LumberJocks

Reviews: Irwin

  • Advertise with us
Good and fast

Good and fast

10-06-2009 04:05 PM by DannyBoy | 4 comments »

I picked up the 5-piece set of these from Lowes yesterday to drill holes to run wires through floor joists. I’ll be comparing these to the last ones I had which came in a catch-all bit kit I got for Christmas years ago (they sucked). The bits bored fast. I mean really fast. I’m not sure what difference in the design that makes them bore so quickly, but it definitely made the difference. I used the 5/8” to bore through the joists at a slight angle (since I didn’t...

Read this review »


Irwin Miter Saw Laser Guide -- works well so far

Irwin Miter Saw Laser Guide -- works well so far

05-29-2008 01:42 AM by Matt (Upper Cut) | 12 comments »

This weekend I bought and installed the Irwin Miter Saw Laser Guide onto my DeWalt Miter Saw. I’m very happy with it so far. It was easy to install It projects a crisp clean line to the left of the blade (unless your blade retaining nut is on the right of the blade) It is very helpful with complex cuts or cutting complex material It is less helpful with straight cuts on square material (it’s easier for you to know where the blade will be cutting in this regard) It was c...

Read this review »


Accurate, Quick & Easy

Accurate, Quick & Easy

03-08-2008 11:45 PM by Jim Crockett (USN Retired) | 12 comments »

For years, I have had difficulty cutting a straight, perpendicular line with a handsaw. No matter what method I tried, the cut was neither straight nor perpendicular to the stock, most often both. I had got to the point where I would pull out my circsaw, jigsaw, or fire up the table saw for all cuts, a real pain. Then, a couple of months ago, I purchased the Irwin #213104 Dovetail/Detail Saw. I feel pretty certain that I didn’t suddenly develop the talent to saw a straight line, so I mu...

Read this review »


 Irwin XP, One handed bar clamps/spreaders

Irwin XP, One handed bar clamps/spreaders

02-11-2008 01:01 AM by Dick, & Barb Cain | 17 comments »

I received a pair of these 12’’ clamps as a gift. I have never used one handed clamps before this pair. Now whenever I have a clamping job, I grab these right away. It’s almost like having an extra hand, & they have plenty of clamping power. They provide 550 lbs of one-handed force (900 lbs of two-handed force). I also like the soft no-slip jaws, & you can reverse them to push things apart, such as chair rungs, or when dry fitting cabinet parts. ...

Read this review »


Irwin F-clamps

Irwin F-clamps

01-26-2008 11:23 PM by aaronmolloy | 0 comments »

These irwin f-clamps are worth buying. theyn are strong and easy to use

Read this review »


« prev 1 2
15 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase