LumberJocks

Reviews: Veritas

  • Advertise with us
disappointed in Veritas

disappointed in Veritas

01-22-2015 04:21 PM by libraryman | 12 comments »

My son presented with me with a Veritas low angle spokeshave for Christmas. We were going to use it for shaping an oak axe handle we had cut out. I initially tested it on Christmas day using some pine and cherry scraps around the shop. Worked great on this fairly soft wood. However when we later tried to shape the oak handle the problems began. The blade is held in place by two bolt heads which contact side bevels on the blade. The instructions for the shave say you need to sand the back of ...

Read this review »


Where has this thing been my entire woodworking career?

Where has this thing been my entire woodworking career?

01-12-2015 08:06 PM by paxorion | 5 comments »

The recent announcement of the Wood Peckers precision framing square sent me down a dangerous path of wondering where I can pull a few hundred bucks out of my budget for an impulse buy. After sanity checking myself, I decided that I need to bring myself back to reality and ask if there was an alternative to consider. Enter the Veritas Square Fence. If a framing square were Tom Cruise, it would say “you complete me” to this Veritas innovation. I spotted this innovation in the...

Read this review »


Simple and user friendly, just the way I like it

Simple and user friendly, just the way I like it

01-12-2015 07:43 PM by paxorion | 1 comment »

During a Woodworking Show, I saw the merit of ruler stops and cabinetmaker rulers for my layout. I impulse buy for a WoodPeckers Rule Stop-1 (the smaller brother of the Rule Stop-2 review that gave me the motivation to get to writing this review) and eventually decided that $30 was too much money to splurge. After waltzing over to the Lee Valley/Veritas booth, I spotted this Veritas Ruler Stop in their catalog and I figured it would be a good alternative. I picked this up and a 12”...

Read this review »


Veritas Low Angle Jack Plane

Veritas Low Angle Jack Plane

11-18-2014 12:25 AM by Chuck Anstrom | 10 comments »

Earlier this year, I purchased a Veritas Low Angle Jack Plane from Lee Valley. I have one other Veritas plane, a Medium Shoulder Plane. Like the first, the Low Angle Jack Plane is a tool of beauty. Superbly crafted and machined, it is a pleasure to use. Last week, I received a letter informing me of a possible fault in the plane. I checked my plane and the fault did not exist. I find it unique and extraordinary that a firm would provide this level of service—— If it is n...

Read this review »


Even Better With A Few Modifications

Even Better With A Few Modifications

10-21-2014 09:38 PM by OSU55 | 7 comments »

I’ve had one of these for about 2-1/2 years. Typical of Lee Valley / Veritas tools, everything’s great. You can read all about adjustments, available blades, and the rest in the manual from their website. The tool provides excellent results, but does have a learning curve, and there are a couple of things that make it an even better tool. Initially I ended up with an overly aggressive cut. It would dig in and stop, spin around, sometimes feeling like a slot car on a wiggly piece of track ...

Read this review »


Works Well with Only One Negative

Works Well with Only One Negative

09-28-2014 10:03 PM by walden | 38 comments »

I purchased Lee Valley’s new Veritas custom plane when it first became available. After messing around with it for a few days, here are my thoughts. 1) The plane is built well and looks a lot better than their old line of bench planes. It feels nice and heavy and is about the same weight as a Lie-Nielsen (LN) #5. I bought mine with the “medium” traditional tote in the back and the middle-sized knob in the front. This gives it the same feeling in the hand as old Stanley or...

Read this review »


Great Saw for dovetails

Great Saw for dovetails

07-29-2014 12:27 AM by mramseyISU | 4 comments »

I picked this saw up a couple weeks back to try my hand at hand cutting dovetails after losing 4 teeth out of a Japanese style saw on one drawer. I’d read that the Japanese saws aren’t as good on harder woods like white oak which is what I mostly use, wish I would have read that before I bought the thing but other than that it’s a nice saw and I’ll keep it around I think. Back to the review at hand though. I started the process of laying out dovetails on 4 drawers and ...

Read this review »


Veritas T-Slot Router Bit

Veritas T-Slot Router Bit

06-28-2014 01:18 PM by Lumberpunk | 9 comments »

I love this bit, have owned for about a year now and used on several projects. At $22 Canadian I figure I have saved $60 or $70 on buying t-track for my jigs. The bit will cut a slot full depth straight off but I find it best to hog out most of the waste with a 1/4 or 5/16 bit first and then cut the slot. Tend to leave some furry bits on the top of the slot… easily cleaned up with a few strokes with some sand paper. Living way out in the country it also means I can have t-track anytime...

Read this review »


Veritas Vietnamese style hand plane

Veritas Vietnamese style hand plane

06-25-2014 11:16 PM by cdaniels | 6 comments »

Just figured if post a couple pics of my Vietnamese style hand plane I got from veritas for 62$. It’s 245mm and comes hand tuned with a camber allready on the blade! Made from rosewood I believe and I’m very impressed so far.. Will update once it gets some abuse. Iron sides

Read this review »


Veritas jointer fence

Veritas jointer fence

03-29-2014 04:35 PM by naked_wookie | 4 comments »

I recently picked up the veritas jointer fence from lee valley to use with my low angle jack plane to joint some 6/4 walnut for my wifes desk.I am fairly new to hand tools and with that I am not the steadiest when prepping boards edges yet.This fence changed that. I was able to joint the entire 7 foot length of my boards smoothly and nice and square.The instructions for this tool are very clear and explain what to do if your planes wings aren’t square to the sole.Thankfully mine is so t...

Read this review »


1 2 3 4 ... 10 next »
94 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase