LumberJocks

Reviews: JET

  • Advertise with us
Using New Shaper

Using New Shaper

03-04-2010 08:48 AM by ND2ELK | 15 comments »

I finally got to try out my new shaper today. It has a 1 1/2hp motor and comes with a 1/2” spindle, 3/4” spindle, 1/4” collet and 1/2” collet for router bits. It has two different speeds and a forward and reverse. I really like the idea that I can use shaper cutters and router bits on the same machine. I have not bought any shaper cutters yet because I feel I should buy shaper cutters for each of the jobs as I do them. That holds true for router bits as well. As I do m...

Read this review »


Jet 3HP Cabinet Saw with 30" Rip

Jet 3HP Cabinet Saw with 30" Rip

01-21-2012 04:33 PM by Walnutz | 9 comments »

There is a summary below if you don’t want to read this rather long review. Purchase and Delivery:I’ve had this saw a little over a year now and thought it would be a good point to review it. I decided on this saw after looking at countless reviews and considering price and overall weight.I purchased it from my local Woodcraft store. The owner of the store delivered it to my garage for a small fee. At first I was a little concerned that the packaging looked to be rather flimsy. It ha...

Read this review »


Jet 708480K JPS-30 Quality Hybrid Saw for under $800

Jet 708480K JPS-30 Quality Hybrid Saw for under $800

07-30-2010 08:04 PM by Holz_und_Geschichte41 | 6 comments »

Jet 708480K JPS-30: 10-Inch ProShop Table saw 1-3/4-Horsepower 30-Inch Rip fence With Steel Wings I have been woodworking for about 2 years now and felt it was time to spend the necessary dough to improve accuracy, cuts, rips, and broaden techniques. I spent a lot of time researching table saws based off cost, features, etc. I decided on this Jet for a handful of reasons: •Cost: $799.00 through Amazon: Amazon allows you to finance certain large ticket items for 12 months same as cash....

Read this review »


The best deal I ever got!

The best deal I ever got!

03-17-2008 10:38 PM by Moshe Eshel | 7 comments »

I was looking at lathes for almost two years before I purchased this one.I previously owned (still do) a JET Mini 1014 (non VS) and was very happy for it – except for the size limit – 10” is a little too small when you want to turn a platter or a salad bowl. However, money was a little tight and I sure couldn’t afford a Oneway or Vicmarc…Anyway I was checking out lathes and even found a chinese one selling for a decent price, but I was unsure of quality, living i...

Read this review »


Yes, I did need a drum sander

Yes, I did need a drum sander

09-06-2010 07:28 AM by Ben | 18 comments »

Overview When I run across a list of must-have tools in the woodworking magazines, a drum sander is never mentioned. I hemmed and hawed about whether or not I needed one for my growing hobby. I finally bought the Jet 16-32 last December and I am more satisfied with my purchase every day. A few things that were a little bothersome This machine can be slow. I am accustomed to my planer hogging off large chunks of wood in a couple of minutes. This tool is not meant to replace a plane...

Read this review »


Great Machine, Even Better Service

Great Machine, Even Better Service

09-26-2012 11:17 PM by lab7654 | 7 comments »

I bought this machine in July when CPO started running them on sale for $400. I was originally going to get the 8” version, but it wasn’t on sale and with the sale price of the 10” one, it was only $30 less. The 10” one comes with a stand, so even with the extra $30 you are probably paying the same. Anyway, I set it up at home as soon as I got it (first picture) and brought it to my cabin later that week. Upon the first start up, it made a rumbling noise when it shut d...

Read this review »


New verses old

New verses old

01-08-2014 05:37 PM by Jimthecarver | 14 comments »

Having the Jet 1014 mini lathe and really loving it, and having no problems with it what so ever. I decided on the 1221VS model. Unboxing it was fun, my past lathes have been hand me downs and/or very used and in need of rebuilding. Upon opening I removed the lose goodies that came with it and lifted off the foam to reveal the site of a turners dream…mine anyway.After getting it unboxed I noticed NO live center….bummer! Just a call to get that taken care of easily. Noticing a...

Read this review »


Extra Large drum sander

Extra Large drum sander

03-20-2009 10:12 PM by Tony | 18 comments »

I have just acquired this beast of a drum sander from Jet, minus the stand. The installation and initial setting up was very easy, even single handed, but be warned the main part of the unit is very heavy 85kg (187lbs), then add the extension tables and you are talking about 100kg (220lbs). (A similar unit to the Performax 22- 44 Plus Drum Sander, see the review posted by GaryK Please note that this is a European version, the drum sander specs may be different in your country. The i...

Read this review »


How could they even sell this?

How could they even sell this?

01-19-2010 10:17 PM by funchuck | 18 comments »

I was very excited to order this. A 10” Jointer/Planer for only $420? That’s a great deal! And it’s a JET! Well, when it arrived, it looked like the box had been through hell. The top and bottom flaps were opened, the stand was missing, and all the nuts, bolts and washers were scattered all over the place. I was ok with the missing stand, since I had an extra stand from an old Delta table saw I can use. I just had to make sure none of the other parts were missing....

Read this review »


A Love/Hate Relationship

A Love/Hate Relationship

04-11-2014 04:06 AM by Lildrgnoflb01 | 11 comments »

Ahh spring! That time of year when a young man’s thoughts turn to one thing…and since this is not the forum for that topic…let’s talk tools. Officially, I think this silly little woodworking hobby of mine has morphed into a full blown obsession. In fact, if I ever sell my home, the listing will probably read “Beautiful, three bedroom, two bath home with a Five-tool garage”. While I haven’t reached the absolute low of selling myself for money to feed my tool addiction, I have taken the ...

Read this review »


« prev 1 2 3 4 5 6 ... 9 next »
82 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com