LumberJocks

Reviews: .

  • Advertise with us
The new dovetail saw by Roeland Brekelman from Brekelplanes

The new dovetail saw by Roeland Brekelman from Brekelplanes

06-29-2013 03:26 PM by rkoorman | 7 comments »

Today I finally got the chance to try out Roeland his new made dovetail-saw…..What an amazing piece !!! Besides custom-made planes Roeland also builds saw and other tools. This saw is build totally by hand. This saw is priced at 120 euro’s…I think that is great value for money. You can find his planes on facebook ” Brekelplanes “

Read this review »


Excellent budget-friendly compressor for brad nailing and tire inflation

Excellent budget-friendly compressor for brad nailing and tire inflation

05-08-2014 03:32 AM by ikillbugs | 7 comments »

Recently I was heading to a big box store to pick up a Porter-Cable 6-gal air compressor but stopped into a local pawn shop first to see what they had to offer. I walked out with this cute little compressor for $25 (it is only $69 new at Home Depot or Amazon, with accessories). I figured it’ll be a nice starter compressor to run a cheap HFT brad nailer, and the price could not be beat. I could upgrade later if need be. Since I have no immediate plans to buy a framing nailer or spraye...

Read this review »


A

A

12-04-2008 01:47 AM by Woodchuck1957 | 6 comments »

A

Read this review »


If you sell, you should really take a look at this book

If you sell, you should really take a look at this book

07-05-2009 08:53 AM by Durnik150 | 6 comments »

I have accrued a lot of woodworking books over the last 3 years or so and avidly read as much as I can about my favorite hobby. I occasionally sell some pieces so got hold of this book. This book is available at Amazon for $15.63 as of this writing. The author is Dan Ramsay. First off, not everyone needs this book. If you enjoy woodworking for the relaxation, the craft, or as gifts, you don’t need this book. If you are actually trying to make a profit or are seriously considering ...

Read this review »


Finishing, It's not over till it's over by Marc Spagnuolo.

Finishing, It's not over till it's over by Marc Spagnuolo.

06-27-2011 02:02 AM by degoose | 6 comments »

Received my copy of the new WoodWhisperer book, Finishing, It ain't over till it's over... by Marc Spagnuolo.. A no nonsense approach to a very important part of any project… the finishing… Marc takes a subject many of us cringe about and shows us, in his inimitable style, how to make the most of various finishing techniques… from the initial preparation to the final buff… This book does not bog us down with technical jargon and formulas but gives us a c...

Read this review »


Pretty much what I was looking for.

Pretty much what I was looking for.

04-17-2013 03:18 AM by muleskinner | 6 comments »

I wanted to add a foot switch to a scroll saw I just bought. The pedal types seemed better suited to a sitting position (I was thinking sewing machine). I will be standing so I looked for a low profile that had the pivot at the top. I ordered this one ($16.84) and received it yesterday. It’s available in three configurations: switch w/6ft pigtail; switch w/6ft cord and piggyback 15amp/120v plug; switch alone. I ordered the last option because I wanted a little bit longer cord and ...

Read this review »


Paste Wax (Car Wax)

Paste Wax (Car Wax)

08-22-2016 01:26 PM by PPK | 6 comments »

I thought about blogging this, but didn’t know if that was the right spot to put it. Here’s my shameless plug for using paste wax/car wax for woodworking! I am not particular to one brand over another. They all work quite well. The main thing that makes them good is the carnauba wax. This is a really tough wax that stays in place for a long(er) amount of time. I use car wax on my steel surfaces, such as my tablesaw, jointer, bandsaw, etc. This protects them from rust, and...

Read this review »


Entertaining, occasional rambling,  sometimes Jay is hard to hear

Entertaining, occasional rambling, sometimes Jay is hard to hear

10-04-2016 09:31 PM by Rick M | 6 comments »

I thought I would review some woodworking (and related) podcasts. I often prefer podcasts over music while in the shop or on drives. This is my 3rd woodworking related podcast. [A note about the rating … There is no reason this isn’t a 4 or 5 star podcast depending on the criteria. Since the name is, The Woodworking Podcast, I feel obligated to review it as such and relative to the 360 or Shop Talk podcasts which have stronger woodworking content and standalone. Some of you wi...

Read this review »


Infiniter Laser guide

Infiniter Laser guide

01-19-2010 02:34 AM by cliffton | 5 comments »

This is an aftermarket laser guide that replaces the outer washer on your arbor. The packaging says that it will fit an arbor that is 7/16×5/8. the package says that it will not fit these 12” miter saws, Ridgid, pro-tech, makita ls1221, dewalt dw705s produced before 2005. It will not fit these circle saws: Porter cable quick-change , all worm drives and skil. I just put this on my GMC 10 inch sliding compound miter and i have to say it works pretty good. the laser is turned ...

Read this review »


Sand Devil

Sand Devil

11-11-2010 02:05 AM by bluejazz | 5 comments »

I hate sanding. Among woodworkers of course, that about is as unique an impression as ‘Hitler was a bad guy’. This tool truly does make sanding easier. First off, cutting sandpaper and getting it into my 3M sanding block was a major pain. I’m sure there are better choices than 3M in sanding blocks and making your own is an option. But this Sand Devil has been a huge improvement for me. First off even with my Sandpaper cutting jig, cutting to size is burdensome if ...

Read this review »


« prev 1 ... 3 4 5 6 7 8 9 next »
81 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com