LumberJocks

Reviews: iGAGING

  • Advertise with us
Fabricating iGaging DRO for 15" Planer

Fabricating iGaging DRO for 15" Planer

01-10-2012 09:27 PM by rawdawgs50 | 5 comments »

I wanted my planer to have digitized measuring but did not want to spend a couple hundred doing this. I recently purchased a Digital Read Out …DRO…from iGaging. I got it on amazon for $33.50 plus free shipping. When I received the unit, the lcd screen protector was cracked. The LCD protector is actually glass. I contacted iGaging and they responded very fast to my email, and after a few questions they shipped out another unit the next business day. Even though I live in Florid...

Read this review »


Snap-Check delivers accuracy and ease of use

Snap-Check delivers accuracy and ease of use

11-23-2015 08:09 PM by pintodeluxe | 16 comments »

This type of tool has been available for a long time now. Usually they are cast iron and nearly $200. They are available from chipsfly.com for $20, which includes 3 batteries. I think 3 batteries might be worth the asking price. This is an accurate tool. Once zeroed, it reads zero each time the plunger returns to the reference surface. Great for setting jointer knives. Magnets in the base attach the snap-check to any cast iron tool surface for hands-free measurements. I don’...

Read this review »


Install of iGaging DRO for 20" Grizzly planer

Install of iGaging DRO for 20" Grizzly planer

01-25-2016 01:31 PM by zatoechi | 3 comments »

I just wanted to briefly share a different approach to mounting a DRO on a planer that does not require complicated fabrication. This is not meant to be a comprehensive product review but instead piggyback on a previous (and very good) review – http://lumberjocks.com/reviews/2573 There are two main differences in this approach. The first is using an aluminum extrusion as the main means of mounting the DRO to the planer. The extrusion used is 1” x 1.5” cross-section with...

Read this review »


Nice little Digital Depth Indicator

Nice little Digital Depth Indicator

01-15-2010 08:53 PM by GaryK | 15 comments »

Being a sucker for new tools, when I got an e-mail for this I couldn’t pass it up for the price. You want to check the depth of a dado or a rabbet? This little thing will do the job. Make a little “U” shaped block with a hole thought it and then use it to straddle your saw blade or router bit and use it to set your depth of cut. One real nice thing about it is the tab on the back. It’s exactly like the one your find on the back of dial indicators so you can mount...

Read this review »


Great little square for the price.

Great little square for the price.

10-20-2010 01:34 PM by docholladay | 9 comments »

First off let me say that I have several Starrett and Brown & Sharpe squares, dividers and other layout tools. I have a 4” Starrett Double square that I love, but sometimes it is just too small. I had been looking for a matching 6” square. I saw this one on the Eagle America website recently and it happened to be on sale so I decided to take a chance an order one. I was fully expecting a cheap pot metal square with stamped steel blade. When I opened it up, I was very plea...

Read this review »


Angle reader/finder

Angle reader/finder

01-03-2011 11:14 PM by Dan | 21 comments »

I recently learned how to sharpen my own chisels and plane irons. I was having a hard time when it came to all the different bevels. I bought a cheaper honing jig that works well but it does not measure the angle I am honing. I tried using a protractor and had some success but I still felt I was off. I was looking at Rockler tools online and saw this item was on sale. It had good reviews and the price seemed good so I ordered it. The item arrived ready to use. There were no complicated ...

Read this review »


Digital Height Gauge

Digital Height Gauge

06-30-2009 08:51 PM by Routerisstillmyname | 3 comments »

Some indulgence on my part and to treat my self to more digital technology.This height gauge (although by no means a requirement in the shop) sure makes height adjustment a breeze and fun for saw blades, dado stack and router bits. The read out can display inches, mm and fractional with ABS and hold functions.It is extremely solid built with heavy thick base that has magnets. The rest/measuring arm is also ¼ inch thickSo it rests nice on the blades and bits. Has a smooth travel with no play a...

Read this review »


igaging Router lift

igaging Router lift

09-26-2009 07:13 PM by woodsmithshop | 2 comments »

just purchased and installed the igaging MAGNETIC REMOTE DIGITAL ROUTERLIFT, bought this from Eagle America, it was about $20 cheaper than the Wixey, can’t say it is better, I have not tried the Wixey, but thought I would try this one.the installation instructions were not the best I have seen, but after studying them it was easy enough to figure out, the worst part was having to drill and tap holes in my Jessem router lift so it could be mounted, I broke one tap, so I had to move the p...

Read this review »


Digital readout for my router table

Digital readout for my router table

11-14-2009 07:38 AM by GaryK | 9 comments »

My woodpeckers PRL router lift is pretty accurate with it’s little gauge, but I liked some of the features of a digital readout. I actually bought this about 3 months ago and just got around to mounting it the other day. Now that it’s a lot cooler I will start putting a lot more time in the shop. One of the things that I liked most about it is the ABS/INC (Absolute or Incremental) function. Every time you change your bit on the router it changes your Zero setting on your rea...

Read this review »


Almost got it right.

Almost got it right.

03-23-2011 09:43 PM by Routerisstillmyname | 3 comments »

Well, even though I‘ve had a Wixey Protractor( http://lumberjocks.com/reviews/549 ) that is dead on 100% accurate, measured against all my engineering squares and then some, At only $15 on sale, I could not resist picking one of these up.Why you might ask. Well, The Wixey even though is accurate; it has two main shortcomings. One, it is impossible to lock it in place. Second, it does not have the hold function, which should have been incorporated since it will not lock tight.On the other hand...

Read this review »


1 2 next »
18 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com