LumberJocks

Reviews: JET

  • Advertise with us
An Inexpensive and Space Efficient Combination Jointer/Planer

An Inexpensive and Space Efficient Combination Jointer/Planer

10-02-2009 12:28 AM by Thomas Keefe | 24 comments »

About a year ago, I took my first woodworking class (at the age of 51!). It was the first time I had actually used a jointer or a planer. Up to this point I had always purchased S2S lumber and been limited by whatever HD had to offer. After using both of these in class, I decided I needed to be able to do this at home. However, I have a very small workshop (10’ x 10’) and a limited budget. There was no way that they would both fit and no way my wife would let me buy them. So a ben...

Read this review »


Love it!  Use it all the time.  Wish I bought it sooner

Love it! Use it all the time. Wish I bought it sooner

12-22-2009 08:29 PM by Rick | 15 comments »

I love this drum sander. I use it every time I dimension pieces for a project. I used to go to my ridgid 12 inch planer every time, and I still do if more needs to be taken off. But I prefer the finish the drum sander puts on my pieces before I start cutting them up for whatever I’m making. If you do a lot of inlay this is a must have machine. You can sand a piece down to 1/32 inch with this one. I usually only go to 1/16 or just past that for my inlay. Then I cut the strips to w...

Read this review »


Jet AFS-1000B Air Filtration System

Jet AFS-1000B Air Filtration System

02-28-2008 07:59 PM by Bill Hall | 9 comments »

I love this thing. My workshop is a small section in the rear of my basement. Just getting started, I was getting dust everywhere as I have a contractor type table saw. I’m working on collecting that dust at the source better, but stuff still gets in the air. My entire basement was covered with dust before I had this. I’ve had it for a few months now and I can honestly say I notice a difference. The air is cycled every so many minutes and if I leave it run for a couple hours...

Read this review »


Satisfies expectations

Satisfies expectations

03-04-2010 10:13 PM by Twigger | 5 comments »

This machine satisfies expectations as long as you keep in mind it’s a 30” long, 60 lb. machine. So don’t go looking to joint 8 foot long boards as if it’s a 60” long, 300 lb. unit. But for drawer fronts and sides, home-made router table and cross cut sled fences, and the like, it’s great! Also expect, as I’ve seen in reviews of all sorts of jointers, to spend two hours carefully setting the infeed and outfeed tables to being coplanar, and getting ...

Read this review »


"Benny" and Her JET

"Benny" and Her JET

01-05-2010 07:55 AM by mmh | 3 comments »

Well, I may need to change my name to “Benny” for this title, but this is my latest addition to the wood workshop as I dearly needed an upgrade from the Craftsman 6” x 36” belt sander which I tend to replace every 18 months (via 2 yr. service contract). The difference between the Craftsman 6” x 36” and the JET 6” x 48” models are like Night vs. Day. Same concept, but the function and quality are on opposite sides of the spectrum. For the pr...

Read this review »


Great 115 Volt Saw

Great 115 Volt Saw

09-01-2009 04:11 AM by Ben | 11 comments »

I finally received my supersaw after two months on backorder. It was worth the wait. Jet ran a Fathers day deal in June and I got it cheap. Assembly I spent the better part of a Saturday putting the whole machine together. Everything was packaged well and there was no damage. I would rate the manual a 7 out of 10. I did spend 20 minutes looking for one package of bolts that they had packed inside one of the fence rails with the cap on it. I finally read the manual very closely to ...

Read this review »


14 Inch Jet Bandsaw

14 Inch Jet Bandsaw

02-19-2008 04:50 AM by Dano | 30 comments »

I ordered this saw from Amazon on Monday and it was delivered on the following Friday utilizing their free shipping. I was worried that it might be damaged in route as it seems other have had similar experiences. However, it arrived in pristine condition, shrink wrapped to a wooden pallet. The saw was easy to assemble as there are only 4 pieces, the base, the saw, trunnion, and the table. Instructions are good and everything was there. The base does not have any “feet” and thus...

Read this review »


JET JWBS-14DX

JET JWBS-14DX

06-25-2010 04:40 AM by MOJOE | 14 comments »

So I picked this saw up from Overland Tool in Lenexa, Ks today. They let it go for $495.00. Amazon lists this saw for $969.00, so I feel like a found a pretty good deal. Anyway, got it home in 2 boxes, and upon opening, I saw that everything was in perfect condition. I have read reviews on other saws stating a 2-3 hour assembly time, so I figured this would be the same…..WRONG!!!!! Major props to JET here. I opened the box holding the base, and the motor was already mounted. I op...

Read this review »


The best deal I ever got!

The best deal I ever got!

03-17-2008 10:38 PM by Moshe Eshel | 7 comments »

I was looking at lathes for almost two years before I purchased this one.I previously owned (still do) a JET Mini 1014 (non VS) and was very happy for it – except for the size limit – 10” is a little too small when you want to turn a platter or a salad bowl. However, money was a little tight and I sure couldn’t afford a Oneway or Vicmarc…Anyway I was checking out lathes and even found a chinese one selling for a decent price, but I was unsure of quality, living i...

Read this review »


Jet JJP-12 Planer/Jointer combo (Planer mode)

Jet JJP-12 Planer/Jointer combo (Planer mode)

07-14-2008 04:51 AM by GaryB | 13 comments »

Here are several pics of the Jet planer/jointer combo machine in planer mode. Conversion from jointer to planer is really very easy. Loosen 2 lever locks, lift the beds ( which move in one piece with fence), swing dust shroud into planing position, then finally activate the feed rollers. The only time consuming part (20-30 seconds) is raising the bed up to desired position. The bed has to be lowered to about 6 inches for the dust port to clear, so to plane 1 inch stock, you have to raise ...

Read this review »


1 2 3 4 ... 8 next »
77 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase