LumberJocks

Reviews: Kreg

  • Advertise with us
Does what it is designed to do

Does what it is designed to do

07-16-2014 03:35 AM by JSB | 11 comments »

Recently Kreg contacted me and asked if it would be ok to send me one of their new Foreman machines to mess around with. They did not ask for a review or ask for me to return it. I’ve been messing around with it for about a month now and can’t find any flaws or problems with the machine so I will give it a 5 star rating. It is obviously much faster than using one of their clamp down jigs. Even without dust collection the chip management is nice. I think this is geared toward so...

Read this review »


Kreg Multi-Mark adjustable square

Kreg Multi-Mark adjustable square

08-29-2010 02:32 AM by Kerry Drake | 17 comments »

My wife actually grabbed this off of the shelf at the Big Blue Box Store while I was searching for a box of pocket hole screws. The body is the blue plastic that Kreg loves so much, and the 6” rule is of decent thickness. I have been using this for the past couple days and I really do kind of like it. If it had a 12” rule instead of a 6” rule I might have given this 5 stars instead of just 4.

Read this review »


Simple and Inexpensive

Simple and Inexpensive

11-03-2009 07:23 AM by Jimi_C | 15 comments »

I’ve been looking at getting a Kreg pocket hole jig for a while now, with it basically being a toss up between the R3 Jr. and the extremely simple mini jig kit. I wasn’t really looking at the K4 or higher systems, since they go up in price pretty quickly, and as always I’m working on a budget. In addition, I always planned to get the face clamps, so the extra clamping capabilities of the more expensive systems seemed unnecessary for my level of work. I bought the small fac...

Read this review »


Great quality and customer service so far....

Great quality and customer service so far....

03-12-2012 02:56 PM by willy66 | 2 comments »

At the woodworking show in NJ a couple weeks ago I bought the show promo kit which included the large table, steel stand, fence, micro adjuster, caster, switch, two feather-boards, and a flip-stop. It totaled $593.85. It was back-ordered when they sold to me, but they actually got it to me much faster then they had hoped (which was a nice surprise). Finally had a chance to start putting it together, so wanted to post some feedback, for anyone who is interested in possibly getting one. Righ...

Read this review »


Kreg True flex featherboard.

Kreg True flex featherboard.

12-25-2012 09:06 PM by AJswoodshop | 11 comments »

For Christmas I asked for a featherboard. Before I got the featherboard I was using two pushsticks. One to hold the workpiece against the fence, and the other to push it through the saw. It worked well but it was a little uncomfortable. The Kreg true flex featherboard fixed all of those problems. The fingers on the featherboard push the workpiece tight against the fence, and it can adjust to fit the width of you workpiece. It can fit almost every T-slot, and runner track. It’s great for...

Read this review »


The plate is flat (for now), but the twist lock rings aren't

The plate is flat (for now), but the twist lock rings aren't

01-14-2014 03:48 AM by jakep_82 | 9 comments »

I bought the 3-1/4 HP Triton router at a woodworking show a couple months ago. It included this plate and I decided to buy the additional insert rings at the same time. I finally finished building my router table and when I started using it I quickly realized it wasn’t flat. I could feel the part dipping in the middle as I ran them through the router. This was confirmed by the curved cuts that it produced. I pulled the plate and checked the inserts with a feeler gauge. The blank i...

Read this review »


Kreg Pocket hole jig Jr.

Kreg Pocket hole jig Jr.

12-26-2012 01:58 PM by AJswoodshop | 15 comments »

I’ve been using this Kreg jig Jr. for over a year now, and it’s well worth the money. It works great and I’m very happy with it. Only a few issues but the price is great! Positives--Includes drill bit, drill bit stop, a driver bit for square head screws, square head screws, plugs, the manual, the case, and the jig. All of these things work great.-It’s small size can fit in tight areas. Negatives--It’s hard to keep the jig from sliding around, you have to cl...

Read this review »


Pocket Hole screws By Hillman sold at Lowes

Pocket Hole screws By Hillman sold at Lowes

01-02-2013 10:12 PM by gbrown4 | 9 comments »

I notice last time I was at Lowes that they started carrying Pocket hole screws by Hillman. Ialso notice that they did not carry the pan head style. It was my understanding that you need pan head if you wanted to cover the screw with a plug. Everytime I use the washer head it sticks up out of the hole. Am i correct?

Read this review »


Kreg's new AutoMaxx 6" Bench Klamps

Kreg's new AutoMaxx 6" Bench Klamps

09-18-2014 03:47 AM by timbertailor | 8 comments »

If you are already a proud owner of an assembly table with some type of extruded aluminium track solution, then keep reading. I recently decided to build an assembly table and was looking for some new clamps to accompany my table. I found a product presentation on YouTube and decided to give them a try. First, they are very powerful. The first thing I had to do once I had them installed on the table using a dual purpose track (1 3/4” x 1/2”) was to turn down the clamping for...

Read this review »


I can't believe these are 8 bucks

I can't believe these are 8 bucks

06-10-2013 08:57 PM by lumberjoe | 18 comments »

I didn’t feel like making my own bench dogs, I also didn’t feel like paying tons of money for them. In one of my many recent trips to woodcraft, I saw these and decided to try them out The Good They work. They fit snugly in the 3/4” holes I drilled and laid flat on the bench top. They are nylon, but appear to be very strong. I clamped down on my vise way more than I needed to a few times to see if they would crack or give. They didn’t. The flat faces are just the...

Read this review »


« prev 1 2 3 4 next »
40 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com