LumberJocks

Reviews: Stanley

  • Advertise with us
Good Quality Control could make this an oustanding plane.

Good Quality Control could make this an oustanding plane.

03-22-2010 01:53 AM by Rick Boyett | 16 comments »

Stanley tools has a problem. There was a time when Stanley was a name associated with high quality tools. Tools that could be relied on to get the job done. This was especially true of hand planes. Stanley was the king of hand planes for a long time. Then Stanley decided to make cheap tools and the rest is history. But hey, what’s that, a ray of light over the horizon? Could it be that Stanley wants to reestablish its good name for actually being GOOD? I think that was one of...

Read this review »


New No 93, rabbet, chisel plane

New No 93, rabbet, chisel plane

02-28-2010 04:33 PM by Andrew | 6 comments »

This is my first good plane, in fact it cost more than my 3 other planes all together. I needed a plane that could get into corners, and trim along edges. I wanted to get the 92 it had a 3/4” width as opposed to the 93 with a 1” width, but the 92 was on back order until mid april. My needs are my needs so here goes the 93. It took only a couple of minutes to flatten the back of the iron and hone the edge. The bottom seems pretty flat. After a couple minutes of set up and ad...

Read this review »


Tape measure for those that like decimal and hate fractions.

Tape measure for those that like decimal and hate fractions.

01-13-2010 11:26 PM by GaryK | 32 comments »

I starting out life working in my fathers machine shop while I went to school, we always used the inch decimal system for everything. I still use it to this day. My favorite scale is a flexible 24” that reads in fractions on one side and decimal on the other. Working with decimals is so much easier. How many people know what comes after 27/64’s? I always had to revert to fractions when ever I used a tape measure until now. I never really looked for a decimal tape measure before...

Read this review »


POS Stapler

POS Stapler

12-28-2009 10:39 PM by lew | 19 comments »

About a year ago, I purchased the Stanley TRE550 Electric Stapler. I know it wasn’t the most expensive stapler on the market and I didn’t expect it to be the “end all” of electric staplers. I used it once to make the child’s rocker which probably required driving 150 1/4” staples into oak. It didn’t have great power but then, I didn’t expect it to be a muscle machine and I could live with tapping in the unset staples. Now picture this, I am ...

Read this review »


Buyer Beware!

Buyer Beware!

04-08-2009 04:10 AM by Topapilot | 34 comments »

A store called “Big Lots!” moved into town this winter, and since I’d heard about clamp deals there I went to find out. They do have “deals”, F-type clamps for $6, parallel clamps for $10. I’ve purchased three types of clamps, the first put to the test were these 24” F-style bar clamps. At the store I was carefull to check that they all worked properly, then bought 10 for $60. When using them I found two problems, and one is a show stopper. Fir...

Read this review »


An Old Master

An Old Master

01-08-2009 07:00 PM by DannyBoy | 3 comments »

I happened across a suggestion for this jig in a modern day Arts and Crafts furniture book. I was surprised that I found an old tool like this suggested there since usually books like that are full of merchandise someone paid to have put in there. Anyway, I found one on Ebay and paid about $32 with shipping to have it in my hands. Then, I stuck it in a drawer. And it got covered in dust. Then it was shoved to the back of the drawer to make room for some inferior Craftsman screw drivers...

Read this review »


Fantastic Storage Chest -- Saves Me LOTS of Time

Fantastic Storage Chest -- Saves Me LOTS of Time

02-29-2008 08:51 AM by Hawgnutz | 4 comments »

Boy, where was this years ago?!? I would give it 6 stars if I could! It is deep enough to hold my cordless drill, circular saw, pneumatic nailers, tool bags, planes, nails, screws, spare batterys and still have room for a little more. (It holds LOTS of tools!) Plus it has a wheel that allows me to move it from garage to pickup to site. Now, when I have a large project that will take a couple of days, I can store all my tools in one place until I complete that job! Woo Hoo! The top ha...

Read this review »


Stanley Flush Cut Saw (Dovetail Saw)

Stanley Flush Cut Saw (Dovetail Saw)

01-23-2008 01:47 AM by Zuki | 4 comments »

Website Link I bought this saw about a year ago as I needed a saw to flush cut plugs that I was using to hide countersunk screws. I was walking through Canadian Tire and saw this baby for about $14. The details – from Stanley • Flexible blade cuts plugs or dowels flush • 23-point blade cuts quickly and cleanly on the pull stroke • Double sided blade for convenient cutting to the left or right • Contoured handle is comfortable, provides maximum control • Excellen...

Read this review »


« prev 1 2 3 4
38 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase