LumberJocks

Reviews: JET

  • Advertise with us
How could they even sell this?

How could they even sell this?

1647 days ago by funchuck | 18 comments »

I was very excited to order this. A 10” Jointer/Planer for only $420? That’s a great deal! And it’s a JET! Well, when it arrived, it looked like the box had been through hell. The top and bottom flaps were opened, the stand was missing, and all the nuts, bolts and washers were scattered all over the place. I was ok with the missing stand, since I had an extra stand from an old Delta table saw I can use. I just had to make sure none of the other parts were missing....

Read this review »


Ordered New Lathe Today

Ordered New Lathe Today

1835 days ago by StanCurtis | 17 comments »

Today I ordered a new JET JWL-1442VSK wood lathe. The dealer did not have one in-stock, but it is to be delivered from the distribution center on Friday per his promise. I would like to thank ND2ELK for introducing me to LumberJocks.com. The reviews and forums were a great help to me. One of the reasons I chose this particular lathe is the accessories I have for my JET 1014 lathe are nearly all usable on the larger unit. My small lathe, which I have been using for three or four years, w...

Read this review »


JET JJP-12HH, 2-month review

JET JJP-12HH, 2-month review

1280 days ago by mstenner | 17 comments »

After two months with the JJP-12HH, I’m ready to share what I’ve learned. The bottom line: this is a great tool and I’d recommend it for the serious amateur. I wanted a lot of capability in my small (12×15) shop and am very happy. Shipping & Unpacking This is a large and heavy tool (my wife says I’m no longer the “biggest tool in the shop”), and it comes almost fully assembled. You will need to get the crate where it’s going intact. ...

Read this review »


I am disappointed

I am disappointed

1008 days ago by MNgary | 17 comments »

While not, in my opinion, a professional level lathe this full-sized lathe is adequate for advanced hobbyists wanting to turn spindles longer than popular midi lathes allow and it does a nice job turning turning shallow bowls. I have not turned pens so do not know how it performs for that more precision task. Assembly is straightforward and waiting until the 170 pound lathe is placed in its final location before tightening the stand’s bolts allows installation on an uneven concrete ...

Read this review »


Review: JET Hybrid Table Saw JPS-10

Review: JET Hybrid Table Saw JPS-10

815 days ago by Rb12 | 16 comments »

This is my first tool review and I know it is not something new to the market, but still sold so, I figured I would throw it out there for others. Recently bought a JET Hybrid Table Saw JPS-10 . Up until now I had my dad’s hand-me-down, 30-year-old Delta/Rockwell, 1-hp Model 9 Contractor Saw. The fence was horrible, it had metal lattice work wings (finger catchers), a bearing had gone in the motor and it was loud as hell (forget the dime test, it couldn’t pass the push stick test… where ...

Read this review »


Love it!  Use it all the time.  Wish I bought it sooner

Love it! Use it all the time. Wish I bought it sooner

1675 days ago by Rick | 15 comments »

I love this drum sander. I use it every time I dimension pieces for a project. I used to go to my ridgid 12 inch planer every time, and I still do if more needs to be taken off. But I prefer the finish the drum sander puts on my pieces before I start cutting them up for whatever I’m making. If you do a lot of inlay this is a must have machine. You can sand a piece down to 1/32 inch with this one. I usually only go to 1/16 or just past that for my inlay. Then I cut the strips to w...

Read this review »


Using New Shaper

Using New Shaper

1603 days ago by ND2ELK | 15 comments »

I finally got to try out my new shaper today. It has a 1 1/2hp motor and comes with a 1/2” spindle, 3/4” spindle, 1/4” collet and 1/2” collet for router bits. It has two different speeds and a forward and reverse. I really like the idea that I can use shaper cutters and router bits on the same machine. I have not bought any shaper cutters yet because I feel I should buy shaper cutters for each of the jobs as I do them. That holds true for router bits as well. As I do m...

Read this review »


JET 6-inch riser kit for 14 inch bandsaw

JET 6-inch riser kit for 14 inch bandsaw

1479 days ago by MOJOE | 15 comments »

So I installed this kit today on my JWBS-14DX. It was very straightforward and took about 30 minutes by myself. I must confess that I watched a quick vid on youtube, and ditched the instructions. I did look through them afterwards that they seemed alright. Anyway, the fit and finish on this kit is pretty good, and everything went together smoothly. My only complaint…..the powder coating on the riser block was not quite as nice as the powder coating on the saw, but, that really isn&...

Read this review »


JET JWBS-14DX

JET JWBS-14DX

1491 days ago by MOJOE | 14 comments »

So I picked this saw up from Overland Tool in Lenexa, Ks today. They let it go for $495.00. Amazon lists this saw for $969.00, so I feel like a found a pretty good deal. Anyway, got it home in 2 boxes, and upon opening, I saw that everything was in perfect condition. I have read reviews on other saws stating a 2-3 hour assembly time, so I figured this would be the same…..WRONG!!!!! Major props to JET here. I opened the box holding the base, and the motor was already mounted. I op...

Read this review »


New toy for my shop

New toy for my shop

1722 days ago by Greg The Cajun Box Sculptor | 14 comments »

I just got my new Jet sander delivered a couple of days ago (Tuesday). It comes in three boxes, two are managable…the one containing the stand and the box containing the feed table/conveyor and feed motor. The third box contains the motor unit and drum…it weighs somewhere between 70,000 & 75,000 pounds (or so it felt like) when I had to unpack it and set it up by myself.A friend said he would come help me set it up this weekend but I was way too impatient to watch the sander j...

Read this review »


« prev 1 2 3 4 5 ... 8 next »
77 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase