LumberJocks

Reviews: Porter-Cable

  • Advertise with us
Porter Cable 18 Volt Biscuit / Plate Joiner

Porter Cable 18 Volt Biscuit / Plate Joiner

33 days ago by mizzourob | 6 comments »

I know this might be a slightly odd tool review and if you are familiar with the Porter Cable 18 volt line up you are probably scratching your head wondering if you missed something. No you did not, and no you cannot buy this off the shelf at a big box store. But with a little bit of patience and ingenuity this is possible. This is my first biscuit joiner, and I wanted a cordless one. A while back I bought into the 18 volt porter cable lineup (if I knew then what I know now I might have we...

Read this review »


First impressions

First impressions

47 days ago by Nates02gt | 7 comments »

I just picked the drill press up from Lowes today. They honored a 25% Harbor Freight coupon which brought the price down to about $260 out the door. My daughter and I got it set up in about 30 minutes and so far am very impressed. I haven’t measured the runout yet. I do wish that they would make it easier to tilt the table. This is not an issue with this drill press specifically, it was the same on the bench top Ryobi that I just sold. I will update this review as I get more time ...

Read this review »


Solid performer, but change the saw blade is a pain

Solid performer, but change the saw blade is a pain

104 days ago by paxorion | 3 comments »

That’s probably all the saw you’d need – My wife Famous last words for a saw that I quickly became annoyed with. I purchased the saw about 3 years ago during a Lowes fathers day sale. For the price, was quite the bargain. I’ve used the saw for for a much of home repair/renovation jobs, as well as many woodworking projects to break down sheet goods and solid lumber. At 13amps, it’s rated to have less power than many 15amp saws, but I doubt many would experi...

Read this review »


Great Saw but Assembly was Quirky

Great Saw but Assembly was Quirky

161 days ago by mizzourob | 8 comments »

This is my first band saw so perhaps this may not be the best review, but with that in mind I will proceed anyway. I had been looking at bandsaws for a while, and was trying to find one that I thought would fit my needs now and into the future. I just could not justify a benchtop saw as those are not well suited for resawing, but I also wanted to stay in a reasonable budget. Ultimately it came down to this one and the Ridgid. I chose this saw over the orange one due to the closed base which h...

Read this review »


Porter Cable 390K 5" low profile Random Orbital Sander

Porter Cable 390K 5" low profile Random Orbital Sander

220 days ago by GeneR | 21 comments »

First off I have used many, many different sanders before this purchase. I bought this sander to replace a porter cable 1/4 sheet finishing sander that finally gave out after many years of reliable use. I looked at several random orbital sanders that were comparable including the Dewalt version which is more of a finishing sander where this is an all around work horse. The most notable difference between this and other ROS’s is the fact this is very quiet compared to Dewalt, Black...

Read this review »


Porter-Cable Disk/Belt Sander

Porter-Cable Disk/Belt Sander

263 days ago by Tony Strupulis | 6 comments »

I bought this sander because I needed something that would sand at a true right angle. I have a couple other sanding stations that give me all sorts of problems sanding a square edge. This sander has large work tables that can be adjusted to be square to the sanding surface, but not right out of the box. Every time I would tighten the table angle, it would pull itself out of adjustment. This was very frustrating as I was working on a deadline and didn’t have time to troubleshoot the...

Read this review »


Porter Cable should be ashamed to have their name on these

Porter Cable should be ashamed to have their name on these

419 days ago by A Slice of Wood Workshop | 20 comments »

I bought these bits a year and a half ago. They were a “name brand” and in a price range I could afford at the time.This was a major mistake on my part. I bought an expensive sticker with crappy bits in the box. These bits are very cheap and not worth your time or money. I’ve seen reviews on these bits before usually stating that the person just bought them and they work great. That’s the truth. They work great during the “30 day satisfaction” period. These...

Read this review »


table saw

table saw

569 days ago by BJF | 20 comments »

I have been a woodworker for about 3 years, but have only recently gotten serious. Last March I purchased the Porter Cable, from Lowes, $599. I agonized for year over what table saw to buy. Price wasn’t the biggest issue, it was mostly concern over spending a great deal of money and being disappointed in the result. However, from some classes I took and research I did, it became clear that the equipment doesn’t make the woodworker, so to speak. I also realized that size was a...

Read this review »


Porter-Cable PC218C-2 PORTER-CABLE 18-Volt Cordless Drill & Circular Saw Combo

Porter-Cable PC218C-2 PORTER-CABLE 18-Volt Cordless Drill & Circular Saw Combo

591 days ago by kdc68 | 6 comments »

I’ve had this combo set for just over a year now. Overall they work good. The Nicad batteries aren’t as long lasting as I would have hoped. When I had the chance I upgraded to Lithuim batteries. That was an improvement.The drill has its quirks. The chuck isn’t the best. Once in a while the driver or a drill bit comes loose when using it. I have learned to tighten the chuck after a few uses.The cordless saw isn’t bad, but I upgraded to a better blade (the norm). ...

Read this review »


Porter-Cable PCB660DP 15"Floor Drill Press with Laser Guide and Light

Porter-Cable PCB660DP 15"Floor Drill Press with Laser Guide and Light

591 days ago by kdc68 | 15 comments »

I have had this drill press for a year now and have no complaints at all. I have drilled through everything from 1/8” steel plate to 3” hardwood, and used drum sander attachments. Putting this together was easy, even by myself. The fit and finish was perfect. The lasers were dead on. There was zero play in the quil from the top of the 4” stroke to the bottom. The depth stop was dead on and easy to set. Changing speeds is easy and diagramed for my needs. My only complaint (...

Read this review »


1 2 3 4 ... 9 next »
90 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase