LumberJocks

Reviews: JET

  • Advertise with us
Customer service

Customer service

05-30-2008 03:03 AM by Sawdust2 | 5 comments »

My Jet bandsaw is coming on 4 years old. I know because I bought it at the IWF in 2004.It has the “Carter-style” roller guides.The lower guides adjust on a cam to get close to the blade.There are a number of folks I let use my saw but I will accept responsibility for not loosening the adjusting nut. In any case, the cam broke.First call to Jet got me a very nice, but unknowledgeable young lady who passed me over to a guy in service who said that he would fax me a parts list. (Nowh...

Read this review »


Riser Block

Riser Block

07-12-2008 11:05 PM by khop | 5 comments »

The riser block made for the Grizzly G0555 14” bandsaw also works on the older Jet 14” saw. I compared the cost and it was a no brainer. The Grizzly H3051 Extension kit does the job for only $59.00 . This kit comes complete including a new 105” blade. The blade isn’t the best, so maybe order a good one for resawing. I also equiped this saw with new tires from Rockler. Most reviews say they are the ones to get. The cost of the tires are most resonable at rockler (HUH). ...

Read this review »


Jet JFM-5 Initial Assemble and Use Review

Jet JFM-5 Initial Assemble and Use Review

01-02-2009 04:40 AM by jcecil | 5 comments »

Like many others I recently purchased the Jet floor mortiser from CPO for 499-150 in Jet Rebates, so first off it was a fantastic deal that drove me to the tool. The tool was drop shipped directly from Jet. The tool arrived in two boxes that were on a pallat and shrink wrapped with little to no damage more than a small knick on the cardboard, so A+ to Jet and the freight company for packing and shipping. One box contains the stand and weighs in the 40 lbs neighborhood, then comes the oth...

Read this review »


Satisfies expectations

Satisfies expectations

03-04-2010 10:13 PM by Twigger | 5 comments »

This machine satisfies expectations as long as you keep in mind it’s a 30” long, 60 lb. machine. So don’t go looking to joint 8 foot long boards as if it’s a 60” long, 300 lb. unit. But for drawer fronts and sides, home-made router table and cross cut sled fences, and the like, it’s great! Also expect, as I’ve seen in reviews of all sorts of jointers, to spend two hours carefully setting the infeed and outfeed tables to being coplanar, and getting ...

Read this review »


BETTER THAN ANTICIPATED

BETTER THAN ANTICIPATED

02-19-2015 09:54 PM by steve421 | 5 comments »

I am writing my review in order to help people with their decision on a purchase of this unit. Before I begin I had some reservations about this and was unsure about making this investment, Even though it is an economical unit, 350 to 400 bucks is a lot to throw away on a piece of garbage that doesn;t work correctly Anyways I am more than pleased with this purchase. I never give 5 stars because when we write these posts we have no way of determining on how long something will last. I may writ...

Read this review »


"Benny" and Her JET

"Benny" and Her JET

01-05-2010 07:55 AM by mmh | 3 comments »

Well, I may need to change my name to “Benny” for this title, but this is my latest addition to the wood workshop as I dearly needed an upgrade from the Craftsman 6” x 36” belt sander which I tend to replace every 18 months (via 2 yr. service contract). The difference between the Craftsman 6” x 36” and the JET 6” x 48” models are like Night vs. Day. Same concept, but the function and quality are on opposite sides of the spectrum. For the pr...

Read this review »


A bargain and capable

A bargain and capable

03-04-2010 11:32 PM by Twigger | 3 comments »

This dust collector does a great job for individual power tools including my Jet Pro Shop table saw, JET JJP-8BT 8” Benchtop Planer/Jointer Combo, and router table. The planer especially puts out a lot of shavings which are almost completely sucked up. And it’s easy to move between equipment. VERY easy assembly.

Read this review »


Great upgrade from my old DP

Great upgrade from my old DP

01-02-2012 08:00 PM by Chris | 3 comments »

I have owned this drill press for about a year and everything was spot on right out of the box. The laser was perfectly aligned and I love the work light. The over sized table is great for woodworking especially as compared to the normal DP’s intended for metal working. It also appears to have plenty of power for my needs. All was going well until 2 days before this past Christmas when the motor would not start nor the work light or laser turn on. I was leaving town for a few days a...

Read this review »


Review of Jet 10" Jointer-Planer Combination Machine

Review of Jet 10" Jointer-Planer Combination Machine

01-31-2011 08:23 PM by Furnitude | 2 comments »

I removed my review because after using this machine, I can’t say that it is even decent quality. I no longer recommend it. I didn’t want people to buy it on my recommendation.Mitch

Read this review »


Functional, precise, compact

Functional, precise, compact

03-04-2010 10:28 PM by Twigger | 2 comments »

I at first used this saw as a chop saw, setting up a workshop and building various racks, etc. Then I used the miter feature in cutting some six-sided shelves for a maple corner cabinet. That’s where I’ve appreciated the precision and repeatability of this saw. I’m looking forward to the compound miter feature when I cut some crown molding for the cabinet. The instructions with the saw are clear enough to get me there. The saw operations, including slide, are very smooth.

Read this review »


« prev 1 ... 5 6 7 8 9 next »
82 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com