LumberJocks

Reviews: Grizzly

  • Advertise with us
Global warming won't stop these Polar Bears.

Global warming won't stop these Polar Bears.

1355 days ago by Szczuldo | 16 comments »

So I got this saw some weeks ago and it spent a week sitting assembled before I finally got the 220V circuit wired in the garage. I came from a cheap aluminium top table saw, the table was extremely small and fence extremely lacking. I may have had the blade miraculously adjusted to within 0.001” but that only helped my crosscuts. I even designed table extensions so that I can attach a real fence to it, but after many hours in solidworks I finally discovered that was not going to work well in...

Read this review »


Pretty Nice Carving Gouges

Pretty Nice Carving Gouges

1369 days ago by Woodwrecker | 4 comments »

I wanted a set of carving gouges , but I couldn’t afford to spend an arm and a leg.I was pretty surprised when these arrived and turned out to be nicer then I thought they would be.Given the price of around $11.00 a gouge, these are nice.They range from 1/4” to 1” and were sharp enough to use right out of the box, but I’ll hone them up real good and give a report a little down the road on how they work out.I gave four stars based on my initial impression, but we’...

Read this review »


Initial impressions of the Grizzly G0572 Hanging Air Filter w/ Remote.

Initial impressions of the Grizzly G0572 Hanging Air Filter w/ Remote.

1413 days ago by dbhost | 10 comments »

For starters, I am not claiming this is an all inclusive review, but rather this is an initial impressions write up for the Grizzly G0572 Hanging Air Filter w/ remote. I have been watching price tags on these machines for quite some time now, and had considered the smaller Jet, Penn State, Delta, even Harbor Freight models, and had been put off by either the price tag, or the features. The G0572 had the CFM I was looking for, and was on sale for a price tag I was willing to spend. For the ...

Read this review »


Bear of a jointer with grizzly sharp teeth!

Bear of a jointer with grizzly sharp teeth!

1437 days ago by mmh | 7 comments »

I am mainly a cane maker so my wood working techniques or needs don’t require the same as that of a cabinet or furniture maker, but since I do use a LOT of very hard woods (Afromosia, Bloodwood, Cocobolo, Ebony, Jatoba, Osage Orange, Macadamia, Macawood, Padauk, Pink Ivory, Rosewood, Ziricote, etc.). I needed a quality jointer and wanted one with the cutting ability to get a nice smooth surface on these woods, especially the figured ones for my cane work and future furniture projects. ...

Read this review »


Grizzly G0572 Hanging airfilter

Grizzly G0572 Hanging airfilter

1450 days ago by njcraftsman | 14 comments »

Okay I’ve had this little gem for about a year, and I must say it has DRASTICALLY improved my shop! This thing has three settings 556, 702 and 1044 CFM. My shop is 500 sqft with 12 foot tall ceiling, and even the lowest setting clears the air quickly, and it you can even set it to auomatically go off in 1,2,4 hours. Has a 5 mic outer filter to catch the large stuff and a 1 mic inner filter(washable). I never realized how much stuff even a great centeral dust collection system leaves be...

Read this review »


Grizzly G0583Z 1HP Canister Dust Collector

Grizzly G0583Z 1HP Canister Dust Collector

1467 days ago by Steven H | 8 comments »

Due to Budget and electricity, I am able to purchase 1 HP dust collector.I choose the canister one. It does a good job sucking dust from my Grizzly G055P bandsaw, but I don’t recommend it connecting to table saw, jointer, etc… The collector come with the elbow, try avoid using it. And for the first time visit the local Rockler store I got some Clear Flexible Dust Collection Hose It was on sale . (Note its says online sale only, its not true) Connected to the the col...

Read this review »


Very happy I got it!!

Very happy I got it!!

1468 days ago by Eagle1 | 16 comments »

Well I finished putting it together yeaterday and tunning it up. It went quite well. I did use the stock blade first. Figured might as well use it for a bit. I put the 1” on it a timberwolf. My first cut was on a small 2×4 to check things for alignment. So for the big test. I took a piece of oak 2×6. I took a 1/2 off of it measured it great cut. Took that piece down to 1/4”, still a good cut. Then took it a little farther took that piece down to 1/16” Same great cu...

Read this review »


Big Bang For Your Buck

Big Bang For Your Buck

1484 days ago by Ben | 27 comments »

I love this machine. I purchased this bandsaw in April 2009. I have put it through it’s paces on numerous projects and use it whenever I can. First Impressions I decided on this particular saw after days of research. I ordered it through the Grizzly website. I was so eager to get it that I ended up picking it up from the shipping depot rather than waiting an extra day for it to be delivered to my house. The trucking company loaded it into my truck with a forklift and I was on...

Read this review »


not perfect but next best thing.

not perfect but next best thing.

1491 days ago by charlie48 | 5 comments »

I finally decided to make the switch to a cabinet saw, thinking maybe magically it would make me a better woodworker? well I think the jury will be out for awhile on that one, but like the tool man Taylor I do have more power! I had it delivered to my local lumber yard, I cant thank them enough for helping me out this way!! I had these visions of my brand new magical saw comming in all dented and broken,but it arrived in great shape, so thanks to all the drivers that cared for my new toy on i...

Read this review »


Two more cents on the Griz 453Z

Two more cents on the Griz 453Z

1493 days ago by alnandy | 7 comments »

Just got mine in earlier this week. I’d been using a Delta 13” planer, which was doing a very good job. However, Delta got bought out and no longer produces this planer, so parts will be a problem in the future. Also, I’ve got several hundred board feet of curly maple to work through, and that would overwhelm the Delta. So, I bought the Grizzly. My experience was exactly the same as the previous review, except that my machine arrive without problems. The caster mechani...

Read this review »


« prev 1 ... 10 11 12 13 14 15 16 ... 21 next »
201 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase