LumberJocks

Reviews: iGAGING

  • Advertise with us
More Accurate & Quicker

More Accurate & Quicker

169 days ago by OSU55 | 4 comments »

Traditionalists will roll their eyes and mumble bad words seeing a marking gauge with a battery. While not as attractive as the wood and brass version, this tool is more accurate and quicker than the old standard. It is well made and robust (unless dropped on the floor which could break the digital gauge). Made of steel it won’t warp or change with temperature, humidity, and age. The real benefit is having the linear gauge included so the distance does not have to be set using a ruler o...

Read this review »


Fabricating iGaging DRO for 15" Planer

Fabricating iGaging DRO for 15" Planer

955 days ago by rawdawgs50 | 5 comments »

I wanted my planer to have digitized measuring but did not want to spend a couple hundred doing this. I recently purchased a Digital Read Out …DRO…from iGaging. I got it on amazon for $33.50 plus free shipping. When I received the unit, the lcd screen protector was cracked. The LCD protector is actually glass. I contacted iGaging and they responded very fast to my email, and after a few questions they shipped out another unit the next business day. Even though I live in Florid...

Read this review »


Great Value

Great Value

1044 days ago by DylanC | 5 comments »

I picked up this digital caliper for around $30 at a local Rockler. So far I couldn’t be happier. I compared it to a $100+ Mitutoyo at work and they were within a half a thousandth at full scale (5-6 inches). It also has a larger battery, so I’m hoping that it will last longer than the smaller watch battery types. Whats in the box: 6” digital caliper, case, 2 batteries (one installed, one spare). http://www.rockler.com/product.cfm?page=24524

Read this review »


It's made of plastic !

It's made of plastic !

1176 days ago by richgreer | 18 comments »

I use my digital calipers a lot and I tend to be hard on them. I’ve dropped them and poured stuff on them and it seems like I am buying new ones often. I saw this particular caliper on sale for half price – only $14.99. I didn’t need one at the time, but I know that I will eventually need another one so “why not?”. I never imagined that it would be made of plastic. It has a very cheap, flimsy feel to it and it does not have the normal little turn whe...

Read this review »


Don't Bother

Don't Bother

1239 days ago by Routerisstillmyname | 16 comments »

Long story short. This is my second iGaging angle block. The first had a defective LCD on top of displaying constant error even with a fresh battery.This one the LCD is ok but even at a sale price of 20 it’s waste of money since you may have to spend at least half of that in gas returning and exchanging.Measured against all my engineering squares and then some and two other Wixey’s this thing is so off that’s not even funny. The problem is also inconsistency. It’s not always off by sam...

Read this review »


The squares I got were half accurate

The squares I got were half accurate

1239 days ago by RandyMorter | 8 comments »

I ordered these from Hartville Tool through Amazon. I thought the price and specs looked good and I wanted them for setting up my table and other saws. I was also drawn to them due to the wood box. When I got them I held them up to each other to test them. The outsides of the blades all seem true – I couldn’t see any light between the blades of different squares. When I placed one square inside another to test the squareness and insides of the blades I could see varying degrees...

Read this review »


Almost got it right.

Almost got it right.

1248 days ago by Routerisstillmyname | 3 comments »

Well, even though I‘ve had a Wixey Protractor( http://lumberjocks.com/reviews/549 ) that is dead on 100% accurate, measured against all my engineering squares and then some, At only $15 on sale, I could not resist picking one of these up.Why you might ask. Well, The Wixey even though is accurate; it has two main shortcomings. One, it is impossible to lock it in place. Second, it does not have the hold function, which should have been incorporated since it will not lock tight.On the other hand...

Read this review »


Angle reader/finder

Angle reader/finder

1327 days ago by Dan | 21 comments »

I recently learned how to sharpen my own chisels and plane irons. I was having a hard time when it came to all the different bevels. I bought a cheaper honing jig that works well but it does not measure the angle I am honing. I tried using a protractor and had some success but I still felt I was off. I was looking at Rockler tools online and saw this item was on sale. It had good reviews and the price seemed good so I ordered it. The item arrived ready to use. There were no complicated ...

Read this review »


Great little square for the price.

Great little square for the price.

1402 days ago by docholladay | 9 comments »

First off let me say that I have several Starrett and Brown & Sharpe squares, dividers and other layout tools. I have a 4” Starrett Double square that I love, but sometimes it is just too small. I had been looking for a matching 6” square. I saw this one on the Eagle America website recently and it happened to be on sale so I decided to take a chance an order one. I was fully expecting a cheap pot metal square with stamped steel blade. When I opened it up, I was very plea...

Read this review »


Nice little Digital Depth Indicator

Nice little Digital Depth Indicator

1680 days ago by GaryK | 15 comments »

Being a sucker for new tools, when I got an e-mail for this I couldn’t pass it up for the price. You want to check the depth of a dado or a rabbet? This little thing will do the job. Make a little “U” shaped block with a hole thought it and then use it to straddle your saw blade or router bit and use it to set your depth of cut. One real nice thing about it is the tab on the back. It’s exactly like the one your find on the back of dial indicators so you can mount...

Read this review »


1 2 next »
13 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase