LumberJocks

Reviews: Central Pnuematic

  • Advertise with us
Surprising performance for a cheap spray gun

Surprising performance for a cheap spray gun

682 days ago by CueballRosendaul | 20 comments »

Several months ago, I bought this hopper type spray gun at Harbor Freight. I intended to use it to finish a batch of unfinished oak furniture we bought, but I chickened out and finished it all by hand because I didn’t trust this sprayer. Normally sells for $20, I think I paid $16 on sale. I don’t have a high capacity compressor, just a small 3.7 SCFM shown in the last picture, but this little gun didn’t care. It would never work to paint a house or fence, but to have in t...

Read this review »



1/4" Angle Die Grinder

1/4" Angle Die Grinder

1087 days ago by Raymond | 1 comment »

Another good Harbor Freight find in my opinion was this little angle grinder. 1/4” 20000 RPM 3 CFM @ 90 PSI. The 1/8 collet from the other die grinder I purshased the last time I was at Harbor Freight fits this grinder. Pleanty of power, and does not bog down under a load. Like most HF air tools this one did not come with the fitting. I really wish they would include them. This is great for getting into hard to reach spaces. And it was on sale 14.99. Can’t go wrong. Like most of H...

Read this review »


1/8 Micro Die Grinder

1/8 Micro Die Grinder

1087 days ago by Raymond | 1 comment »

Another trip to Harbor Freight the other day finds me bringing home a few more air tool. This little grinder reminds me of the dentist, even sounds like the dentist. 56000 Rpm, 2 CFM @ 90 PSI. The twist on off feature is ok but not very user friendly. I am working on a foot control. It feels nice in the hand and has tons of power. No vibration and the hose is very flexible. 1 year warentee, and came with all the fittings. If your looking for an inexpensive 22.99 $ high speed tool this just mi...

Read this review »


6 Piece Pneumatic Scraper Kit

6 Piece Pneumatic Scraper Kit

1125 days ago by Raymond | 4 comments »

An odd find that actually works very well is this 6 Piece Pneumatic Scraper Kit i bought it with the idea to use it as a power chisel. I adaped some wood working chisels to work with this. It is very quiet yet has 3500 BPM and an air consumption of 4 cfm at 90. It is a nice compact unit and fits the hand well. I have used it to remove a great deal of wood that with a chisel and hammer would have taken much more time. Other features are built in regulator to vary the amount of force applied. F...

Read this review »


Compact Air Die Grinder Kit

Compact Air Die Grinder Kit

1125 days ago by Raymond | 0 comments »

I was looking for a die grinder, and came across this little one 1/4 and 1/8 collets. This is an outstanding little grinder for the money 14.99. Lots of torque. It did not bog down when using a power rasp to remove stock from a piece of oak. At 4 cfm at 90, and 21,000 rpm it has tons of power. Fits the hand well and does exactly what I want it to do. Fit and finish is great. Again no air fittings. Another Harbor Freight tool I would recommend.

Read this review »


1/4" Pistol Grip Screwdriver

1/4" Pistol Grip Screwdriver

1125 days ago by Raymond | 4 comments »

As you can tell I was looking for a few air tools. This little guy is awsome. Tons of torque, drives 3” screws like mad. I can drive about 25 before my compressor kicks in Runs at 4 cfm at 90 psi. Great preformance forward and reverse. The direction selector is conviently located. Again no air fitting included. At 19.99 can’t go wrong, and a one year warentee. Nice fit and finish and great packaging.

Read this review »


Air Screwdrver

Air Screwdrver

1125 days ago by Raymond | 0 comments »

Another jem I picked up at Harbor Freight, this little inline air screwdriver really works well. 6 cfm at 90 psi, this little guy is an impact driver and really drives the screws home. Quick release chuck accepts standard hex drive bits. Another 19.99 Gem I highly recommend. Like most air tools from Harbor Freight no air fitting was included. Packaging was great and again has the 1 year warentee. Finish is suprisingly good. Fits the hand well and has ample power in forward or reverse.

Read this review »


Harbor Freight Air Drill

Harbor Freight Air Drill

1125 days ago by Raymond | 0 comments »

I reciently was at Harbor Freight and picked up a few goodies. I have been looking for a few air tools lately and since I have had good luck with Harbor Freight tools I figured to give them a shot. My first item was the 3/8” Reversible Air Drill With Keyed Chuck and Key 19.99, 5 cfm at 90 1700 rpm. Out of the box it looked great no packing grease to remove, packaged nicely in bubble wrap with instructions and a chuck key, no air fitting (would be nice if that was included). I have been ...

Read this review »


HOLY CRAP- Why pay $100+

HOLY CRAP- Why pay $100+

1270 days ago by StumpyNubs | 34 comments »

Gotta say I never had much luck with the Harbor Freight (central pnuematic) brad nailer. But after trying out the micro pin nailer, I may just give the brad nailer another shot. This is a great buy- one of MANY diamonds in the rough at Harbor Freight. Here’s the details.. First of all, I was surprised that it was not made of plastic. The body is all is cast metal like the more expensive ones, and it feels good and heavy in the hand. Not that this is a vital feature, but it distrac...

Read this review »


1 2 next »
14 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase