LumberJocks

Reviews: Makita

  • Advertise with us
Makita MLT 100 not much good about it

Makita MLT 100 not much good about it

01-13-2012 04:06 PM by anobium | 18 comments »

The Makita MLT 100 is the smaller sister of the 2705. Here are the specs Makita provides. Main table 610×590 mm with Sub table 760×790 mm Bore mm 30 mm (1 ¼ inch) Depth of Cut @ 90° 93 mm (3 ¾ inch) Blade Diameter 260 mm (10 inch) Depth of Cut @ 45º 64 mm No load speed 4500 rpm Net weight 38 kg (80 lbs) Wattage 1500 w Voltage 220 V 50/60 Hz Price: 410€ – 720€ (530$ – 950$) E...

Read this review »


Makita LS1016L Sliding Mitersaw

Makita LS1016L Sliding Mitersaw

04-18-2010 04:00 PM by Cato | 21 comments »

I bought this saw a few months back because I needed better accuracy than my old RAS could deliver consistently. I did a bit of research comparing models, prices, sizes, and I liked the feel and action of this saw the best, as I didn’t really want or need a 12 inch miter saw if I could get one in the 10 inch range that could cut a dimensional 4×4 if need be. After using it for crosscuts, bevels and miters over the past few months I can say that I am really happy with my p...

Read this review »


Makita RP2301FC 3-1/4 HP Plunge Router (Variable Speed)

Makita RP2301FC 3-1/4 HP Plunge Router (Variable Speed)

12-04-2010 05:07 AM by lashing | 12 comments »

I just got this router. So I’ll likely update info as I get more familiar. I noticed there are not many reviews for this new model from Makita so we need one on LJ. Amazon offered a really low sale price on this for Black Friday. It was $100 less than the sale price here in Canada. Being 10 minutes from Detroit, I had it shipped there and even got free shipping from Amazon. To my horror, Amazon didn’t pack it. They shipped the router in its own box – unsealed. I guess UPS took ...

Read this review »


Makita MAC700 2 HP Air Compressor

Makita MAC700 2 HP Air Compressor

04-16-2011 12:43 PM by phtools | 10 comments »

First of all, this is a good product overall. If you are going to buy one, or just have, you might benefit from the following setup tips: 1. The oil filler cap is a single piece, consisting of the cap and attached tube. It may look like you can separate the cap from the tube, but don’t bother to try. Simply screw the whole piece into the threaded oil filler opening. No need to tighten too hard. Finger tight plus a bit more will be more than sufficient. You will not need to remove thi...

Read this review »


Makita LS1214F 12-Inch Dual Bevel Sliding Compound Miter Saw

Makita LS1214F 12-Inch Dual Bevel Sliding Compound Miter Saw

01-24-2009 04:57 AM by ND2ELK | 13 comments »

I just bought this Makita 12” sliding miter saw and cannot say enough good about this saw. I went to Acme Tool an hour and a half away in Cedar Rapids so I could play with the Makita, Bosch and Dewalt miter saws. I felt the Makita had the smoothest slides of all three and liked the way the slides are on the bottom of the saw. There was no movment whatsoever and it just seemed like the best quality saw. It was right on the nuts out of the box and I cut all my trim for the shop with it. I would...

Read this review »


Makita MAC2400 Oiled Twin Hot Dog Compressor

Makita MAC2400 Oiled Twin Hot Dog Compressor

07-14-2009 08:34 AM by ND2ELK | 13 comments »

My lovely wife posted this tool review in one of my blogs by mistake. I wasn’t about to complain about it at that time. One thing I have learned over the years is, if MaMa does something nice for you, Never complain! Now that it has been awhile I thought I should post it in the tool review section. After doing a lot of reserch and looking at different compressors, I settled on this Makita. It is by far the most unbelievably quit compressor I have ever heard. Because my shop is small,...

Read this review »


Makita MAC5200 3 HP Air compressor

Makita MAC5200 3 HP Air compressor

04-16-2011 01:02 PM by phtools | 7 comments »

I purchased this compressor as a replacement for a 26Gal 5HP husky I had. There was nothing wrong with the Husky it was simply that my space could not accommodate it. I intended to use this as a homeowner who always has a project and as someone who uses compressed air for multiple purposes. I did alot of research and narrowed it down to either the MAC5200 or the DeWalt D55146. I decided on the Makita because of the lower price and the oil lubricated pump. The reason oil lubrication was import...

Read this review »


Makita LS1013F 10-inch Compound Sliding Miter Saw Review

Makita LS1013F 10-inch Compound Sliding Miter Saw Review

07-18-2008 03:34 PM by Timber4fun | 8 comments »

Introduction – Over the last 14+ years, I’ve been using a 10-inch Craftsman Compound Miter Saw. It has served me well. In conjunction with the Craftsman Miter Saw, I had purchased a used Craftsman Radial Arm Saw. Unfortunately the Radial Arm saw had a wobble to it. It was not very accurate. I am guessing the previous owner damaged the saw mechanics. Since that time the sliding miter saw has emerged as a viable tool to replace the regular miter saw and the radial arm saw. With limited w...

Read this review »


Makita, #1 in my book

Makita, #1 in my book

07-05-2009 02:10 AM by JMG | 17 comments »

I was a cutman on a framing crew for about 7 years and I have used just about every major brand circular saw out there and the only thing that comes close to a magesium Makita saw is a regular Makita saw. No, I don’t work for Makita but this saw is the absolute best. At only 10 lbs, this bas boy has a powerful 15 amp motor that cuts anything in it’s path. This saw is capable of miter cuts 90 to 56 degrees with the flip of a lever. Remember those times trying to finish a job at...

Read this review »


Makita 4351FCT Whatajigsaw!!

Makita 4351FCT Whatajigsaw!!

04-05-2009 10:28 PM by matt garcia | 12 comments »

I know there are a lot of Bosch lovers out there, but I took a chance on this jigsaw and man did it pay off! The website indicated it was 40% less vibration than other brands. When I received it, and chucked up one of the new Starrett Dual-Cut blades and turned it on, you could barely feel any vibration. What a huge improvement over the POS Craftsman jigsaw I received as a gift a few years ago. This saw, in unison with the new Starrett blade yielded splinter free cuts on 3/4” oak ...

Read this review »


1 2 3 4 5 next »
47 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase