LumberJocks

Reviews: Veritas

  • Advertise with us
Lee Valley’s Veritas Dovetail Saw Guide System.

Lee Valley’s Veritas Dovetail Saw Guide System.

06-27-2010 04:05 AM by Gord Graff | 28 comments »

.........................”perfect fitting hand cut dovetails in a matter of minutes without the learning curve”. Veritas® 1:6 Guide with Saw Are you intimated by hand cut dovetail joinery? Have you avoided incorporating dovetail joinery into your woodworking because you feel that the learning curve for hand cut dovetails in far too steep and you don’t want to commit to complicated and expensive router jigs? Let me assure you that your fears are no longer warranted. Le...

Read this review »


Even Better With A Few Modifications

Even Better With A Few Modifications

10-21-2014 09:38 PM by OSU55 | 7 comments »

I’ve had one of these for about 2-1/2 years. Typical of Lee Valley / Veritas tools, everything’s great. You can read all about adjustments, available blades, and the rest in the manual from their website. The tool provides excellent results, but does have a learning curve, and there are a couple of things that make it an even better tool. Initially I ended up with an overly aggressive cut. It would dig in and stop, spin around, sometimes feeling like a slot car on a wiggly piece of track ...

Read this review »


Veritas Small Scraping Plane

Veritas Small Scraping Plane

10-27-2012 04:00 PM by vipond33 | 15 comments »

There are things you can do with a scraper that would defeat even the finest of hand planes. The micro geometry of their cut produces a Type II shaving, yielding a perfect surface even going fully against interlocked grain or over knots. I use a variety of scrapers and for spot work nothing beats a card type or even an ordinary paint scraper. One problem with these types is that they will follow any undulations on the existing surface as they have no registration (sole). For larger wor...

Read this review »


Veritas Low Angle Jack Plane

Veritas Low Angle Jack Plane

11-22-2010 05:25 AM by Gofor | 11 comments »

Purchasing: Done online, no problems, and delivered well packaged on the date promised. Quality: Very impressed. All parts are closely machined and close tolerance. Sole flat, sides square, and irons sharp, but I did hone them with 2000 grit wet/dry paper (scary sharp method) and green buffing compound. Comparability: Comes in a little larger than a Bailey #5 (more like 5 1/2), in width, length and weight. Iron width is 2 1/4” vs #5 Bailey at 2” and #6 at 2 3/8”. Hand...

Read this review »


Tool Review - Veritas Set-Up Blocks

Tool Review - Veritas Set-Up Blocks

06-04-2011 05:58 PM by Randy Price | 9 comments »

Veritas Set-Up Blocks(ed. note: This is a companion post from www.randallprice.com).For the first tool review on www.randallprice.com I’ve chosen a one that is by far the of the most often used tools in my shop and one that has raised the accuracy and precision of my work to a new level – Veritas® Set-Up Blocks.As you may have already found, transferring measurements is a much more accurate method of set up than taking a measurement from a rule. This is where the Veritas set-u...

Read this review »


The Veritas O1 Bench Chisels - reviewed

The Veritas O1 Bench Chisels - reviewed

05-17-2012 11:35 AM by Derek Cohen | 15 comments »

What’s in the box …....... ? Why, the new Veritas O1 Bench Chisels! Reviewed here: http://www.inthewoodshop.com/ToolReviews/VeritasChiselReview.html Regards from Perth Derek

Read this review »


Super Spokeshaves

Super Spokeshaves

09-20-2012 03:01 PM by CartersWhittling | 13 comments »

Hello. I recently bought the Flat and Round Veritas Spokeshaves. http://www.leevalley.com/en/wood/page.aspx?p=49142&cat=1,50230&ap=1 Each sell for $95.00 Cdn and come with the shave, two shims and instructions. Available separately is a handle kit which allows you to make custom handles. Flat Spokeshave First ImpressionsMy first impressions opening the box and pulling out the shave was the weight of the tool. It has substantially more heft than my old Stanley #51. This ...

Read this review »


Veritas 1:6 Dovetail Saw Guide Model 05T02.01

Veritas 1:6 Dovetail Saw Guide Model 05T02.01

01-09-2014 11:23 PM by Jerry | 8 comments »

I got this wonderful little guide for Christmas and just now had my first opportunity to try it out. It took me a couple of minutes to wrap my head around how it works, but once I did, I was pretty impressed. You set the clamp in one set of grooves for the tails, and then slide it off and set it into a second set of grooves for the pins. I say set of grooves, but that’s somewhat misleading. There are three grooves in all, but the center groove serves double duty and is used in both orie...

Read this review »


Veritas T-Slot Router Bit

Veritas T-Slot Router Bit

06-28-2014 01:18 PM by Lumberpunk | 9 comments »

I love this bit, have owned for about a year now and used on several projects. At $22 Canadian I figure I have saved $60 or $70 on buying t-track for my jigs. The bit will cut a slot full depth straight off but I find it best to hog out most of the waste with a 1/4 or 5/16 bit first and then cut the slot. Tend to leave some furry bits on the top of the slot… easily cleaned up with a few strokes with some sand paper. Living way out in the country it also means I can have t-track anytime...

Read this review »


Great scraper burnisher

Great scraper burnisher

01-19-2012 12:43 AM by Tennwood | 12 comments »

I had a Woodcraft coupon about to expire and no other great needs at the time, so I bought the Veritas Variable Burnisher on a whim. (Actually what I went in for they didn’t have in stock that day). I normally sharpen my scrapers using a wet stone and round burnisher getting ok results. I can always get shavings, but not like they should be. Retail cost of the Veritas is $32.50, but with my coupon, I figured I couldn’t loose too much. It turned out to be a great deal. The i...

Read this review »


1 2 3 4 ... 10 next »
91 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase