LumberJocks

Reviews: Hitachi

Hitachi Table Saw

Hitachi Table Saw

321 days ago by Obi | 56 comments »

On first look the Hitachi C10Fl looked like a great deal but after using it for 2 years the following has become evident: FOR EVERYONE WHO THINKS I PUT THE DUST COLLECTION ON FACING THE WRONG DIRECTION !!! NOTE THAT THE PORT IS OPPOSITE THE OPERATOR. THE PORT WAS INSTALLED ACCORDING TO THE INSTRUCTIONS. Rated according to the manufacturer at 3 hp found out that it is actually 1 1/2 HP a bold faced lie that they should be sued for. This is a terrible design, and although bigger and be...

Read this review »


Hitachi M12V, 3 ¼ Hp, Plunge Router

Hitachi M12V, 3 ¼ Hp, Plunge Router

315 days ago by dataman | 9 comments »

I have two of these routers!I mounted on in my router table and use the other one for manual jobs. Having a 3 ¼ Hp, 15 AMP motor, the Hitachi M12V is can handle virtually any routing job or bit design. The motor features an infinitely adjustable electronic speed control dial and soft start to make it manageable for hand use. The 8,000 to 20,000 rpm range (no load) dial is divided by 1 through 5 numerals (no detents) on the dial. The On/Off switch is located off the right-side handle and...

Read this review »


Hitachi C10FL Hybrid Table Saw - Awesome saw for the money

Hitachi C10FL Hybrid Table Saw - Awesome saw for the money

185 days ago by Weekend_Carpenter | 8 comments »

I just bought this saw ($499 – 15%(Promo) – 10% (coupon) -$100 (gift card thru MIR), and I love it. This is my second table saw, and I am far from a professional woodworker (that is why I bought a $500 TS ;), and not a $1000+ Jet table saw). I have used it with pine and cedar in the month that I have had it. It cut great through both, even when using the dado blade. This saw is not perfect, but it is a lot better than the others in the same price range. Here are the pros, and cons (and no I d...

Read this review »


Hitachi misses the mark with their  model C12LSH

Hitachi misses the mark with their model C12LSH

276 days ago by Bob #2 | 7 comments »

Last October 27/2007 I was induced to purchase the above mentioned CMS at a trade show .They Hitachi offered me a $100.00 rebate off the floor price to complete with Bosch and Dewalt who were, as I remember, breathing down their necks with pricing.It’s now March 3th 2008 and despite several e-mails and phone calls I am told to be patient another 2 weeks and they would give me my money back.The last time they said that it took three weeks before I eventually called again. Had they not...

Read this review »


Hitachi 10in 40t ATB, good deal at about $25

Hitachi 10in 40t ATB, good deal at about $25

101 days ago by dsb1829 | 6 comments »

I have been using cheap and hand-me-down blades ever since I got my first tablesaw a couple years ago. Sawing has always been loud. Smoke and dust always looming in the near future for anything thicker than 1/2”. I hadn’t been too pleased with my last purchase. Go figure $10 is not going to cut too well. So I was in Lowe’s the other day. I had a $10 coupon that required me to get my total up to $50 to use. I was drawn over to the saw blades by the Ice finish on the ...

Read this review »


Great Saw for a Great Price

Great Saw for a Great Price

279 days ago by teenagewoodworker | 5 comments »

This is my first Miter Saw so i have nothing to compare it to but i think that it is a great Miter Saw. Just to start off this saw costs 140$ at Lowe’s and i bought mine without a laser. A wise man once told me that the blade does that cutting and not the laser, and he wants to see where the actual thing that’s doing the actual cutting is going to actually cut. Now back to the saw. it came ready to run right out of the box and all the different angles that i checked were right ...

Read this review »


My first REAL cordless driver!

My first REAL cordless driver!

234 days ago by Tess | 4 comments »

Bought this 18V Lithium-Ion Drill-Driver from Home Hardware, refurbished, for $190 CDN. Sound steep? Well, I’ve got to tell you, it’s worth every penny! I used to do home renovations for fun and now I’ve gotten into professional contracting. I’d gone through a few cheapie cordless drills just with the around-the-house use and I was never happy with them. They were never robust enough (any screws over 2” and I wouldn’t have even tried the cordless). ...

Read this review »


A REALLY nice Compound Miter Saw find.

A REALLY nice Compound Miter Saw find.

320 days ago by Coffinmaker | 4 comments »

I have always looked at Hitachi Tools when they first came out and starting reading all the reviews I could find on there new line of tools.I was REALLY impressed because after reading( the reviews..) on them I never once read anything bad about there products.I even posted questions on several Woodworkers forums.When the time came to replace my tired old Delta I chose an Hitachi 12 inch Compound Miter Saw,well also for the fact I got a great deal on it too..!!As always when buying a new too...

Read this review »


worked the saw hard for 2 years

worked the saw hard for 2 years

22 days ago by OAKCUTTER | 2 comments »

I bought that same saw (Hitachi) two years ago, I have worked it hard cutting 3×3x8’ oak up into 1×1x8’ then into 1×1x5 inches, it has never quit me. I threw that plastic dust collection pan in the trash, and make my own that fits a 4” duct. I am about to buy another one, for tax write off only. This saw has made me alot of money. I don’t use it every day, but every other day I work the crap out of it. I am not a pro (not close) just a extra money t...

Read this review »


Powerful corded drill for serious users

Powerful corded drill for serious users

10 days ago by ferstler | 0 comments »

I picked this drill up at Lowe’s for $119 quite some time ago when my wife decided I would build an extensive wooden walkway network out in our yard. Since such things are going to have to be built out of pressure-treated wood I knew I would need a powerful drill to push 1/2-inch bits through wet lumber. I had already drilled lumber like that for a deck job some years back, and I will say that the 3/4 amp drills I had on hand to do the work were stressed by the project considerably. ...

Read this review »


Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


Your Online Shop - Your Support Is Greatly Appreciated - Your Woodworking Showcase - 3 Ways To Help, Financially - Your Woodworking Community

Woodworking StoreApparel StoreMake a Donation
Bookmark And Share This Page
  • View all advertisers
  • Advertise with us

DISCLAIMER: All views and comments posted by members are not necessarily those of LumberJocks.com or of those working on the site.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase