LumberJocks

Reviews: Woodcraft

  • Advertise with us
Do not have high expectations!

Do not have high expectations!

10-28-2011 02:04 PM by slickSqueegie | 38 comments »

I bought it, I guess it works but I am not happy with it. I still would rather “freehand” my blades! What do I expect for 13 bucks? Call me picky if ya want. When sharpening, I expect nothing less than perfection! And this little unit is far from it!

Read this review »


uhh, am i being punk'd

uhh, am i being punk'd

11-09-2014 03:52 PM by soapmaker | 19 comments »

I’m sure the boo-birds will come out and say this shouldn’t be here or it isn’t fair, blah, blah but WTH? I thought woodcraft was, from their mouth, Who is Woodcraft? Since 1928, woodworkers have trusted Woodcraft to deliver quality woodworking tools, supplies and service. With more than 20,000 tools and supplies, backed by our 90-Day Guarantee, hobbyists and professionals rely on Woodcraft to help them create stunning works of art. We believe that offering quality p...

Read this review »


Wonderful Customer Service Experience

Wonderful Customer Service Experience

05-15-2015 09:25 PM by Lenny | 17 comments »

This is just to share a positive customer service experience. I know these days good customer service is often hit or miss. That said, I purchased the shop stool pictured above, over 2 years ago. Recently, while reaching down to pick something up, while still seated, I caused the seat to crack. The chair is rated for about 330 lbs. and while I am well below that weight, I was putting a lot of stress on an edge of the seat as I reached down. I called Woodcraft with the intention of simp...

Read this review »


new clamp purchase

new clamp purchase

06-20-2010 06:32 PM by woodsmithshop | 16 comments »

I just purchased six of the Woodcraft clamping system clamps, they were on sale, plus if you bought $100 or more the shipping was free, I have been having trouble keeping any panels flat on glue ups, this system does a great job, though not totally perfect, you can get near and sometimes perfect if you are careful, and your 2×2 are made very square. you must plan ahead carefully when doing a glue up, otherwise it can be awkward trying to get your boards aligned, it is best to not add th...

Read this review »


Review of the Woodcraft Anti Kickback Safety Rollers

Review of the Woodcraft Anti Kickback Safety Rollers

02-11-2014 01:33 PM by steve_in_ohio | 16 comments »

I bought these rollers a couple of days ago because my table saw is old and it doesn’t have a riving knife and I don’t like to use the blade guard. Also I had problems when running long boards thru the table saw that they would try to move away from the fence, so I bought these rollers. I mounted these on my fence with a t-track instead of the rail that it is sold for these. After some simple assembly I started using these and I love them. They hold the wood down to the table and ...

Read this review »


Cheap Woodcraft Wheel Marking Gauge--It works!

Cheap Woodcraft Wheel Marking Gauge--It works!

04-08-2015 05:02 PM by CharlesA | 16 comments »

Since I have been on my quest to learn to hand cut dovetails, I have been giving my marking gauge a workout. I have been using a Crown Rosewood cutting gauge, and I have been frustrated by my inability to make an absolutely straight clean line every time. I sharpened the knife on it and still would end with a wobble here and there. I thought that the combination of the cutting knife and the very short fence was the culprit: I checked reviews and was about to pull the trigger on a Ham...

Read this review »


Woodcraft Dust Collector Remote Control

Woodcraft Dust Collector Remote Control

07-15-2011 05:47 AM by newTim | 14 comments »

I’ve seen these things in the local Woodcraft for many months and finally bought one when it recently went on sale. Many folks have been ‘hotrod-ding’ their dust collectors, especially the Harbor Freight. I’m happy to report this is working great. Just plug it in to the wall and plug the collector in to it. The HF is supposed to be a 2HP motor, but it is still 110V, so I was reluctant to buy this thinking it would be overpowered. Not true. I wish I had bought thi...

Read this review »


Cabinet scraper

Cabinet scraper

10-22-2010 06:16 PM by ducky911 | 13 comments »

Hi, I thought I would post this as there may be some others that have not tried using scrapers. Oh man if I only hand the hours back spent on sanding. My wife been bugging me for a bedroom mirror and since I been buying tools lately I figured that her project better move up on the list. I had some hard maple left over. I ran the frame material through the table saw on an angle to make a cove—-I had done that several times before and it takes alot of sanding and making special b...

Read this review »


Yardstick style measuring compass

Yardstick style measuring compass

09-05-2009 06:26 PM by Bob #2 | 12 comments »

I saw this item during a small ordering spree with woodcraft and added it to my order givng it little thought as it was quite simple and what could go wrong? First thing is it was back ordered and shipped separately at a later date.That would be fine if I had been advised but there was nothing mentioned on the invoice so I assumed it had been overlooked and proceeded to buy another one locally ( different style but same application.) When this one arrived I at first tried it on the y...

Read this review »


Woodcraft the best Customer Service and support for Wood River Planes

Woodcraft the best Customer Service and support for Wood River Planes

06-20-2012 11:28 AM by bloqbeta | 12 comments »

I bought my first plane, a Wood River No. 4 Plane and had it shipped to my sister in Florida, who brought it down to Guatemala where I live, that took almost 2 months. I received it yesterday and prepared it for the bench, cleaned all the gunk, honed the blade perfectly, razor sharp with an imperceptible camber. Grabbed a beautiful plank of highly figured mahogany and started planing the face of the board, and to my surprise, it left a very deep indentation. They were not plane track but...

Read this review »


1 2 3 4 next »
33 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com