LumberJocks

Reviews: Incra

  • Advertise with us
Incra Gauge - precision marking gauge

Incra Gauge - precision marking gauge

02-14-2010 02:31 PM by Requiem | 8 comments »

Well I thought I would start off my review with items that I would use throughout my apprenticeship and being a novice I will review items that I think are good for the average home DIY woodworking. Items that anyone can afford not tools that we can only dream about or keep on display because they are expensive but we can actually use. I pick the Incra Gauge as for my item to review, the reason for this is that this one tool I would use on all my projects and for me it has been a valuable...

Read this review »


Micro Jig SteelPro Splitter - for 1/8" Kerf Blades

Micro Jig SteelPro Splitter - for 1/8" Kerf Blades

02-02-2010 05:41 PM by PetVet | 17 comments »

You can purchase this product from Incra for about $35. I was interested in getting a splitter that I would use, as my rip guard/splitter was a pain to install every time I wanted to rip something.It comes as a kit, with an installation jig, and several splitters of various widths. The instruction sheet was fairly easy to follow. You need a couple pieces of 1/2 inch stock, one for the jig to attach to, and one as a test piece. They have you drill the holes in your saw insert with the prov...

Read this review »


Incra Measuring/Marking tool does it in Decimal and Metric!

Incra Measuring/Marking tool does it in Decimal and Metric!

01-21-2010 05:11 AM by GaryK | 16 comments »

A while ago I posted a review on a decimal measuring tape and some of you liked decimals. If you haven’t already HERE is it. Well for those of you that do, I have another product that uses them. It’s the Incra Professional T-Rule. As you can see from he first picture it has the same features as the regular Incra rules except this one has markings for decimal and metric! Now this feature is only included on the “Professional” model. Also it still retains the stand...

Read this review »


Every woodworker should have one of these.

Every woodworker should have one of these.

12-22-2009 08:37 PM by Rick | 10 comments »

This is used nearly every time my pencil is used. It’s just great. Perfect layouts are so much easier in every way now. I don’t really have much else to say. The picture is pretty self explanitory. Oh, I use the 6 inch because I usually make smaller things. Even if you make large projects most of the layout is at the end of the board for joinery and what not so the 6 inch should be fine for that too.Get one. I can’t imagine you’ll wish you hadn’t.

Read this review »


Incra's 52inch LS positioner package!

Incra's 52inch LS positioner package!

12-21-2009 05:28 AM by BigBard | 16 comments »

One year ago I began the quest to make things from wood. I have learned so much in one year and I still have a long way to go. After a satisfying purchase of a Incra1000se miter gauge, I thought I couldn’t go wrong with this LS positioner plunge. I was right, this system cuts extremely accurate. That micro-adjust knob is excellent, you can move it by the thousands of an inch. You can truly move the fence with shear accuracy. The wonderfence did take a few extra steps to square up but it...

Read this review »


 Incra TS-LS Table saw fence

Incra TS-LS Table saw fence

12-05-2009 03:55 AM by Greg..the Cajun Wood Artist | 12 comments »

I have been reading about the Incra Table Saw fence for a while now and finally decided to bite the bullet (or bite the wallet) and buy one. All that I can say is that this fence lives up to all the expectations I have of it. This gave me the opportunity to do a fine tuning of my Grizzly saw and adjust everything that could possibly be fine tuned before installing the Incra fence system. The setup was easy and fast with the well written instructions. Easy to install and easy to adjust. I spe...

Read this review »


A surprisingly flimsy tool from INCRA--Not recommended

A surprisingly flimsy tool from INCRA--Not recommended

07-06-2009 03:54 AM by Durnik150 | 14 comments »

Price $36.99 via Amazon and Rockler Coming from a company like Incra I expected this item to be one top of the line rule. I was wrong. Throw in the excessive cost and in my opinion we have an item that can be passed over for something better. The measurement increments are accurate and as specific as can be. However, this rule is stamped from very flimsy material that easily bends and gets pulled out of alignment. This defeats the point of this item since it is designed to sit alont the...

Read this review »


Incra Miter 5000 - A tale of delight

Incra Miter 5000 - A tale of delight

04-24-2009 05:09 PM by WhittleMeThis | 9 comments »

Having used a cross cut sled and a standard miter guage for years, I thought I would upgrade my ability to make angled cuts on my table saw. As many, I struggled with angle cuts on my compound miter saw, for mouldering and general carpentry my miter saw did a great job but when it came to very precise miter joints my compound miter saw fell short. The compound miter saw always required a lot of fine tuning and test cuts and often with less precision than I would have liked. I spent some time...

Read this review »


Incra T-rule very nice indeed

Incra T-rule very nice indeed

03-14-2009 12:04 AM by Craftsman on the lake | 17 comments »

A short while back I purchased the Incra 6” T-rule. it is a small piece of t-track with a precision rule attached to it. Two knobs allow you to slide the rule along the t-track to make a square out of it. The thing has scales and numbers galore and if you don’t have new eyes, then like me you may need your magnifiers. Even though, the numbers and lines are extremely crisp and clear. It has scales for 1/16”, 1/32”, and 1/64”’s The thing that makes this rule ...

Read this review »


Incra V27 Basic Miter Gauge

Incra V27 Basic Miter Gauge

03-13-2009 03:20 AM by knotscott | 8 comments »

The V27 is Incra’s entry level basic gauge retailing at about $60 and is constructed primarily of sturdy steel with some well placed nylon trim pieces. The bottom of the steel protractor head glides on a nylon pad that rides along the table surface. The Incra has a “GlideLOCK” miter bar that consists of 4 expandable nylon adjustment spacers in the bar to be perfectly taylor fitted to the standard 3/4”x3/8” miter slot on your saw. There is a removable t-clip on th...

Read this review »


« prev 1 2 3 4 next »
33 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase