LumberJocks

Reviews: Skil

  • Advertise with us
Skil Worm gear saw

Skil Worm gear saw

04-25-2009 06:53 AM by Don K. | 16 comments »

I know many woodworkers do not use a “Worm gear” saw because it is not precise enough for fine detail cutting. But at times I still find I need to use one (other than in my remodel business). A few weeks ago, (before easter) I was asked to build a project for my church (A 20ft tall mountain for a Easter play) and I pulled out my trusty 20+ year old Skil worm drive saw to begin work. Guess what, didn’t work anymore. So I jumped in my truck and head down to my local Lowe’...

Read this review »


Skil 10 in 15 amp tablesaw

Skil 10 in 15 amp tablesaw

08-29-2009 01:49 AM by kosta | 20 comments »

Yo whats up everybody on Wednesday of this week I got my skil tablesaw and I just wanted to give a quick review of it. Now the tablesaw setup will be episodes 40,41,42. In episode 42 I give a quick review of the saw after I make my first cut. Now I have used powermatic, delta/rockwell, jet,and dewalt tablesaws before and this one stood out. For the price I recommend this saw to anyone. The only problem I saw with it was that it didnt have extension wings and I was kinda pissed that it didn...

Read this review »


My Skil 3320 Drill Press

My Skil 3320 Drill Press

09-22-2012 11:11 AM by Dave Rutan | 9 comments »

My drill press is the third bench top tool I bought for my shop. For the price range I think it was a great buy. Out of the box it assembled easily and has served me well. The cross hair laser is helpful for hitting the mark and the on/off switch is right in the front for immediate access. Speed changes are made by moving the drive belt up or down a pair of stepped pulleys. The square table has slots to allow attachment of hold downs or a table. If I had any complaint, it’s that the...

Read this review »


Skil 91024 24-Piece Carbide Router Bit Set

Skil 91024 24-Piece Carbide Router Bit Set

05-24-2011 03:53 AM by BentheViking | 8 comments »

So I just got these off of Amazon. I know that they are not the highest quality set, but they were better than what I had (nothing). I have used Skil bits before and while they certainly not the best, they have always gotten the job done for me. Again for the price (less than $45) it was hard to say no. Mostly I wanted to make this post because when trying to research this set I could not find anything anywhere regarding what is included in this set and I figured now that I have it in my h...

Read this review »


Oldie But a Goody

Oldie But a Goody

09-04-2008 02:45 AM by bbqking | 17 comments »

You guys know that these have been around forever and I know that none of you use them but let me tell you what happened tonight. I bought this saw probably 10-12 years ago. Used it for construction, etc. Has been living under my bench for 5-6 years. Anyway, I needed to cut leg blanks for a table. Only piece of white oak was 10’ long. Did not feel like horsing it over to the TS. Laid the oak over the bench, measured 1” over, and grabbed this saw that has not been used for 5-6 year...

Read this review »


Powerful saw for carpentry work

Powerful saw for carpentry work

12-05-2008 08:12 PM by ferstler | 6 comments »

OK, there have been lots of reviews published about this saw, both in magazine reports and on the internet. However, I have not written any of those reviews. So, here goes my shot at fame. This is a great saw, BUT it is a saw built for use by strong men with strong arms, or at least one strong arm. Why, well, its magnesium case notwithstanding, at 14 pounds it is still very heavy for a circular saw. However, what you get in return is a left-side blade that makes it easier to guide to a scr...

Read this review »


skil 10 in compound miter saw

skil 10 in compound miter saw

03-23-2009 03:38 AM by kosta | 4 comments »

this miter saw is a very nice saw and has a lot of features you would find on a bigger saw. The bevel adjustment is a handle you turn and the saw becomes loose to turn to the left it is only a single bevel saw but it does go 49’ in each direction for miters. It also has the most common angles for crwn molding marked so they are easy to find. I bought my saw for $100 so it not cheap but aint $1300 like the kapex is I take it on jobs with me all the time so this saw can take a beating. Th...

Read this review »


skil 6 in grinder

skil 6 in grinder

04-16-2009 04:14 AM by kosta | 2 comments »

This grinder is a good grinder to start off with but you need to replace the crappy gray wheels that come with the grinder you should get the white ones with dont wear off as much but other than that it is a nice grinder. A good add on is to build bigger platforms or tools rests because the ones that come with this are not very big for a no. 7 jointer plane blade. This grinder costs about $50.00 and their are things to upgrade but nobody buys a a $2000 cabinet saw and doesnt upgrade the fenc...

Read this review »


On The Expensive Side For What It Offers

On The Expensive Side For What It Offers

11-29-2009 11:06 PM by knotscott | 15 comments »

Right from the moment I pulled this saw from the box my heart sank a little bit. With a street price in the $120 range, I guess I expected a bit more than the average $50 DIY type circular saws offer. It’s built like a cheap saw, has the features of a cheap saw, and basically sells from the virtues of it’s unique size. It’s also a butt ugly drab gray, which wouldn’t really matter if Skil would up their game a little bit. It does offer an interesting design that fi...

Read this review »


1/2 lock miter router bit

1/2 lock miter router bit

10-19-2010 09:21 PM by Edward83 | 13 comments »

I saw this while looking through the router bits at Lowes. I never heard of of a lock miter router bit and feeling adventurous I decided to drop the thirty dollars for it in hopes of upping my abilities to build a better quality box. I read the instructions and set it up in my router table. The instructions suggest having a few pieces to practice on, and believe me they weren’t kidding. It says that you can use it on boards up to 3/4 in. but I would do it a little shy. The nature o...

Read this review »


1 2 next »
15 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase