pick up a truck he had purchased. He was driving it back up and was going through Washington so I had him stop by the Grizzly Warehouse to pick up a few things for me. One was the Grizzly G0656 8”x72” jointer with mobile base that they had for $795. When my buddy arrived we backed his truck into the shop and using some pipes and a rope tackled slid the box containing the jointer table (the heav...

Read this review »


Another GRIZZLY

Another GRIZZLY

11-10-2009 02:26 AM by khop | 5 comments »

OK I couldn’t help myself. When I ordered the G1071 OSS sander, I went ahead and got this one too. Might as well round out the total order to a grand right? I had always wanted to get a larger beefyer belt and disc sander. I still have the old Delta 6×36 which will be used for pencil sharpening. lol. Now on to the pros and cons. Pros, IT”S A GRIZZLY, Heavy and very stable, strong and definately an upgrade from the Delta. It has good dust collection. Cast iron disc and tilt...

Read this review »


Another Great Grizzly Product

Another Great Grizzly Product

11-10-2009 01:54 AM by khop | 11 comments »

I finally ordered the new OSS from Grizzly. As pictured, it was very heavy and once again, my electric hoist came to the rescue. At around 300 pounds, it is built like a tank. The unit came well packaged with thick styrofoam around all the pieces. There was ample amounts of the famous goo on most of the exposed metal parts. A little mineral spirits and a cloth rag cut through it qiuckly. I was fortunate to have the hoist to lift the top into position as well as lift the whole unit onto the mo...

Read this review »


Cheap, but Workable

Cheap, but Workable

10-12-2009 08:54 AM by Jimi_C | 14 comments »

At $22.95, this plane is dirt cheap, and as such I was fully expecting to have to do some work on it in order to get it into usable condition. The only other plane I have is a Stanley SB4, which is apparently a British version of the #4 (weird that I got it at Lowes a couple of years ago). That plane is shown in the second picture I attached to the review, and it should be evident what the major issue with that plane is – the two screws that control depth of cut. Rather than having a...

Read this review »


Grizzly G9849 Magnetic Base/Dial Indicator Combo

Grizzly G9849 Magnetic Base/Dial Indicator Combo

10-04-2009 04:58 AM by ChunkyC | 10 comments »

I purchased one of these to fine tune my tools, mostly my table saw and miter saw. Pros:Cost. This costs less than $22 from Amazon. Comes with a plastic storage case. (TIP: Remember how it’s packed BEFORE you remove it for the first time. It’s a bear getting the lid to close if you miss this) There are two arms that you can adjust to get the dial indicator into about any position. A very strong magnet with an on off switch. Cons:There are two arms that you can adj...

Read this review »


Great TS Upgrade For A Very Reasonable Price

Great TS Upgrade For A Very Reasonable Price

09-30-2009 02:18 AM by dfarr | 13 comments »

I’ve always struggled with the cheap blade adjustment cranks (pictured right) on my 70s vintage table saw. I found these cast iron handwheels (H3189 – Cast Iron Handwheel – 6”) and chromed handles (H3205 – 4” x 3/8”-16) on the Grizzly web site. The handwheels were only $8.50 and the handles were $2.95. This was a great deal compared to other places I’ve looked at similar handwheels. The wheels come with a small center hole that I had to bore ou...

Read this review »


Shelix cutterhead for jointer

Shelix cutterhead for jointer

09-25-2009 09:58 AM by Jim | 9 comments »

I’ve had my Grizzly 8” G0490 jointer for about 5 years. I’ve been very happy with this jointer. I wouldn’t hesitate to buy this same jointer again. About 2 yrs ago I decided to modify it by replacing the cutterhead with a Shelix head. I was working with some highly figured koa and wanted to maximize the utilization of this expensive wood as much as possible by not losing any to tearout. Many people want to know if the helical heads are worth the money. Short answer...

Read this review »


Fantastic bit set, especially for the price!

Fantastic bit set, especially for the price!

09-16-2009 05:33 PM by dbhost | 16 comments »

After needing sizes that just weren’t in my Porter Cable 8 piece set, and finding out what it would cost to buy bits individually, I decided, being the cheapskate that I am, to look for a set. The big box of crayons as it were. Now I have been looking pretty seriously into the MLCS 31 piece Master Forstner Bit Set (and they ARE coming down in price) but at the list price I had first seen them at of $129.00, I was open to options. I ran accross the Fine Woodworking article that raved ...

Read this review »


Grizzly G1023SL TS Overall First Impression

Grizzly G1023SL TS Overall First Impression

09-14-2009 06:34 AM by Kevin | 29 comments »

I received my new TS this past Thursday. The freight guy was kind enough to go ahead and put it in my garage for me :) That was excellent I thought and was not expecting that at all. This review will just be a first impression on how it was shipped and how easy/difficult it was to assemble the machine. 01. SHIPPING – 5/5 The shipping was great. No holes or damage at all on any of the boxes. It came with two boxes. One for the fence and other for machine. The cabinet came o...

Read this review »


I've got a problem with this saw

I've got a problem with this saw

08-09-2009 02:37 PM by 45acpbuilder | 19 comments »

It’s so darn quiet I’m afraid I’ll walk off and leave it running! I added a little flag to the tensioner so I won’t turn it on with the blade loose. Seems someone, Grizzly themselves maybe, could add this to their saws with out any problem. It’s just a bead chain tied to the tension lever and a 1/4” bolt tapped into the arm behind the switch so the tension lever lifts the flag so it blocks the start switch. The saw blade squealed when resawing so I ran ...

Read this review »


« prev 1 ... 14 15 16 17 18 19 20 21 next »
208 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com