LumberJocks

Reviews: Woodpeckers

  • Advertise with us
Woodpeckers multi knobs- fantastic!

Woodpeckers multi knobs- fantastic!

06-05-2014 02:47 AM by GoBlu | 3 comments »

I’ve used both these styles in various jigs,both the mini and regular multi knobs and cannot say enough good about them. I used to spend hours shopping around to find the right diameter knob with the right size thread and right length and the right type. These are very flexible in that you can use them as a through or studded knob. The minis come only in 1/4”, but the larger knobs come in 1/4”, 3/8” or 5/16” standard hex head bolts or nuts. The minis especially hav...

Read this review »


Solidly built, great case.  Nothing cheap and plasticy about this

Solidly built, great case. Nothing cheap and plasticy about this

10-29-2013 02:49 AM by zzzzdoc | 4 comments »

Typical Woodpeckers solid device, here. It’s a corner jig for rounded corners, as well as a chamfer jig for corners. There are 12 different sizes for rounded corners, from 1/4” to 1-1/2”, and 6 different sizes for chamfered corners, from 1/4” to 1-1/2” The jig is solidly milled out of aluminum, with generous tabs for clamping to your workpiece, as well as a solid stable surface for your router to rest on. I was able to easily rout corners in a variety o...

Read this review »


Nifty, useful measuring tool

Nifty, useful measuring tool

10-02-2013 07:32 PM by CharlesA | 0 comments »

Got an email about the rule stop and decided to take chance on it. I thought the price was a bit high, but the ability to use my existing rulers of different lengths was a real plus. It ways that the Rule-Stop-1 is for rulers up to 1” wide, but it appears to me like it would work for up to 1.5” wide. http://www.woodpeck.com/rulestop1.html My thoughts:1) It is really handy for repeated measurements or just to precisely set a stop and them mark using the end of the ruler. ...

Read this review »


Preliminary Review Of The Woodpeckers WDPPACK1 Drill Press Table

Preliminary Review Of The Woodpeckers WDPPACK1 Drill Press Table

09-23-2013 04:29 AM by Brad_Nailor | 25 comments »

I have been debating for a year or so about building/buying a good drill press table for my DP. I have seen a lot of really well done ones on this website, and till a few weeks ago hadn’t really seen anything commercially made that really impressed me. I have worked a couple projects lately that I needed the DP for and just a piece of melamine poorly clamped to the metal table wasn’t cutting it.I went online for design inspiration and was looking for ideas on LJ and at commerciall...

Read this review »


Woodpeckers framing squares

Woodpeckers framing squares

12-15-2012 07:05 PM by mbs | 6 comments »

I needed to check both flatness and squareness across long surfaces and long miter fences. The most accurate tool I had was a Starrett 12” combination square. After a lot of time screwing around I came to the conclusion that the Starrett square wasn’t square and the blade wasn’t long enough to check for flatness. I borrowed my friends Woodpeckers framing square and I was done with the machine setup in no time. And it was perfectly accurate. You can see from the pic...

Read this review »


Woodpeckers Precision Clamping Squares

Woodpeckers Precision Clamping Squares

07-22-2012 12:05 AM by vipond33 | 14 comments »

Next to keeping your fingers attached to your hands, easily the most important thing in regular woodworking is keeping things square. I can’t count the number of times I’ve gotten myself in trouble over the years by being lax about this. The cure to out of square is painful, time consuming and often fruitless. “Oh, it’ll be alright” is the faint siren song in your memory as you look in dismay upon your project. This is what I do for a living so it’s wor...

Read this review »


Woodpeckers Side Winder Router Lift SW350

Woodpeckers Side Winder Router Lift SW350

06-17-2012 12:32 AM by Chris Cook | 11 comments »

This all started with the idea of designing and building my own router lift. I researched what people were doing and found a ton of really cool ideas. I looked at quite a few of the commercial router lifts and just wasn’t ready to pony up $350-$500. During my research I came across the Woodpeckers SW350 router. As it was $239 on Amazon, it kept coming to mind as the solution. So, I figured that I would go ahead and get it. If it’s junk, it goes back to Amazon.Well, it certainly isn’t ...

Read this review »


Router table fence needs work to reach full potential

Router table fence needs work to reach full potential

11-09-2011 05:44 AM by GregD | 4 comments »

I have had the Woodpecker's Super Fence router table fence for a few years now. I got it as part of a router table/lift/fence/legs package, but I’m not going to review those other items here. My overall assessment is that the fence works very well, but only after what was for me a significant amount of tuning. For the price I thought it should have worked nearly flawlessly out of the box, so I’m only giving it two stars. As you can see from the picture, this is a split fen...

Read this review »


GREAT router lift !

GREAT router lift !

11-18-2010 07:29 PM by NBeener | 6 comments »

This really IS a review, so … I’m pointing to it. After spending a fair bit of time, making setup blocks out of UHMW, FOR my Amana glue joint router bit, I can honestly say that I LOVE this lift. The thread pitch and machining make precise dialing in operations—at thousandths of an inch—incredibly easy. Coupled with a height gauge, gauge blocks, or a good rule (I have a Pinnacle 12” that does the job, rather nicely), getting exact bit height is—relat...

Read this review »


Making Woodpeckers Locking Rings Readable

Making Woodpeckers Locking Rings Readable

09-03-2010 03:54 AM by PoppyJo | 7 comments »

Hi to all my fellow Woodpeckers, I just received my set of 8 Locking Rings for the PRL V2. I’m very impressed with the lift, but a little disappointed with the Locking Rings. They don’t look like some of the pictures and are very hard to read (have to catch the light just right). So an easy solution is to use “White Out” over all the recessed lettering, let dry and clean up using mineral spirits, now thats makes my job a little easier. The White Out is pretty tough ...

Read this review »


1 2 next »
13 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase