LumberJocks

Reviews: JET

  • Advertise with us
Jet Speed Clamps with Slip Clutch and 4" Throat

Jet Speed Clamps with Slip Clutch and 4" Throat

09-12-2011 08:34 PM by pintodeluxe | 1 comment »

These clamps were needed to reach over my pipe clamps during complicated glueups. The long 4” throat can accomplish this easily. The handle is large enough in diameter for good clamping pressure, and they easily closed all of my mortise and tenon joints with no gap. Cons: The clamp pads fall off easily. This is easily solved with a dab of silicone caulking. The slip clutch occasionally slips when you don’t want it to. I usually prefer clamps with a trigger for ju...

Read this review »


Used Jet JJ-6CS jointer, seems to be a bargain

Used Jet JJ-6CS jointer, seems to be a bargain

02-22-2011 05:17 AM by ic3ss | 9 comments »

I picked this up from a Craigslist ad recently for $200. SCORE!! I wanted the CSX with 1 hp motor, but this one will do. And with this being about half the going price for a newer CSX, I can put that money towards some chisels or a shoulder plane. Looks like it’s seen some action, I had to clean a bunch of surface rust from the fence and tables. A thorough cleaning did wonders, and now I need to pull the knives and get them sharpened. Everything seems to work fine, even the bearings are...

Read this review »


Review of Jet 10" Jointer-Planer Combination Machine

Review of Jet 10" Jointer-Planer Combination Machine

01-31-2011 08:23 PM by Furnitude | 2 comments »

I removed my review because after using this machine, I can’t say that it is even decent quality. I no longer recommend it. I didn’t want people to buy it on my recommendation.Mitch

Read this review »


JET JJP-12HH, 2-month review

JET JJP-12HH, 2-month review

01-21-2011 11:33 PM by mstenner | 17 comments »

After two months with the JJP-12HH, I’m ready to share what I’ve learned. The bottom line: this is a great tool and I’d recommend it for the serious amateur. I wanted a lot of capability in my small (12×15) shop and am very happy. Shipping & Unpacking This is a large and heavy tool (my wife says I’m no longer the “biggest tool in the shop”), and it comes almost fully assembled. You will need to get the crate where it’s going intact. ...

Read this review »


This sander gets the job done!

This sander gets the job done!

11-07-2010 12:53 AM by RONFINCH | 14 comments »

Apprehensive at first spending so much on a sander, my fears we relieved after the first board was run through. The packaging was excellent, isn’t styrofoam wonderful? The base was easy to assemble with good instructions (pictures) provided. Be advised, get some help to lift the sanding machine on the stand!!!! It is heavy !!!! The in-feed table was easy to install, along with the optional extensions. Tracking was perfect after loosening the shipping tension right out of the box. So far...

Read this review »


Jet bandsaw motor replacement

Jet bandsaw motor replacement

11-05-2010 03:34 AM by kayakguy | 11 comments »

This is not so much a review of my bandsaw, as a discussion of issues I had with the motor, and the struggle I went through replacing it. I had origionally posted this under ‘projects’, but some folks had suggested it really belonged under ‘reviews’. So here it is. While re-sawing some 10” wide Walnut boards, I managed to blow out the motor on my bandsaw. The local repair shop could not fix it (they claimed it was a cheap motor, and not repairable). Jet wanted almos...

Read this review »


Great Idea but Poor Design

Great Idea but Poor Design

10-13-2010 05:29 AM by jmichaeldesign | 12 comments »

I read reviews on this machine on multiple sites before I decided to purchase and came to the conclusion that it would serve me well. I had what I thought to be realistic expectations from this machine. I had expected a machine that would work well for boards up to 5, maybe 6 feet long. I expected it to be under powered, but usable. Many reviews spoke of the difficulty of getting the jointer tables coplanar. I planned on setting the jointer to take a 1/16” cut and leave it there all the...

Read this review »


Yes, I did need a drum sander

Yes, I did need a drum sander

09-06-2010 07:28 AM by Ben | 18 comments »

Overview When I run across a list of must-have tools in the woodworking magazines, a drum sander is never mentioned. I hemmed and hawed about whether or not I needed one for my growing hobby. I finally bought the Jet 16-32 last December and I am more satisfied with my purchase every day. A few things that were a little bothersome This machine can be slow. I am accustomed to my planer hogging off large chunks of wood in a couple of minutes. This tool is not meant to replace a plane...

Read this review »


Jet 708480K JPS-30 Quality Hybrid Saw for under $800

Jet 708480K JPS-30 Quality Hybrid Saw for under $800

07-30-2010 08:04 PM by Holz_und_Geschichte41 | 6 comments »

Jet 708480K JPS-30: 10-Inch ProShop Table saw 1-3/4-Horsepower 30-Inch Rip fence With Steel Wings I have been woodworking for about 2 years now and felt it was time to spend the necessary dough to improve accuracy, cuts, rips, and broaden techniques. I spent a lot of time researching table saws based off cost, features, etc. I decided on this Jet for a handful of reasons: •Cost: $799.00 through Amazon: Amazon allows you to finance certain large ticket items for 12 months same as cash....

Read this review »


JET 6-inch riser kit for 14 inch bandsaw

JET 6-inch riser kit for 14 inch bandsaw

07-07-2010 02:34 AM by MOJOE | 15 comments »

So I installed this kit today on my JWBS-14DX. It was very straightforward and took about 30 minutes by myself. I must confess that I watched a quick vid on youtube, and ditched the instructions. I did look through them afterwards that they seemed alright. Anyway, the fit and finish on this kit is pretty good, and everything went together smoothly. My only complaint…..the powder coating on the riser block was not quite as nice as the powder coating on the saw, but, that really isn&...

Read this review »


« prev 1 2 3 4 5 6 ... 8 next »
77 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase