LumberJocks

Reviews: Chicago Electric Power Tools

  • Advertise with us
Out of the box review and initial impressions.

Out of the box review and initial impressions.

1322 days ago by dbhost | 28 comments »

A full review post use, and swapping blade to a proper blade are going to be in the works, but I figured I would post this up now to give you guys a heads up. I may just edit this review when I am ready, who knows? This is NOT a usage, or long term review, this is just a fit and finish sort of thing. So if that is what you are interested in, read on… I picked up a Chicago Electric #98194 on Friday with a coupon I have been sitting on for a few months that expired on Sunday, so it ...

Read this review »


Chicago Electric Circular Saw Blade Sharpener

Chicago Electric Circular Saw Blade Sharpener

796 days ago by Craftsman on the lake | 28 comments »

Addendum after 72 days: My old dewalt blade seen on the bench in the video below is what I sharpened next. I sharpened up pretty nicely. In fact I’m leaving it in the saw for a bed build and I’ve been working with Walnut, maple, and jatoba for this. So far the blade that I sharpened has been working really well. So well in fact that I think I’ll spruce up this sharpener with new knobs, and a few washers to help align things. I’m upping my rating a star. I’d se...

Read this review »


Chicagoe Electric Flex Shaft Carver

Chicagoe Electric Flex Shaft Carver

253 days ago by Jim Jakosh | 25 comments »

I am not a carver but sometimes a project requires some carving or shaping and I have been doing it with a Dremel 4000. Well last week that thing got real hot when using a 3/4” shaping tool that I decided I needed one of those flex shaft carvers with a small stylus in my hand instead of the big Dremel. I think this job killed the Dremel because it does not wind up to top speed any more. So I looked at Wecheer carvers at $204 and 1/6 hp and Foredom’s at around $400 and I decide...

Read this review »


Initially I was excited about getting this then thoroughly disappointed after using it.

Initially I was excited about getting this then thoroughly disappointed after using it.

1607 days ago by LarryDNJR | 24 comments »

I was looking for a cheap but effective option for cutting pen blanks since I don’t really have a workshop setup yet for the space nor the money for a large band-saw or table-saw even. So searching around on the internet I found this tiny little table-saw at Harbor Freight. http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=93211 Listed at $39.99 it didn’t seem like to bad a deal. It claims it can cut 3/4” and cuts at 14,000rpm which should be just fine...

Read this review »


Great Starting Sprayer

Great Starting Sprayer

1448 days ago by shopmania | 24 comments »

I had been looking for a sprayer for my latest project, a blanket chest made with quarter saw white oak. I really wanted the finish to look good. I read a lot of good/great reviews on the Rockler sprayer. Then I found one at the new Harbor Freight in my town for about $50 less. I did a lot of research on the net, and found a review on another site that said the Rockler and Harbor Freight were the same machine. In looking at the pictures, they certainly look identical. I’ve heard/r...

Read this review »


Great for occasional work- But plastic fence is a problem.

Great for occasional work- But plastic fence is a problem.

1272 days ago by StumpyNubs | 19 comments »

I almost never use biscuit joinery, but when the Chicago Electric Plate Joiner went on sale at Harbor Freight for $30 I bought one. Since nobody’s reviewed it yet, I thought I should give my observations. First of all, Harbor Freight is a wonderful store full of a LOT of great tools, some of very high quality and all for very low prices. But as a general rule I never buy their hand power tools. There’s just too much orange plastic! But I took a chance on this one and the result...

Read this review »


Long term review, the good, and the bad.

Long term review, the good, and the bad.

152 days ago by dbhost | 13 comments »

I have had this saw for several years, and have used it quite extensively and I think I have found, and worked the bugs out of it, more or less. I have a write up on my blog of course at http://daves-workshop.blogspot.com/2014/02/chicago-electric-98194-12-sliding.html but to summarize… The blade and dust collection issues I noted early on hold as true today as they did then, which is why I built the dust hood. I don’t find the dust collection to be any worse than other sliders ...

Read this review »


Chicago Electric Chainsaw Sharpener

Chicago Electric Chainsaw Sharpener

770 days ago by TZH | 13 comments »

Got one of these for my birthday this year, just tried it out. For the money, I’d have to say it is a great value. A little play in the handle, but not any more than I’d expect for the price. Harbor Freight has them right now for just under $40. If you’re into tight tolerances, this isn’t the tool for you. But if you’re like me and don’t need exact tolerances, this is a really good buy, in my opinion.

Read this review »


Leaves a rough finish

Leaves a rough finish

1056 days ago by DurocShark | 9 comments »

http://www.harborfreight.com/120-volt-circular-saw-blade-sharpener-96687.html Haven’t seen anybody review this, so I thought I’d give it a go. I posted it on my blog a while back, but nobody reads that. ;-) I’d been looking at this sharpener for years at HF. Sending my carbide blades out can get expensive so I needed a way to do the work myself. You can only block the teeth with a diamond card so many times… I picked it up on sale for $59. When I got it and...

Read this review »


Value

Value

462 days ago by Mark Davisson | 8 comments »

I had become frustrated with my wooden, shop-made feather boards. I could never get the length of the “feathers” or the spacing/gaps between them to be just right for the type and thickness of wood being used. They were either too stiff or too weak. Knowing I was going to be ripping a considerable amount of thin stock, I wanted something safer, so I decided to give Harbor Freight a try. I’ve used this feather board every day for the past month – mainly on my TS b...

Read this review »


1 2 next »
12 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase