LumberJocks

Reviews: Freud

  • Advertise with us
7 1/4" thin kerf blade for your table saw.

7 1/4" thin kerf blade for your table saw.

11-23-2009 05:16 AM by duasbata | 1 comment »

Haven’t used a thin kerf blade before so I purchased the 7 1/4” Freud Diablo Demo Demon Circular Saw blade for $15 from Home Depot just to see what all the hype is about thin kerf blades. What a difference and the price is right. Noticed that my saw sounds different and stops faster. There is significantly less dust. The saw feels more powerful when I’m cutting. The kerf is about 1/16” and the wood is ash.The blade stands at 1 3/4” when raised at it’...

Read this review »


PREMIER FUSION FREUD

PREMIER FUSION FREUD

11-04-2009 09:02 PM by doyoulikegumwood | 10 comments »

well here goes the story i own 2 WWII’s i my spare was off being sharpened and i was doing some cross cutting on a TS (i have the sliding miter table on my uni saw) well i messed up when putting the the rail onto the table and was feeding a panel into the saw and ding ran my blade into the aluminum. long story short here i am with out a decent blade in the middle of project. off to rockler i go so i have Mindy get me out a brand spankin new WWII out of the case and i start grip...

Read this review »


Glue Line Rip !

Glue Line Rip !

10-20-2009 02:16 AM by Routerisstillmyname | 30 comments »

When Freud claims that this blade will give you flawless rips and glue joints, they are not boasting.I purchased this blade few months back but never got around using it until this week when I got tired cleaning the mess my jointer was making.Long story short, this put my jointer to shame. The cut is so smooth; you may have to scuff it up a bit before gluing.Well, I’m not the least bit surprised, Freud makes some of the longest lasting and sharpest router bits and saw blades around. it&...

Read this review »


customer service

customer service

07-12-2009 03:56 PM by hootr | 7 comments »

i emailed freud customer service yesterday (saturday) about a problem with my router and to my surprise this morning they had responded with the information on parts and a tech support #. i really wasn’t expecting that over a weekend. great service i think the FT2000E has been table mounted since new, the last couple years, with no complaintsthe other day the router wouldn’t start. flipped the switch a couple times and it started. happened again a little later. loose wire, bad ...

Read this review »


Freud Quadra-Cut Roundover Bit "Wow"

Freud Quadra-Cut Roundover Bit "Wow"

06-18-2009 06:29 AM by Pete_Jud | 11 comments »

I just ran 300 feet of 1.5 inch doug fir stair treads over a 3/4 inch Freud roundover bit on the router table to bullnose the work. I was very concerned about “tearout” as the old growth doug fir had a lot of tight knots in it. I had no tearout at all, and the I cut the bullnose in just 1 pass per side. The work is ready to install without any sanding. Great finnish. And almost no pitch buildup on the bit. This is the first Quadra-Cut bit that I have used, and I am impressed.

Read this review »


Great Thin Kerf Bulk Ripper

Great Thin Kerf Bulk Ripper

06-13-2009 03:23 PM by knotscott | 5 comments »

The Freud LU87R010 is a 10” 24 tooth thin kerf (TK) ripping blade that features a red “Permashield” coating for reduced friction and corrosion resistance, laser cut anti-vibration/anti-noise expansion slots, flat top ground teeth (FTG) for efficient material removal, and an aggressive 20 degree hook angle for a fast feed rate. The LU87 is the TK counterpart to the LM72R010, and is part of Freud’s “Industrial” series. Rip blades are designed to make fast ...

Read this review »


Butterfly Inlays Made Easy

Butterfly Inlays Made Easy

03-21-2009 01:25 AM by knotscott | 7 comments »

Even for a first timer, this inlay kit worked flawlessly as advertised. Using just basic router skills, it couldn’t be much simpler. Put the bit and the guide bushing in the router, trace the template to cut the receiving hole, add the spacer to trace out the inlay with the same template, cut the inlay piece free from the stock, and place it in the complimenting cutout hole. Some sanding may be required to make everything flush, and a practice run is always a good idea. The tip of the ...

Read this review »


Freud 2 1/4 HP Variable Speed Router Model FT1700VCE

Freud 2 1/4 HP Variable Speed Router Model FT1700VCE

02-21-2009 03:23 AM by Straightpiped | 13 comments »

Just got this in the mail. Haven’t had a chance to use it yet. I wanted to get this up before the Woodcraft sale went away. $99 with free shipping. This is my second router, my first is a Black and Decker plunge router. This router appears to be quality built. Smooth base adjustment with two different style adjustment knobs that can be switched. Both 1/4” and 1/2” collets. Adjustable speed from 10,000-23,000 RPM. Also comes with a nice case, which is a huge bonus to...

Read this review »


Freud LU87R010 10” thin kerf 24 tooth rip blade ROCKS!!!

Freud LU87R010 10” thin kerf 24 tooth rip blade ROCKS!!!

02-19-2009 01:26 AM by klpete45 | 9 comments »

I bought this blade last year when I had a considerable quantity of rough-cut walnut to process. My saw at that time was a Ryobi BT3000. While it did manage to rip full 2”thick boards with a 40 tooth combo blade, it did struggle and left a lot of burn marks. So I did a little internet research and settled on the Freud blade since the manufacturer claimed “This blade gives new life to underpowered table saws…..”and the fact that I could get it online for under $50 made it hard to resist. I fre...

Read this review »


Box Joints Made Easy on Your Table Saw...

Box Joints Made Easy on Your Table Saw...

02-29-2008 09:33 AM by cajunpen | 12 comments »

I love box joints, they are easy to construct, look great and when cut and assembled correctly are as strong a joint as any you can cut. The Freud 8” Box Joint Cutters do one thing and one thing only – they cut perfectly flat box joints on your table saw. You have two size joints that you can cut, either 3/8” or 1/4”. The slot width is determined by the way that you arrange the blades. It all begins with a shop made jig, which attaches to your Miter Gauge. Basic...

Read this review »


« prev 1 2 3 4 5 6 next »
53 reviews

Add new review
View Product Index
RSS FEED

Browse reviews

categories | brands | all reviews


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com