LumberJocks

Reviews: Incra

  • Advertise with us
A surprisingly flimsy tool from INCRA--Not recommended

A surprisingly flimsy tool from INCRA--Not recommended

07-06-2009 03:54 AM by Durnik150 | 14 comments »

Price $36.99 via Amazon and Rockler Coming from a company like Incra I expected this item to be one top of the line rule. I was wrong. Throw in the excessive cost and in my opinion we have an item that can be passed over for something better. The measurement increments are accurate and as specific as can be. However, this rule is stamped from very flimsy material that easily bends and gets pulled out of alignment. This defeats the point of this item since it is designed to sit alont the...

Read this review »


Incra Miter 5000 - A tale of delight

Incra Miter 5000 - A tale of delight

04-24-2009 05:09 PM by WhittleMeThis | 9 comments »

Having used a cross cut sled and a standard miter guage for years, I thought I would upgrade my ability to make angled cuts on my table saw. As many, I struggled with angle cuts on my compound miter saw, for mouldering and general carpentry my miter saw did a great job but when it came to very precise miter joints my compound miter saw fell short. The compound miter saw always required a lot of fine tuning and test cuts and often with less precision than I would have liked. I spent some time...

Read this review »


Incra T-rule very nice indeed

Incra T-rule very nice indeed

03-14-2009 12:04 AM by Craftsman on the lake | 17 comments »

A short while back I purchased the Incra 6” T-rule. it is a small piece of t-track with a precision rule attached to it. Two knobs allow you to slide the rule along the t-track to make a square out of it. The thing has scales and numbers galore and if you don’t have new eyes, then like me you may need your magnifiers. Even though, the numbers and lines are extremely crisp and clear. It has scales for 1/16”, 1/32”, and 1/64”’s The thing that makes this rule ...

Read this review »


Incra V27 Basic Miter Gauge

Incra V27 Basic Miter Gauge

03-13-2009 03:20 AM by knotscott | 8 comments »

The V27 is Incra’s entry level basic gauge retailing at about $60 and is constructed primarily of sturdy steel with some well placed nylon trim pieces. The bottom of the steel protractor head glides on a nylon pad that rides along the table surface. The Incra has a “GlideLOCK” miter bar that consists of 4 expandable nylon adjustment spacers in the bar to be perfectly taylor fitted to the standard 3/4”x3/8” miter slot on your saw. There is a removable t-clip on th...

Read this review »


The best table saw (and shop) accessory I have ever owned

The best table saw (and shop) accessory I have ever owned

02-26-2008 08:45 PM by RickH | 17 comments »

At the first woodworking show I attended years ago I became aware of the Incra table saw fence systems, and bought their first version almost 10 years ago. I upgraded to their LS system (lead-screw) about 4 years ago by purchasing a new postioner w/machined fence, which is even easier to use. What the Incra fence does is allow for precise and repeatable fence alignment on your table saw: > Precision – allows adjustments as fine as .001”, though their standard measuring meth...

Read this review »


Incra - A great router fence

Incra - A great router fence

02-05-2008 02:58 AM by GaryK | 19 comments »

I purchased this after seeing it at the Woodworkers show in Dallas this year. I didn’t get it at the show becausewoodpeckers had it cheaper and free shipping. (Saved $80) I have been looking at it for a while, but thought what’s the big deal, my fence works just fine. Then atthe show I saw some features that I liked. Now, like at all shows they have nice slick demos that they doto make their product look simple and easy. Well, for the most part it is simple and easy. The sys...

Read this review »


Incra Miter Express / Miter 1000SE - VIDEO

Incra Miter Express / Miter 1000SE - VIDEO

01-13-2008 05:29 PM by mot | 15 comments »

I wanted to add to the mitre gauge posts. Wayne posted a photo tour of the Jessem System, and David posted initial impressions of the Kreg System. The incra 1000SE is seen here in the Incra Miter Express sled. Both are available at Woodpeck.com You can see the kerf where the mitre sled straddles the blade in the tablesaw allowing for the cutoff piece to be coplanar with the workpiece. This decreases the chance of the saw flinging the cutoff piece back. The Incra guage is adjutab...

Read this review »


« prev 1 2 3 4
37 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com