LumberJocks

Reviews: JET

  • Advertise with us
New Sander - Huge Help

New Sander - Huge Help

1634 days ago by Troy | 14 comments »

The sander I am reviewing is the new oscillating version, 22-44 Plus ODS. I was able to save a few hundred ordering and shipping through a freight forwarder myself, instead of using a local retailer. I try to help local businesses when I can, but when they don’t want to work with me, it’s difficult. It always irks me when a retailer tells me they don’t have the item in stock, (either out or don’t stock them in general), but that “they can order it for me.̶...

Read this review »


This sander gets the job done!

This sander gets the job done!

1382 days ago by RONFINCH | 14 comments »

Apprehensive at first spending so much on a sander, my fears we relieved after the first board was run through. The packaging was excellent, isn’t styrofoam wonderful? The base was easy to assemble with good instructions (pictures) provided. Be advised, get some help to lift the sanding machine on the stand!!!! It is heavy !!!! The in-feed table was easy to install, along with the optional extensions. Tracking was perfect after loosening the shipping tension right out of the box. So far...

Read this review »


New verses old

New verses old

223 days ago by Jimthecarver | 14 comments »

Having the Jet 1014 mini lathe and really loving it, and having no problems with it what so ever. I decided on the 1221VS model. Unboxing it was fun, my past lathes have been hand me downs and/or very used and in need of rebuilding. Upon opening I removed the lose goodies that came with it and lifted off the foam to reveal the site of a turners dream…mine anyway.After getting it unboxed I noticed NO live center….bummer! Just a call to get that taken care of easily. Noticing a...

Read this review »


Worth every dollar I paid for them

Worth every dollar I paid for them

84 days ago by paxorion | 14 comments »

OK, so my title might be a bit misleading. As a hobbyist, I don’t think I would be able to justify spending that healthy chunk of change on clamps if I paid the full retail price. Like many others, when the JET parallel clamps went on sale for 50% off during Black Friday 2013, I pulled the trigger to buy some, and I picked up the framing set (2×24” and 2×40” with the clamp blocks and bench-dog pins). Since I started using the JET parallel clamps, I’ve defi...

Read this review »


Super Value

Super Value

1827 days ago by Ben | 13 comments »

This is a long review but, I hope it will be useful to someone considering this jointer. I purchased this jointer a few weeks ago and wanted to put it through it’s paces before reviewing it. This is an excellent machine and is one of my favorite tools in my shop. I spent a few months contemplating whether or not I even needed a jointer. After reading page after page of online forums I decided to go ahead and pull the trigger. I came really close to purchasing an 8 inch jointer ...

Read this review »


jet mini lathe

jet mini lathe

2358 days ago by runngt | 13 comments »

This was my first lathe since middle school shop class. Back then I made a lamp for my mother that made it all the way to state finals. I was excited to get this in my shop and start turning on it and after several months it has performed flawlessly!! I have added the bed extension but not used the tool since adding it. The bed is very solid and the extension was easy to install and level. This model has the spindle lock and indexing head and operates at 500 – 3900 rpm. I think it is...

Read this review »


Missed the mark

Missed the mark

2295 days ago by sawdustroad | 13 comments »

I must admit, I know very few mobile bases that are actually worth much, and this one is no exception. The brakes have no chance of holding against a load; The entire setup is very unstable, everything wobbles; Universal = Universal from 24×24 to 36×36

Read this review »


Jet JJP-12 Planer/Jointer combo (Planer mode)

Jet JJP-12 Planer/Jointer combo (Planer mode)

2228 days ago by GaryB | 13 comments »

Here are several pics of the Jet planer/jointer combo machine in planer mode. Conversion from jointer to planer is really very easy. Loosen 2 lever locks, lift the beds ( which move in one piece with fence), swing dust shroud into planing position, then finally activate the feed rollers. The only time consuming part (20-30 seconds) is raising the bed up to desired position. The bed has to be lowered to about 6 inches for the dust port to clear, so to plane 1 inch stock, you have to raise ...

Read this review »


Jet Cabinet Saw

Jet Cabinet Saw

833 days ago by Cato | 13 comments »

I bought this table saw in March and I thought I would review it here as you have to do some digging to find reviews on this saw. The only other I found on this site was by Walnutz, a few months back. I have a blog with pics on the arrival condition and assembly on the saw so I won’t go into detail on that except to say that the saw arrived in absolutely perfect condition neatly on a pallet and shrink wrapped. This is my first true cabinet saw but in my research of and looking at the ma...

Read this review »


Great Idea but Poor Design

Great Idea but Poor Design

1407 days ago by jmichaeldesign | 12 comments »

I read reviews on this machine on multiple sites before I decided to purchase and came to the conclusion that it would serve me well. I had what I thought to be realistic expectations from this machine. I had expected a machine that would work well for boards up to 5, maybe 6 feet long. I expected it to be under powered, but usable. Many reviews spoke of the difficulty of getting the jointer tables coplanar. I planned on setting the jointer to take a 1/16” cut and leave it there all the...

Read this review »


« prev 1 2 3 4 5 6 ... 8 next »
77 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase