LumberJocks

Reviews: PSI Industries

  • Advertise with us
Why did I wait so long?

Why did I wait so long?

1018 days ago by JohnGreco | 3 comments »

I order all of my pen supplies from Penn State and kept seeing this on their site. I don’t do a whole lot of acrylic work, but when I read reviews on their site saying it worked just as well on a CA finished pen as a final buff, I figured it was worth a try. The directions on the bottle say to sand to 400-600 grit. Wanting to err on the side of caution I went to 600 grit (as opposed to the normal 12,000 I typically use on acrylics) and turned off the lathe. My sanding marks at this p...

Read this review »


csc 2000 from psi

csc 2000 from psi

1142 days ago by paplou | 0 comments »

I have had my csc2000 chuck for over a month now and its way more then I expected for the price. I have turned a few bowls and a couple 11 inch plates plus a few baby rattles and have had zero problems with it. I bought it through Amazon and saved a few dollars. I recently bought the spindle drive for it and only tried it a few times but it work like it should, saves time in that I don’t have to remove the chuck to turn between centers. I have it mount on cheap craftsman lathe and al...

Read this review »


A nice chuck for cheap

A nice chuck for cheap

1176 days ago by bobasaurus | 10 comments »

I purchased the PSI Barracuda 2 chuck system off Amazon to improve my ability to make bowls. The price was very reasonable considering the good quality and extra accessories included. There are four sets of jaws that cover any tenon diameter I could need, and an attachment to make it into a screw chuck. It’s threaded for a 1” dia 8 tpi spindle, which fits my old Delta lathe perfectly (there’s also an adapter for 3/4 16 included). The chuck jaws have ridges to keep a stro...

Read this review »


PSI Sharpening System

PSI Sharpening System

1248 days ago by Moby | 2 comments »

I just recently received this sharpening system to put an edge on my dull turning tools. It does a good job but it could be better. Since the system is 8” in diameter sometimes the lathe bed can get in the way of sharpening the tools, a 9” or 10” version could give it some more room. Other than that it is a great system and you can’t beat it for around $40.

Read this review »


PSI Drill Centering Pen Vise, cheaply made

PSI Drill Centering Pen Vise, cheaply made

1595 days ago by tooldad | 11 comments »

Got this vise with a starter kit from PSI. About a 100 pens later it has come apart twice and caused at least 4-6 students to ruin blanks due to moving while drilling. What seems to happen is the ring spring clamp (I’m not sure what it is called) keeps popping off when tightened. It took 4 hands and a ring separator pliers to get it back on, and that is not an exaggeration. I think it would have been okay in my home workshop, but definitely not high output shops. Called customer ...

Read this review »


Sharpening System

Sharpening System

1641 days ago by David Murray | 7 comments »

This is my first review so bear with me. I needed a way to sharpen my lathe chisels, I didn’t want the expence or have to wait to send them to a sharpening service. I have always been intimidated by sharpening tools so I went to a Rockler store nearby for guidance. They showed me the setup they had for sharpening there turning tools. I gained some valuable tips that day and went about researching products for this purpose. The system I settled on is PSI’s version. I purchase...

Read this review »


Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase