LumberJocks

Reviews: .

  • Advertise with us
K-Grip Siphon Spray Gun aka Critter Spray Gun

K-Grip Siphon Spray Gun aka Critter Spray Gun

12-19-2008 04:47 AM by Matt (Upper Cut) | 11 comments »

This is a review of the following http://www.rockler.com/product.cfm?page=17858&filter=critter%20spray I have had this for a while, and it was $40 when I bought it, it’s $50 now. I primarily use this for spraying interior latex paint on furniture. This gun has a bad rep, but I like it. Yes, it makes a cloud—wear lung protection. I mix the paint with water, pop it on the compressor, set it to 40psi (I have a little pancake compressor) and spray small projects. I ...

Read this review »


JacPac CO2 Compressor - Very Good

JacPac CO2 Compressor - Very Good

04-07-2009 08:57 PM by CharlieD | 13 comments »

Recently, I bought the JacPac CO2 portable compressor product and it sat in my shop for a couple of months before I used it. I like it a lot and will use it a lot… going forward. It is very handy when you have to do work outside a location where you have a compressor or one with no electricity. I took it to a house where I needed to finish up a small job. I took my Bostitch 15 gauge angle nailer and 18 gauge PC. I took the 18 guage because I thought it might not drive the 2 inch ...

Read this review »


A

A

12-04-2008 04:17 PM by Woodchuck1957 | 1 comment »

A

Read this review »


A

A

12-04-2008 01:47 AM by Woodchuck1957 | 6 comments »

A

Read this review »


The Soul of a Tree: A Master Woodworker's Reflections

The Soul of a Tree: A Master Woodworker's Reflections

07-05-2009 09:17 AM by Durnik150 | 3 comments »

Author: George Nakashima$31.68 as of this writing at Amazon Given the price of this book I feel strongly that you should know that this is not a woodcrafting book with plans and designs. This book, written by Nakashima himself, is a great overview of a great career and a wonderful talent. The first half of the book is especially enlightening. It is a short biography of Nakashima’s early years and shows how these experiences directly influenced his works. When I first saw the book I t...

Read this review »


Making Mechanical Marvels in Wood by Raymond Levy

Making Mechanical Marvels in Wood by Raymond Levy

11-16-2009 07:26 PM by Sivers | 8 comments »

I thought this book was really neat. I love mechanical “things”. All the models in this are meant to be demonstrative of basic mechanical devices that make up the larger machines that are all around us. Cam Follower, Couplings, Scotch Yoke etc…. I am hoping my finished models will be “desk worthy” as I am an engineer and the others in my office would get a kick out of this. I have built a simple one and am partially through one of the more challenging ones. Th...

Read this review »


IGAGING digital angle cube

IGAGING digital angle cube

01-19-2010 02:11 AM by cliffton | 8 comments »

I bought this from Rockler about a week ago, it was on sale for 10$ cheaper than the wixey, so i figured why not, if it sucks i can return it. So far I have to say this thing rocks.Pros:-has really strong magnets in it, wont slip at all off of a highly polished blade.-cheaper than wixey-has hold button for odd position angles-numbers auto flip when you turn it upside down to make it easier to read-takes a 9v battery-has magnets on 3 sides ( i dont know if the wixey does)-has machined metal b...

Read this review »


Lost Accuracy

Lost Accuracy

11-15-2011 05:13 PM by woodworksbyjohn | 20 comments »

I received this as a present last Christmas and thought things were good with it until now! I had my tablesaw blade set for some angled cuts and just re-squared the blade with the Angle Cube. I ripped pieces to make 8 cabinet doors and when I brought them to the shaper noticed they didn’t sit squarely on the fence! A try square showed them to be off by about 5-6 degrees. I double checked the tablesaw with the angle cube but according to it was right on. Hand planed a piece square, ...

Read this review »


Infiniter Laser guide

Infiniter Laser guide

01-19-2010 02:34 AM by cliffton | 5 comments »

This is an aftermarket laser guide that replaces the outer washer on your arbor. The packaging says that it will fit an arbor that is 7/16×5/8. the package says that it will not fit these 12” miter saws, Ridgid, pro-tech, makita ls1221, dewalt dw705s produced before 2005. It will not fit these circle saws: Porter cable quick-change , all worm drives and skil. I just put this on my GMC 10 inch sliding compound miter and i have to say it works pretty good. the laser is turned ...

Read this review »


The Workbench Design Book

The Workbench Design Book

08-20-2011 02:49 PM by mafe | 17 comments »

The Workbench Design BookBy: Christopher Schwartz ISBN-10: 1558708405 ISBN-13: 978-1558708402 This book is really a landmark in workbench books for me. The workbench design book is a book that takes you on a tour in workbenches; we get a little historical insight, some geographical insight and the chance to see what workbenches some of the top guides of the trade are using. My personal favorite are with no doubt the 21st-century Workbench, this bench is so rock solid and well tho...

Read this review »


« prev 1 2 3 4 5 6 ... 9 next »
81 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com