LumberJocks

Reviews: Central Pnuematic

  • Advertise with us
Basic, reliable workhorse, lacking finer features, but well worth the money.

Basic, reliable workhorse, lacking finer features, but well worth the money.

03-24-2010 05:55 PM by dbhost | 34 comments »

A quick rundown of the Central Pneumatic 97526 23ga pnuematic pin nailer. For starters, this IS a Harbor Freight tool. And like most Harbor Freight stuff, it is lacking many of the more refined features of more expensive tools. But at a price of $22.99 minus a 20% coupon discount, you can walk into your shop with one of these, and a fatter wallet to boot! Air consumption was reasonable as my little 2 HP 8 gallon compressor (Central Pneumatic 95386 easily able to keep up with the air demand...

Read this review »


HOLY CRAP- Why pay $100+

HOLY CRAP- Why pay $100+

02-01-2011 03:07 AM by StumpyNubs | 34 comments »

Gotta say I never had much luck with the Harbor Freight (central pnuematic) brad nailer. But after trying out the micro pin nailer, I may just give the brad nailer another shot. This is a great buy- one of MANY diamonds in the rough at Harbor Freight. Here’s the details.. First of all, I was surprised that it was not made of plastic. The body is all is cast metal like the more expensive ones, and it feels good and heavy in the hand. Not that this is a vital feature, but it distrac...

Read this review »


Surprising performance for a cheap spray gun

Surprising performance for a cheap spray gun

09-11-2012 02:34 PM by CueballRosendaul | 20 comments »

Several months ago, I bought this hopper type spray gun at Harbor Freight. I intended to use it to finish a batch of unfinished oak furniture we bought, but I chickened out and finished it all by hand because I didn’t trust this sprayer. Normally sells for $20, I think I paid $16 on sale. I don’t have a high capacity compressor, just a small 3.7 SCFM shown in the last picture, but this little gun didn’t care. It would never work to paint a house or fence, but to have in t...

Read this review »


Not exactly a fine woodworking tool, but it sure does drive nails!

Not exactly a fine woodworking tool, but it sure does drive nails!

09-29-2010 07:57 PM by dbhost | 17 comments »

I have now owned mine for about 6 months, and put it through plenty of hard paces. The good, the bad, and the ugly of it… The good…Purchase price $49.99 (had a GREAT coupon)...Drives a good variety of nail sizes.Safety works very well.Reasonable magazine capacity. The bad…Uses a LOT of air. My little HF compressor cycles a LOT when I use this thing.Shortest nails this will shoot 2-3/16”, would like to shoot 2” nails with it.Limited to 28 degree nails.Lack o...

Read this review »


Despite being kind to me, 4 years of use has been unkind to this compressor

Despite being kind to me, 4 years of use has been unkind to this compressor

09-08-2014 09:10 PM by paxorion | 11 comments »

If there’s one tool I use every time I try to get any woodworking done, it’s my HF air compressor. Everytime I get any woodworking done at home, the first tool I fire up is my compressor. I purchased it on a whim 4 years ago, and was giddy to have pneumatic power for the first time. This bare bones unit has (and continues) to serve it’s duty, driving nails (I have a HF 18 gauge brad nailer/stapler) and blowing compressed air. There isn’t much to say about how well ...

Read this review »


Low hit to the budget and shop footprint, not the best capacity.

Low hit to the budget and shop footprint, not the best capacity.

09-17-2010 06:01 PM by dbhost | 10 comments »

Specs are pretty straight forward… Max working pressure 115PSI.Air delivery: 5 SCFM at 90 PSI, 6 SCFM at 40 PSI. Simply put, I have had it for over a year now, and run the snot out of this thing. It sufficiently runs all of my nailers, impact wrench, air ratchet, etc… As long as I keep in mind it has an 8 gallon tank, and don’t expect to not have to wait for the compressor to catch up with me it’s fine. This is not my first compressor, so I can compare it to 2...

Read this review »



First one was a dud, second one is fine.

First one was a dud, second one is fine.

09-29-2010 11:29 PM by dbhost | 8 comments »

Mind you, pnuematic nailers are honestly very simple tools as far as air tools go. The driver is simply a piston, with a simple connecting rod sort of arrangment. You would think that if a company is going to build a product that has a piston, a connecting rod, and motion, that there would be a wrist pin right? Well not in my first one. Now #2 is working great. It leaks a tiny bit of air, but that is my fault. I took the thing apart to inspect it and managed to tear one of the paper gaskets. ...

Read this review »


1/4" Pistol Grip Screwdriver

1/4" Pistol Grip Screwdriver

06-26-2011 04:14 AM by Raymond | 4 comments »

As you can tell I was looking for a few air tools. This little guy is awsome. Tons of torque, drives 3” screws like mad. I can drive about 25 before my compressor kicks in Runs at 4 cfm at 90 psi. Great preformance forward and reverse. The direction selector is conviently located. Again no air fitting included. At 19.99 can’t go wrong, and a one year warentee. Nice fit and finish and great packaging.

Read this review »


6 Piece Pneumatic Scraper Kit

6 Piece Pneumatic Scraper Kit

06-26-2011 04:33 AM by Raymond | 4 comments »

An odd find that actually works very well is this 6 Piece Pneumatic Scraper Kit i bought it with the idea to use it as a power chisel. I adaped some wood working chisels to work with this. It is very quiet yet has 3500 BPM and an air consumption of 4 cfm at 90. It is a nice compact unit and fits the hand well. I have used it to remove a great deal of wood that with a chisel and hammer would have taken much more time. Other features are built in regulator to vary the amount of force applied. F...

Read this review »


1 2 next »
15 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase