LumberJocks

Reviews: JET

  • Advertise with us
Jet Cabinet Saw

Jet Cabinet Saw

05-09-2012 11:13 AM by Cato | 13 comments »

I bought this table saw in March and I thought I would review it here as you have to do some digging to find reviews on this saw. The only other I found on this site was by Walnutz, a few months back. I have a blog with pics on the arrival condition and assembly on the saw so I won’t go into detail on that except to say that the saw arrived in absolutely perfect condition neatly on a pallet and shrink wrapped. This is my first true cabinet saw but in my research of and looking at the ma...

Read this review »


Review: JET Hybrid Table Saw JPS-10

Review: JET Hybrid Table Saw JPS-10

04-30-2012 08:36 PM by Rb12 | 16 comments »

This is my first tool review and I know it is not something new to the market, but still sold so, I figured I would throw it out there for others. Recently bought a JET Hybrid Table Saw JPS-10 . Up until now I had my dad’s hand-me-down, 30-year-old Delta/Rockwell, 1-hp Model 9 Contractor Saw. The fence was horrible, it had metal lattice work wings (finger catchers), a bearing had gone in the motor and it was loud as hell (forget the dime test, it couldn’t pass the push stick test… where ...

Read this review »


Wow,  wish I would have bought one sooner.

Wow, wish I would have bought one sooner.

03-12-2012 01:41 AM by Chris | 21 comments »

I finally broke down and purchased a drum sander while Jet was having a 15% off sale. After reading the reviews here and elsewhere I decided to go with the 16-32. I had zero issues with tracking on the belt and leveling the drum was pretty straight forward. I spent about 2 hours setting it up and testing it out. I added a set of locking casters to make it mobile. I usually spend a couple of hours leveling a glue up by hand when making cutting boards. This sander has saved me around 8hrs o...

Read this review »


Another Jet 10" jointer/planer combo review

Another Jet 10" jointer/planer combo review

02-08-2012 12:35 AM by Eric | 7 comments »

Having a large hunk of white oak cut up roughly (chainsaw!) and dried, and beaten up by taking a good hour on one piece jointing with hand planes, I finally took the plunge with the Jet 10” combo. I have a small non-garage shop, so both space and charge card were important! Since others have reviewed the machine here and on other sites, I just want to add my thoughts if you are considering the purchase.First, as others have said, set up is a snap, tables well-enough co-planer out of t...

Read this review »


Jet 3HP Cabinet Saw with 30" Rip

Jet 3HP Cabinet Saw with 30" Rip

01-21-2012 04:33 PM by Walnutz | 9 comments »

There is a summary below if you don’t want to read this rather long review. Purchase and Delivery:I’ve had this saw a little over a year now and thought it would be a good point to review it. I decided on this saw after looking at countless reviews and considering price and overall weight.I purchased it from my local Woodcraft store. The owner of the store delivered it to my garage for a small fee. At first I was a little concerned that the packaging looked to be rather flimsy. It ha...

Read this review »


Great upgrade from my old DP

Great upgrade from my old DP

01-02-2012 08:00 PM by Chris | 3 comments »

I have owned this drill press for about a year and everything was spot on right out of the box. The laser was perfectly aligned and I love the work light. The over sized table is great for woodworking especially as compared to the normal DP’s intended for metal working. It also appears to have plenty of power for my needs. All was going well until 2 days before this past Christmas when the motor would not start nor the work light or laser turn on. I was leaving town for a few days a...

Read this review »


Review ToolSelect.com  part #3  Jet Edge Sander

Review ToolSelect.com part #3 Jet Edge Sander

12-08-2011 02:03 PM by Kjuly | 9 comments »

Part 2 concluded with links to two videos produced by ToolSelect.com. The reviews, Jet Drill Press -JDP-12 and the Jet Mortiser-JBM-5 were published shortly before I wrote part 1 & 2. The third tool review video, Jet Oscillating Edge Sander-JET 708447 OES-80CS, was not published at that time. I found three issues with the operation of the edge sander. We, ToolSelect.com and I, felt it would be fair to share my findings with Jet and give them the opportunity to respond. Jet was ...

Read this review »


Craiglist Drum Sander find

Craiglist Drum Sander find

12-04-2011 08:18 AM by ichbinpete | 18 comments »

I have been on the lookout for a deal on a drum sander for quite some time. Of course a good deal to me has to be an amazing deal to the wife. Using Craiglist RSS feeds is about the best way to stay up on things and find a good deal, btw. Anyways, I found a listing for a Jet 16-32 drum sander listed for an amazing $300. I immediately called the number and asked what was wrong with it. When the seller said nothing and that it was only about 6 months old with about 1 hour of usage I asked ...

Read this review »


Jet Tools / ToolSelect.com review

Jet Tools / ToolSelect.com review

11-05-2011 03:00 PM by Kjuly | 6 comments »

This is a three part review.The first part is my experiences making the tool review video followed by two videos produced by ToolSelect.comKeith ToolSelect.com review… part 1Who or what is ToolSelect.com? Here is a quote from ToolSelect.com’s website: “ToolSelect.com is an unbiased power tool comparison website that offers our users a wide range of resources and information to assist you in researching your intended purchase.” I am a woodworker who was asked by ToolSelect.com to ...

Read this review »


I am disappointed

I am disappointed

10-20-2011 10:30 AM by MNgary | 17 comments »

While not, in my opinion, a professional level lathe this full-sized lathe is adequate for advanced hobbyists wanting to turn spindles longer than popular midi lathes allow and it does a nice job turning turning shallow bowls. I have not turned pens so do not know how it performs for that more precision task. Assembly is straightforward and waiting until the 170 pound lathe is placed in its final location before tightening the stand’s bolts allows installation on an uneven concrete ...

Read this review »


« prev 1 2 3 4 5 ... 8 next »
77 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase