LumberJocks

Reviews: General International

  • Advertise with us
Boring machine

Boring machine

03-03-2016 05:04 AM by Steve | 7 comments »

Used my boring machine to drill a bunch of holes in my cabinet box sides. Drilled 7 cabinets in around 20 minutes, this is a very easy tool to setup and worked just great. the only thing its a little loud while running so I put on my hearing protection.

Read this review »


20: single surface planer

20: single surface planer

07-10-2015 02:43 AM by Steve | 2 comments »

Gave this planer a good workout today. Between the jointer yesterday and the planer today ended up with 6 55 Gal. drums of shavings. The planer performed great no problems at all. The helical head a lot quieter than knives. Reduced the 6” dust port to 4” and everything got sucked right out, another great tool!

Read this review »


General Internationl cyclone dust collector

General Internationl cyclone dust collector

07-09-2015 05:08 AM by Steve | 5 comments »

Used my cyclone dust collector today for the first time and does that sucker ever suck the shavings. I reduced the 6” dust outlet to 4” and had no issues at all except the noise, oh well it does say hearing protection required.

Read this review »


General International 10" Helical head jointer.

General International 10" Helical head jointer.

07-09-2015 04:51 AM by Steve | 3 comments »

Tried my jointer for the first time, everything good except one bolt and washer was loose holding the pulley onto the shaft driving the head. It actually fell out and after 5 minutes of looking where it came from, replaced it and continued jointing. The safety guard over the head has a spring on a shaft that should return the guard after the wood has passed through, it did not really work so good so I preloaded the spring a little and sprayed a little WD-40 on the pin and everything worke...

Read this review »


Line boring machine.

Line boring machine.

03-09-2015 01:41 AM by Steve | 1 comment »

Well finally got a set of 5mm. boring bits and installed them in my machine. The bits fit quite tight into the 10mm chuck and I am hoping that when I need to change them out it can be done with no issues. The machine is quite noisy but there is a hearing protection required warning sign on it. I bored a couple sets of holes in a piece of baltic birch plywood and also a piece of pine, the machine worked fine and the bored holes were very clean with no tear out. This machine seems to be constr...

Read this review »


Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com