LumberJocks

Reviews: Grizzly

  • Advertise with us
Review of Grizzly 12" Jointer G609X With Sprial Cutter Head (Grizzly)

Review of Grizzly 12" Jointer G609X With Sprial Cutter Head (Grizzly)

04-08-2010 03:28 PM by Hollis | 9 comments »

The big machine was unloaded with a fork lift using straps under the beds. Grease was present mainly on the beds and fence and was removed with a single edge razor blade and WD-40. It was moved to position using ½” water pipe and two people. I have since built a rollerbase which is pictured; and also added a Wixley digital planer height gauge to it which is also pictured. Out of the box it required a little tweaking of the tables. The outfeed was a few thousandths out of level with the c...

Read this review »


This joint was jumpin...in the UPS truck!

This joint was jumpin...in the UPS truck!

04-08-2010 03:08 PM by MoreWoodPlease | 13 comments »

Grizzly 6” Jointer G0452. Cons: As you can see in the photo, arrived damaged. The base is what was in that box, and the main damage was to the rear cover, (dented and scratched). In the main box with the head in it, the fence support was not packed well, and rolled around in the box, dinging everything, including minor scratches to the tabletop. In the base box, nothing was packed well, and everything else was dinged. The picture of the head is showing the caked axle grease that ge...

Read this review »


Accurate and Powerful

Accurate and Powerful

04-08-2010 08:18 AM by mcase | 7 comments »

I had this machine shipped from Grizzly several months ago. The shipping was timely arriving in just three business days! The machine was everything I hoped for. The tables were dead flat. They adjusted to absolute coplanar. And the machine was very powerful. I had an 1×8” hard maple board set aside just to test this machine and it trued it lickety split. I’ve been using it for months now and am very happy with this purchase. It trues up stock square and smoot...

Read this review »


Outstanding Jointer

Outstanding Jointer

03-16-2010 01:52 AM by Troy | 16 comments »

Got this last week. Arrived in perfect condition, the base in its own box and the upper part in a birch plywood crate. No issues at all with assembly. Used the recommended plug and fired it up. Had to call to find out what the belt deflection was supposed to be cause the manual was a bit older.This thing is a beast. My first use of the machine resulted in a rather pleasant result. I face jointed/planed a 8” wide board of ash which was not flat at all. I fed it through the helical cutter...

Read this review »


Air Filter

Air Filter

02-14-2010 06:23 PM by David Murray | 7 comments »

I finally took the plunge and bought an air filter unit for my shop. It was a purchase that I didn’t put on a very high priority. My thinking was “It really isn’t really a tool”, after all you can’t cut, shape, grind, drill or sand with it. After all I have a dust collector what more do I need. I always figured the fine dust that was always collecting on everything was okay, after this is a woodworking shop. Then I read a few articles on the long term health haza...

Read this review »


Wow what a saw!

Wow what a saw!

02-09-2010 12:29 AM by Bert304 | 31 comments »

This was my first purchase from Grizzly Industrial. So far I have no complaints. I ordered the bandsaw on Friday and picked it up at the terminal this morning. The box only had to small damages to the cardboard, only on the outer layer of cardboard. I opened the box and everything was packed very nicely and tightly in styrofoam. I had to tilt the box on its edge to get the bandsaw out, I could not lift it out. I unpacked everything and inspected all the parts and the bolts and nuts. Al...

Read this review »


Good for short term use. Lousy materials.

Good for short term use. Lousy materials.

01-30-2010 05:42 AM by dbhost | 10 comments »

My Grizzly H7827 Drill Press Table is a little over a year old now, and it is useless. Well not exactly…There ARE some useful parts on it, knobs, thread inserts, T track and suck, but the main material, the melamine coated, well I guess it is supposed to be MDF, but this stuff seems more like compressed cardboard than MDF… The thread inserts that hold it down to the cast iron DP table simply fall out of the pressboard given any longish term exposure to humid environments, like,...

Read this review »


Good product, but need beter quality controls

Good product, but need beter quality controls

01-15-2010 11:14 PM by longhornboyd45 | 17 comments »

In my quest to become a better woodworker, i decided it was time to purchase some tools to upgrade my shop (aka Garage). With a few projects under my belt, i decided to quit paying the local Big Box astronomical prices for their s4s lumber and go and get myself a jointer and planer. After browsing numerous sites and reading reviews i opted for the Grizzly GO452 and GO505 would fit my needs as a beginner woodworker. This review will be only of the G0452 jointer as i have yet to put the plan...

Read this review »


Planer - Economic in cost, Industrial in performance

Planer - Economic in cost, Industrial in performance

01-08-2010 05:17 AM by Troy | 10 comments »

I got this planer a few months ago mainly cause I really needed to upgrade from a bench top model I had (Dewalt). My shop has a 100 amp service subpanel and I left room for it at the first drop for my DC.It came in a decent crate, which had minor damage, but prevented any issues on the machine. The control panel outer cover had a ding for some reason, but it gave it character, so I don’t mind.There was a ton of packing grease on every single moving part. While reassuring that the parts ...

Read this review »


Great Lathe for the money

Great Lathe for the money

01-02-2010 09:13 PM by richgreer | 12 comments »

A review of the Grizzly G0462 lathe was provided to this website about 10 months ago. I am sure that the author provided an honest assessment of his experiences with this lathe. However, my experiences have been different and I am providing a review based on my experiences with the same lathe. If you simply review the specifications and features, I think anyone would agree that this is a lot of lathe for the money. I paid $475 for this lathe and, at the time, Grizzly was offering fr...

Read this review »


« prev 1 ... 12 13 14 15 16 17 18 ... 21 next »
207 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com