LumberJocks

Reviews: JET

  • Advertise with us
Solid bandsaw.

Solid bandsaw.

01-28-2008 05:56 AM by gizmodyne | 8 comments »

I have owned this saw for about a year. I bought it at Rockler for $800 in a deal that included the rip fence and a very good DVD. It sits on locking casters and rolls quite nicely. AssemblyThe saw comes in one piece. The only thing to assemble is the table and fence. I had to drill out one of the caster holes that was not formed properly, but that was minor. I lifted the saw by myself which I don’t really recommend (310 pounds). The story4” dust port does the job. Wired ...

Read this review »


Real affordable quality

Real affordable quality

01-28-2008 11:37 AM by Rob McCune | 5 comments »

This machine has me hooked on Jet tools. I had really thought high quality cost a lot more. Granted it doesn’t have some of the features of it’s PowerMatic cousin (they are made by the same company). Power: More than enough. I haven’t been able to slow it down facing 6” wide boards. Reliability: Rock solid, the only issue I have had is with dust collection. As long as you have a dust collector hooked up there is no issue, but if you try to use just the chip ...

Read this review »


Super Value

Super Value

08-19-2009 06:08 AM by Ben | 13 comments »

This is a long review but, I hope it will be useful to someone considering this jointer. I purchased this jointer a few weeks ago and wanted to put it through it’s paces before reviewing it. This is an excellent machine and is one of my favorite tools in my shop. I spent a few months contemplating whether or not I even needed a jointer. After reading page after page of online forums I decided to go ahead and pull the trigger. I came really close to purchasing an 8 inch jointer ...

Read this review »


Rock Solid Jointer!

Rock Solid Jointer!

05-05-2010 05:44 PM by CryptKeeper | 10 comments »

I purchased this jointer this past weekend and I have already run a few feet of white oak without any problems. Pros:The manual was easy to follow and assembly was a snap. Plenty of power. Faced 6” white oak removing a 1/16 of inch no problem Reasonable foot print for small shop. I actually went to order the 8” Jet but after talking with my dealer I realized there was no way I could handle that unit by myself (unloading and assembly) and it would take up too much floor ...

Read this review »


Jet Jointer early christmas gift

Jet Jointer early christmas gift

11-19-2012 12:51 AM by Woodmaster1 | 9 comments »

My wife got me the jointer for christmas and ask is this the last machine I need for my shop. I said yes. (LOL) We all know that we never have enough. The jointer was package well and it took less than an hour to assemble, clean and set the outfeed and infeed tables. The jointer ran smooth with no excessive vibration. The motor needed no adjustment for the belt. The fence was easy to set square and has a stop to set it at 90 and keep it there. My trial cuts came out as smooth as glass. I ran ...

Read this review »


jet mini lathe

jet mini lathe

03-05-2008 06:24 PM by runngt | 13 comments »

This was my first lathe since middle school shop class. Back then I made a lamp for my mother that made it all the way to state finals. I was excited to get this in my shop and start turning on it and after several months it has performed flawlessly!! I have added the bed extension but not used the tool since adding it. The bed is very solid and the extension was easy to install and level. This model has the spindle lock and indexing head and operates at 500 – 3900 rpm. I think it is...

Read this review »


Missed the mark

Missed the mark

05-07-2008 03:48 PM by sawdustroad | 13 comments »

I must admit, I know very few mobile bases that are actually worth much, and this one is no exception. The brakes have no chance of holding against a load; The entire setup is very unstable, everything wobbles; Universal = Universal from 24×24 to 36×36

Read this review »


JET 708100 - Excellent value

JET 708100 - Excellent value

05-19-2008 05:22 PM by TheDane | 7 comments »

I purchased my Jet 708100 from a local machine shop, and consider it an excellent value. Assembly was easy (once I figured out some missing info in the instructions) and the trunion, fence, and miter gauge all checked out true with no alignment or adjustment required. I installed my saw on one of Jet’s adjustable rolling bases and have found it to be quite stable. Unlike other contractor saws, the 1.5HP motor is inside the saw’s cabinet, which makes it an excellent candidate...

Read this review »


Customer service

Customer service

05-30-2008 03:03 AM by Sawdust2 | 5 comments »

My Jet bandsaw is coming on 4 years old. I know because I bought it at the IWF in 2004.It has the “Carter-style” roller guides.The lower guides adjust on a cam to get close to the blade.There are a number of folks I let use my saw but I will accept responsibility for not loosening the adjusting nut. In any case, the cam broke.First call to Jet got me a very nice, but unknowledgeable young lady who passed me over to a guy in service who said that he would fax me a parts list. (Nowh...

Read this review »


Riser Block

Riser Block

07-12-2008 11:05 PM by khop | 6 comments »

The riser block made for the Grizzly G0555 14” bandsaw also works on the older Jet 14” saw. I compared the cost and it was a no brainer. The Grizzly H3051 Extension kit does the job for only $59.00 . This kit comes complete including a new 105” blade. The blade isn’t the best, so maybe order a good one for resawing. I also equiped this saw with new tires from Rockler. Most reviews say they are the ones to get. The cost of the tires are most resonable at rockler (HUH). ...

Read this review »


« prev 1 2 3 4 5 6 7 ... 9 next »
85 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com