LumberJocks

Reviews: Grizzly

  • Advertise with us
Kudos to Grizzly for an easy Saw to set up

Kudos to Grizzly for an easy Saw to set up

05-21-2011 07:38 PM by lilredweldingrod | 53 comments »

This review is just for unloading and assembling the Grizzly G0690 10” 3hp cabinet saw. and I will say that most of you will not need the manual at all as far as assembly is concerned. I was very impressed with the construction and workmanship of this saw and the price wasn’t bad either. After getting the saw on the ground and in the shop, we unpacked and checked for any damages. The way they pack these things, is almost impossible to receive damage in normal handling. Everything ...

Read this review »


Grizzly G0690 vs. G0715P

Grizzly G0690 vs. G0715P

05-15-2011 11:24 PM by Alpiner | 17 comments »

If you had read my previous review of Grizzly’s G0715P hybrid saw that I received week before last, you know that I had a serious unsafe issue with it, and I received permission from Grizzly to return it. It’s been reboxed, and will be picked up by UPS freight Tuesday. I was leery of getting the same saw again, so I went ahead and ordered a new G0690 cabinet saw, which is what I was considering ordering in the first place. I just wasn’t sure if the $500 price difference w...

Read this review »


What did I get myself into?

What did I get myself into?

05-08-2011 05:39 AM by Alpiner | 73 comments »

I recently sold my 15-year old Jet contractors saw on Craigslist with the intention of upgrading to Grizzly’s new hybrid saw. I was tired of the extraneous sawdust the Jet produced even though I had the saw connected to a 2 HP Grizzly dust collector. Other than that, the Jet came perfectly set up, and I never had to make any adjustments through its 15 years of dedicated service. I received the new Grizzly G0715P this past Tuesday, and had a neighbor assist me in locating it to my b...

Read this review »


Grizzly G0529 Oscillating Spindle & Disk Sander

Grizzly G0529 Oscillating Spindle & Disk Sander

05-07-2011 05:00 PM by CreekWoodworker | 9 comments »

I purchased this tool about nine months ago and it has become one of my most used tools. This tool is heavy (180 lbs) and will require two people to set it up. The setup itself is fairly easy, the top portion of the sander comes assembled with the two tables attached. However, this is what makes it heavy and difficult to work with. The box the sander was delivered in was too large to fit through my basement door. My son I removed the top portion which is probably 90% of the weight, but it...

Read this review »


Grizzly G0453Z

Grizzly G0453Z

04-15-2011 03:06 AM by Scott H. | 4 comments »

I purchased the Grizzly G0453 15” planer with the spiral head cutter. It works like a dream! There is some snipe on the front of the board “at times” which is to be expected. I just make sure that the board is a little longer than what I need for the finished board. The snipe isn’t that deep. Most of the time it takes only a little sanding and it disappears. It was packed very well for shipping. It was actually in a wood crate. After I unpacked it, I used one roll of paper towels and sever...

Read this review »


G0490X jointer

G0490X jointer

03-04-2011 02:00 AM by TJU | 7 comments »

It has taken me a few weeks but I have finally got my new planer and jointer all adjusted and running. I ran about 30 bf a cherry through them for a project I am working on. This is the first Grizzly purchase that I have made and I will definitely look at Grizzly when I go to upgrade my 9” crapsman band saw that I got for $35 on Craig’s list.The fit and finish we about what I expected. I took about 5 minutes to file the sharp edges and scrape a few drops of paint off the jointer fenc...

Read this review »


G0453Z Review

G0453Z Review

03-04-2011 01:12 AM by TJU | 6 comments »

It has taken me a few weeks but I have finally got my new planer and jointer all adjusted and running. I ran about 30 bf a cherry through them for a project I am working on. This is the first Grizzly purchase that I have made and I will definitely look at Grizzly when I go to upgrade my 9” crapsman band saw that I got for $35 on Craig’s list.The fit and finish we about what I expected. I took about 5 minutes to file the sharp edges and scrape a few drops of paint off the jointer fenc...

Read this review »


Affordable Drum sanding Finally

Affordable Drum sanding Finally

02-25-2011 06:28 AM by sawblade1 | 21 comments »

Today I received this little guy in my shop :) Drum sanders are expensive especially conveyor fed ones however Grizzly’s new 10” drum sander fits the bill at 345.00 and put it into the range of most average woodworkers. To have one is a luxury but a well deserved one. The sander left the boards smooth and scratch and track mark free. I set mine up with 180 grit paper instead of the 80 grit it came with. I only give it five stars with a few exceptions. On the sander I received ...

Read this review »


Couple annoying setup issues, but all in all... I'm pleased.

Couple annoying setup issues, but all in all... I'm pleased.

02-10-2011 04:15 AM by 2bigfeet | 7 comments »

It cuts very nicely. Leaves a glass like finish, is quieter cutting than my old 6” Powermatic model 50, the depth of cut lever moves effortlessly, table and fence are flat as a pancake… bonus. I was a little concerned early on with vibration. I had started it before I had the fence assembly on just to be sure the motor/cutterhead alignment was good. The on/off switch post was vibrating considerably, but after the weight of the fence assembly went on it was steady as a rock. I will...

Read this review »


Go548z

Go548z

02-02-2011 07:49 AM by widdle | 10 comments »

Just assembled and fired up my first dust collector. the 2hp grizzly with the canister filter. Went together quickly with no problems.have not hooked it up to any machines yet ( no hose) sounds powerfull.But loud. I have nothing to compare with …But that beast is loud,may have to find a closet outside..Seems well made and sturdy

Read this review »


« prev 1 ... 9 10 11 12 13 14 15 ... 21 next »
209 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com