LumberJocks

Reviews: Incra

  • Advertise with us
Incra TS-LS Table Saw Fence

Incra TS-LS Table Saw Fence

648 days ago by Slimey243 | 18 comments »

I see that the last review was posted around 3 years ago. I bought this item several weeks ago and couldn’t be more pleased with it. What the other 3 people said about it is still true today! I am totally amazed how accurate this system is when making my cuts. I just wish I would have been able to afford the router table combo!

Read this review »


Excellent once tuned

Excellent once tuned

850 days ago by mcase | 15 comments »

Let me start by saying that I am very pleased with the results of this miter gauge. The cuts it produces are consistently great. I check them against a Mitatoyo machinist square and they are dead on. They are far, far more accurate and consistent then those produced by my Bosch slider. There are however some limitations and problems which I will explain in detail so my fellow LJs will know just what to expect. I bought the Incra 1000 SE about three months ago. The Incra 1000 SE comes...

Read this review »


'Incra Rule' Marking Ruler..an indispensible tool!

'Incra Rule' Marking Ruler..an indispensible tool!

869 days ago by poopiekat | 7 comments »

I purchased this recently online, and was thrilled to get a first hand look at it when it arrived. It has micro-fine slits precisely every 1/32 inch, so that you can lay out lines with absolute precision. The holes are pierced for a 0.5 lead mechanical pencil, or a very sharp conventional pencil. I don’t like making random dovetails. Yeah, I know, some eminent craftsmen simply touch down the handsaw and cut….but that just goes against the grain (heh) of my own approach, tha...

Read this review »


Easy to install and simple to addjust

Easy to install and simple to addjust

1052 days ago by ChunkyC | 0 comments »

Incra Miter Slider Not a whole lot to say about miter slot sliders but I like these over the Kreg’s for the simple fact that you can adjust the width from above. The Kreg’s you have to remove the slider, make an adjustment using the set screw, repeat until you get the fit that you want. The Incra’s use the “spreader” method for adjusting the fit. You just have to locate and drill a 1/4” hole through the sled to allow access to the adjustment. Down si...

Read this review »


Precision at a Bargain Price

Precision at a Bargain Price

1058 days ago by Steven Davis | 15 comments »

If you are like me, you see the pictures of the Incra Table Saw or Router fences, drool a bit, look at your wallet, sigh, and move on. While trolling Craig’s List, I stumbled onto the Incra Jig.. for $30! I looked at the picture and, after my disappointment that someone was NOT selling the table saw system for $30 (HA!), I was pretty intrigued by the tool and did some Internet research… Apparently, the Incra Jig (or Incra Universal Jig) was Incra’s first product. It...

Read this review »


Great product, even better support!

Great product, even better support!

1127 days ago by felkadelic | 5 comments »

I originally picked this up last fall at Rockler, at a significant discount from the $84.99 MSRP (I believe I got it for $49.99). At the time, I didn’t have a table saw with a standard miter slot, so I was only able to use this on my router table for routing the end of pieces. While it worked just fine for that task, I held off judgment until getting a table saw so that I could use this for its main intended purpose. A couple weeks ago I got a new (to me) Unisaw and was finally abl...

Read this review »


Incra Ultra Lite on Jessem Table

Incra Ultra Lite on Jessem Table

1164 days ago by TechRedneck | 6 comments »

Being a weekend woodworker (some evenings too) my time is important. Most of the joinery I’ve done is the basic stuff.. Biscuits, dadoes, M&T and pocket hole. I wanted a system to make some nice jewelry boxes for my grandchildren and step up my work a notch without spending a ton of money on a bunch of dovetail jigs, and making a bunch of box joint jigs that take up room in the shop. The Incra system interested me. I watched the videos and thought the concept was interesting fr...

Read this review »


Miter gauge and blade purchase

Miter gauge and blade purchase

1384 days ago by Ken90712 | 8 comments »

Sunday after a long workweek was over, with a little too much overtime for my taste I was reading Rockler sales paper. I had Monday off and Blondie was working, OH no, so off to Rockler I go. I received a coupon in the mail for 50 % of a 2nd item after purchasing a regular priced item of equal or less value. So I put in the reading glass’s ( New for me never had to before, LOL ) to read their fine print of all the things that were excluded from this coupon. I was happy to read Forres...

Read this review »


Up-Grade  Miter Gauge

Up-Grade Miter Gauge

1600 days ago by blackcherry | 11 comments »

I recently have been up-grading some of my tool and on my short list was my table saw miter gauge. I felt that it was OK but not up to snuff with what was newer on the market. I’ve been a Incra user for many year and have never been displeased with any of there products so I started looking around and found a new Miter 1000SE on E-bay for sale below the market price. It was on one of those buy now or make and offer kinda deals so I made a offer of 20 dollars below what it lists at an...

Read this review »


Incra Gauge - precision marking gauge

Incra Gauge - precision marking gauge

1619 days ago by Requiem | 8 comments »

Well I thought I would start off my review with items that I would use throughout my apprenticeship and being a novice I will review items that I think are good for the average home DIY woodworking. Items that anyone can afford not tools that we can only dream about or keep on display because they are expensive but we can actually use. I pick the Incra Gauge as for my item to review, the reason for this is that this one tool I would use on all my projects and for me it has been a valuable...

Read this review »


« prev 1 2 3 4 next »
32 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase