LumberJocks

All Replies on Looking for more stain brands

  • Advertise with us
View Medici's profile

Looking for more stain brands

by Medici
posted 09-19-2017 02:57 AM


10 replies so far

View a1Jim's profile

a1Jim

117166 posts in 3659 days


#1 posted 09-19-2017 03:03 AM

Pretty hard to bet General Finishes.

-- https://www.artisticwoodstudio.com/videos wood crafting & woodworking classes

View GR8HUNTER's profile

GR8HUNTER

4337 posts in 795 days


#2 posted 09-19-2017 03:21 AM

as Jim says GF is an excellent stain …. I also have used SW and really like that a lot ….but more expensive :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View oldnovice's profile

oldnovice

7017 posts in 3450 days


#3 posted 09-19-2017 03:50 AM

I used GF when I live in Illinois and left them all there because of the CA hazmat transport for movers rules.
I will be ordering some soon as the law does not stop me from buying it.
I really love their finishes, they are hard to beat!

-- "I never met a board I didn't like!"

View Rich's profile (online now)

Rich

3340 posts in 672 days


#4 posted 09-19-2017 03:56 AM

If you want more variety in your finishes, TransTint dyes, TransFast dyes and Mixol pigments might be of interest. The dyes are very versatile and do a nice job of coloring without obscuring the grain. Mixol is probably the most versatile, but since it is a pigment, the result can get a little muddy. However, you can put it in anything, with any combination of colors.

-- Half of what we read or hear about finishing is right. We just don’t know which half! — Bob Flexner

View AlaskaGuy's profile

AlaskaGuy

4269 posts in 2391 days


#5 posted 09-19-2017 06:15 AM

I try to avoid stain when ever possible. When I can’t I like Old Masters. Open the can and it look like pea soup not colored water.

http://myoldmasters.com/product/wiping-stain/

I see some of the boys over at the woodweb professional finishing forum recommend Mohawk as an excellent stain.

-- Alaskan's for Global warming!

View Medici's profile

Medici

50 posts in 664 days


#6 posted 09-19-2017 10:17 AM



I try to avoid stain when ever possible. When I can t I like Old Masters. Open the can and it look like pea soup not colored water.

http://myoldmasters.com/product/wiping-stain/

I see some of the boys over at the woodweb professional finishing forum recommend Mohawk as an excellent stain.

- AlaskaGuy

I’ll check them. And I’m asking because even though I personally like natural finishes, I get a lot of requests for stained finishes as well.


If you want more variety in your finishes, TransTint dyes, TransFast dyes and Mixol pigments might be of interest. The dyes are very versatile and do a nice job of coloring without obscuring the grain. Mixol is probably the most versatile, but since it is a pigment, the result can get a little muddy. However, you can put it in anything, with any combination of colors.

- Rich

I’ll check them out, thanks!


If you want more variety in your finishes, TransTint dyes, TransFast dyes and Mixol pigments might be of interest. The dyes are very versatile and do a nice job of coloring without obscuring the grain. Mixol is probably the most versatile, but since it is a pigment, the result can get a little muddy. However, you can put it in anything, with any combination of colors.

- Rich


Pretty hard to bet General Finishes.

- a1Jim

True, but a lot of their stuff is water based, and I’m not interested as much in water based.

View OSU55's profile

OSU55

1787 posts in 2072 days


#7 posted 09-19-2017 11:52 AM

I add at least some color to all projects, but use dyes vs stains (no large pigment particles). Prefer Transtint dye which will mix with h2o, alcohol, and solvent lacquer. Can be used with GF wb dyes to alter a color. I prefer Target WR4000 stain base with Transtint. For oil based, WD Lockwood has powders (I use naptha as carrier). Use a little poly for solids content to keep the dye from mixing back into the topcoat. Dyes have a learning curve but are more forgiving and easier once sorted out.

View Medici's profile

Medici

50 posts in 664 days


#8 posted 09-19-2017 01:37 PM



I add at least some color to all projects, but use dyes vs stains (no large pigment particles). Prefer Transtint dye which will mix with h2o, alcohol, and solvent lacquer. Can be used with GF wb dyes to alter a color. I prefer Target WR4000 stain base with Transtint. For oil based, WD Lockwood has powders (I use naptha as carrier). Use a little poly for solids content to keep the dye from mixing back into the topcoat. Dyes have a learning curve but are more forgiving and easier once sorted out.

- OSU55

Thanks OSU55, always helpful.

View mikeber's profile

mikeber

28 posts in 942 days


#9 posted 09-19-2017 11:02 PM

Although no first hand experience, I’d like to mention the less known Bartley Gels (some people speak highly of them) and this small company:
.sutherlandwelles.com

View barada83's profile

barada83

86 posts in 1269 days


#10 posted 09-21-2017 03:55 AM

Sherwin Williams has a water based wiping stain that I have been using for a bit now. It’s compatible with the water based lacquer line they carry and can be used as a traditional wiping stain, spray stain, and toner. Pretty great stuff. Dries in 30 min and ready for top coat. Aside from that, I use transtint for stuff I color match on site because of the ease of use.

-- Mike

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com