LumberJocks

Reviews: Woodcraft

  • Advertise with us
My first attempt at building from plans....

My first attempt at building from plans....

1164 days ago by RONFINCH | 10 comments »

It’s a little scary stepping up your projects in size and difficulties. Since I normally am totally lost when looking at most plans, I thought this would be a good project to start with. I wanted to build this chair out of Cypress, however, my local wood store was out of premium Cypress and convinced me to use Spanish Cedar instead….... won’t do that again. I figured I might could stretch 45 board feet into 2 chairs. So, ordering 45 board feet I was charged for 62 board feet...

Read this review »


Cabinet scraper

Cabinet scraper

1359 days ago by ducky911 | 13 comments »

Hi, I thought I would post this as there may be some others that have not tried using scrapers. Oh man if I only hand the hours back spent on sanding. My wife been bugging me for a bedroom mirror and since I been buying tools lately I figured that her project better move up on the list. I had some hard maple left over. I ran the frame material through the table saw on an angle to make a cove—-I had done that several times before and it takes alot of sanding and making special b...

Read this review »


new clamp purchase

new clamp purchase

1483 days ago by woodsmithshop | 15 comments »

I just purchased six of the Woodcraft clamping system clamps, they were on sale, plus if you bought $100 or more the shipping was free, I have been having trouble keeping any panels flat on glue ups, this system does a great job, though not totally perfect, you can get near and sometimes perfect if you are careful, and your 2×2 are made very square. you must plan ahead carefully when doing a glue up, otherwise it can be awkward trying to get your boards aligned, it is best to not add th...

Read this review »


Flatten your stones frequently

Flatten your stones frequently

1653 days ago by gizmodyne | 6 comments »

We bought this three months ago on sale at Woodcraft. They go for $32 U.S. Purpose: A flat reference surface to lap your water stones upon. Water stones sharpen quickly but wear quickly too. Therefore they need to flattened frequently, especially if you are sharpening a thick iron. At 2” the surface plate is thick enough to avoid deflecting under pressure. To use: Soak wet-dry sandpaper (I like 100 grit), press it down. Lap away. You can also sharpen tools directly on the sandpape...

Read this review »


Smoothes air flow. HUGE improvement for dust collection on smaller machines.

Smoothes air flow. HUGE improvement for dust collection on smaller machines.

1670 days ago by dbhost | 11 comments »

To be blunt, I have never been truly happy with the dust collection on my Ryobi AP1301 13” planer. I mean it works and all, but it’s never worked well. Pulling from a shop vac fitted with a separator and a LOT of hose, I have always felt that the ribbed hose robbed me of too much air flow to be truly effective… I have used the square edge DC fittings the ones that step down at an almost 90 degree angle like the ones I got from Rockler, and was never pleased with the resul...

Read this review »


EZ squeeze dust collection hose clamps

EZ squeeze dust collection hose clamps

1681 days ago by hairy | 1 comment »

Why didn’t I think of this? It’s too easy. I have to move my dust hose around a lot, and these work for me. They actually have a pretty good grip, but they won’t make your arms look Popeye. Unpacking and assembly is pretty straightforward, although there are no instructions . At 2 for $6, it’s a good deal. http://www.woodcraft.com/Product/2080307/28347/2-piece-Double-Loop-Squeeze-Hose-Clamp-for-4-Dust-Collection-Hose.aspx

Read this review »


Nice Tenoning jig, but....

Nice Tenoning jig, but....

1719 days ago by drfixit | 11 comments »

I had to modify it, by drilling new holes for the miter bar to use it on my Ridgid TS3612 saw. It has 2 sets of holes in it, but one set put it on top of my blade and the other set put it too far away. It was very easy to assemble other than this but after assembling it and adjusting it. It has 3 adjustable screws to fit your miter slot. It can be used for any angled tenon from 0 to 45 degrees. Wish I had bought one sooner.

Read this review »


Gotta love reusable glue spreaders.

Gotta love reusable glue spreaders.

1721 days ago by drfixit | 9 comments »

This is going to be my first review here at LJs and hope some one finds it of use. I normally use the cheap little shop brushes for spreading glue in joints and on tenons and such. I went by the local WoodCraft the other day to pick some up and came across these polypropylene glue spreaders. There is 6 in a pack and at $3.50 I figured it would be worth a shot. Love em! I use a lot of Tight Bond glue, after using one the other night while glueing up a clock case, I simply let it dry over n...

Read this review »


Great for uneven floors

Great for uneven floors

1733 days ago by DannyBoy | 8 comments »

From the start, I needed to make sure that my saw would be movable. With a small shop, floor space is at a premium and it only makes things difficult to admit that my floor is not at all level and even. This system took care of both of those needs. The casters are well built and work well on the uneven floor. Plus, once you are done moving the unit, you flip it down onto it’s own feet right into your floors sweet-spot. Two bits of advice: First, you probably won’t matc...

Read this review »


Yardstick style measuring compass

Yardstick style measuring compass

1771 days ago by Bob #2 | 12 comments »

I saw this item during a small ordering spree with woodcraft and added it to my order givng it little thought as it was quite simple and what could go wrong? First thing is it was back ordered and shipped separately at a later date.That would be fine if I had been advised but there was nothing mentioned on the invoice so I assumed it had been overlooked and proceeded to buy another one locally ( different style but same application.) When this one arrived I at first tried it on the y...

Read this review »


« prev 1 2 3 next »
25 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase