LumberJocks

Reviews: Triton

  • Advertise with us
Triton MOF001KC 2-1/4 HP Plunge Router

Triton MOF001KC 2-1/4 HP Plunge Router

1025 days ago by woodmaker | 21 comments »

I am so impressed with this router.I was looking for a permanent under the table router, but I didn’t want to pay $200 + for the router and another $300 + for a router lift. The Triton includes the crank handle. just drill the hole for it, insert crank and raise and lower. I also like the fact that the collet is automatically locked at full height making bit changes really easy. The only thing I wish for (and from any router co.) is that they include a template to help affix to the rout...

Read this review »


Triton Upgrades Their Above Table Micro-Adjuster Worm Gear

Triton Upgrades Their Above Table Micro-Adjuster Worm Gear

1140 days ago by HorizontalMike | 15 comments »

I have had my Triton 3 1/4hp router since last June 2010 and did not get to use it much until the last couple of months. I mounted this router on my TS extension and drilled the appropriate hole in the cast iron router extension and was good to go. The lifting mechanism worked well at first and then began to slip and eventually failed to lift, though adjustments could still be made when lowering via the above-table micro-adjuster. I called HTC-Triton (HTC are the new owners) in Michigan ...

Read this review »


Cannot tighten bits in Triton Router

Cannot tighten bits in Triton Router

1143 days ago by Paul | 22 comments »

When using the 1/4 inch collet adapter I just cannot tighten the bit securely. I know enough to leave it not quite bottomed out in the chuck and I know that if I tighten it any more it will shear the router away from the mounting plate. The 1/2 inch bits seem to be much more secure. I think the way it is it is a dangerous situation because the bit will ‘climb’ out from the collet.I E Mailed the Triton people over a week ago and have gotten no response (yet).Has anyone els...

Read this review »


Triton 2 1/4hp plunger router

Triton 2 1/4hp plunger router

1172 days ago by SchotterWoodworking | 6 comments »

WOW! This was my Christmas present this year and I have been impressed every time I use this router. The construction of the tool is outstanding to say the least. The brushes are easy to access, the plunge is smooth and easy to control, the rack-and-pinion plunge is very groovy, even the depth turret is user friendly and easy to adjust. The depth stop itself is idiot-resistant and hasn’t slipped on me yet (unlike the Freud model). I didn’t know if I would like the one-wrench colle...

Read this review »


Triton Router Catches fire.  Helpful Customer Service.

Triton Router Catches fire. Helpful Customer Service.

1203 days ago by Ken90712 | 27 comments »

For those of you that read my safety in the shop post, Thank-you for all the kind thoughts and words! http://lumberjocks.com/topics/23154 I will be replacing my fire Extinguisher today, glad I have them. First let me say, I have Love my Triton router that I bought in March. I was so bummed all weekend when it caught on fire Fri. It took me a while to find a service center on line, as there is only one Authorized Service Center for Triton in the country, in Fair Haven Mich. Of course wit...

Read this review »


Triton: Works and definitely worth the money - though can be hard to find.

Triton: Works and definitely worth the money - though can be hard to find.

1317 days ago by Elizabeth | 13 comments »

I had read about various enclosed-air systems while setting up my shop. I knew I wanted one because I haven’t yet got a proper dust collection system in place and didn’t want to wait to do anything until I had one. I liked the look of the Triton Tools Power Respirator and read some positive reviews so I decided to get one. That was easier said than done. Many reviews are a few years old and the companies mentioned in them no longer sell the unit. One place I saw online has ...

Read this review »


Another full face shield

Another full face shield

1371 days ago by Don "Dances with Wood" Butler | 8 comments »

Greg the Whodat just posted his new face shield.I didn’t want to hijack his review, so I’m posting my own. Greg’s shield is a good one and the Triton PRA001 is probably more expensive. But I wanted to explain some of its advantages. Triton saw good to include earmuffs and they’re good one. They can be locked out away from the head for when you want to hear something and when putting the headgear on and off.There is no option for front or back battery location. It...

Read this review »


Triton 3 1/4 HP under table review

Triton 3 1/4 HP under table review

1531 days ago by Craftsman on the lake | 32 comments »

Addendum to this review 10/28/2010: A problem is being solved regarding below.You should read these addendums up from the bottom.After many months I finally decided to replace the nylon rack with the new steel one triton sent me (see previous addendums). Disassembly wasn’t to bad, about an hour in all to replace the part. I’ve been using this router in my table for a long time now even with the defective fine adjustment part. I find it ideal for table use. I can’t speak for ...

Read this review »


Triton Service update

Triton Service update

1544 days ago by DanW | 16 comments »

I purchased a 3 & 1/4 hp Triton TRA001 router almost 3 years ago. The first thing I did was build a router table around it. I have used it exclusively in the table since. a week ago I noticed that I had somehow cracked the lower casing in the area of the collet pin. I called the toll free number and explained what I had. The lady (I don’t recall her name, I wish I did) was professional & friendly. I explained that I didn’t have my sales receipt but, I had the date of manuf...

Read this review »


Problems with adjusting the height of the cutter

Problems with adjusting the height of the cutter

1694 days ago by velocette | 5 comments »

I have the 3 1/4 HP Triton router and over time have been reading the reviews and note the main complaint is the under the table adjustment. In Australia where the Triton company started there is a large range of wood working accessories. The Triton router table provided easy access to the ratchet winder and the fine adjuster, there is also a dust collector bucket that has two inputs one for the table and one for the router and the bucket is attached via another hose to a vacuum cleaner. I...

Read this review »


1 2 next »
15 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase