LumberJocks

Reviews: WORKSHARP WS3000

  • Advertise with us
WS3000 Wide Blade Attachment - Fixed!

WS3000 Wide Blade Attachment - Fixed!

07-20-2010 03:42 AM by BigJimAK | 17 comments »

I recently picked up a WorkSharp 3000 after trying my hand at tuning some bevel-up Veritas 3/16” thick A2 steel plane blades. The instructions say to attach the wide blade guide, leveling it with the sharpening sandpaper. Unfortunately, it won’t go down that far, because the inside of some of the supports squeeze against a raised piece of the machine. Sooo… I got out my Dremel and a carborundum cutting wheel and trimmed them back. I’ve attached a picture showing where ...

Read this review »


WORKSHARP WS3000 Great sharpner - I'm in love

WORKSHARP WS3000 Great sharpner - I'm in love

12-27-2011 09:47 PM by woodmaker | 32 comments »

I received the Work Sharp 3000 for Xmas. I absolutely love this thing. Dry sharpen, no water, no mess. I sharpened 5 chisels and one plane iron in about an hour (maybe less). The only reason I didn’t give it a 5th star is because I have one plane iron slightly over 2” and it doesn’t fit the ramp so I can’t sharpen it on the machine. I have to load the iron in a jig and sharpen from the top. The plane iron might be 2 1/8” at the most. I mean come on! I...

Read this review »


Ease of use

Ease of use

10-05-2010 05:33 AM by Dave | 25 comments »

I have been needing another method of sharpening other than by hand. I have been using a 3 and 6 inch grinder for shaping, and Arkansas stone’s for fine tuning. For plane blades, a large piece of glass with assorted grits of wet or dry sandpaper. I have made some jigs for the grinders to get somewhat of a hollow bevel started. And have had some reasonable success with the bevel. As long as I was not dealing with 2 inches or larger. But the stones and my inconsistency of sharpening have ...

Read this review »


So far, so good = Scary Sharp Chisels

So far, so good = Scary Sharp Chisels

01-08-2014 03:41 AM by kajunkraft | 13 comments »

Like many woodworkers I know, sharpening chisels is a hit-or-miss proposition, or you buy an expensive “system”. The Worksharp 3000 is about $200, which from what I have seen is a not too costly option. I am very much more a power tool woodworker than a hand tool woodworker. I rarely use chiselsso have not been too concerned about them. Recently have needed them and was really disappointed with the results and decided it was time to get them set up right. Although I’...

Read this review »


Worksharp 3000

Worksharp 3000

01-09-2018 04:43 AM by Jacksdad | 13 comments »

I got the Worksharp 3000 for Christmas and I’m really impressed. It comes with 2 glass plates and 120, 400, 1000, and 3600 grit sandpaper, plus 1 slotted wheel with matching sandpaper. Chisel and plane blades slide in from underneath, it’s as hard to sharpen as an electric pencil sharpener. You can also sharpen from the top or there’s a free hand way to sharpen from underneath. It’s a fast and easy way to sharpen, you can also sharpen carving tools, I highly recommen...

Read this review »


Aux Table for the WorkSharp 3000

Aux Table for the WorkSharp 3000

01-30-2018 12:24 PM by Dan Katz | 4 comments »

I couldn’t upload my pictures in the comment section so I’m trying here to post them.Here are a few photos of my set up for carving ad turning tools. I don’t use the turning set up often but for carving this is easy and will produce a very sharp edge starting at 240 if necessary all the way up to 1500.I have 3 wheels with 240-400-600-800-1000-1500

Read this review »


Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com